WO3–TiO2 monolithic catalysts for high temperature SCR of NO by NH3: Influence of preparation method on structural and physico-chemical properties, activity and durability

The WO₃–TiO₂ catalysts with different WO₃ loadings prepared by the coprecipitation method were investigated in comparison with those prepared by the conventional impregnation method for the activity and durability in the high temperature SCR of NO by NH₃ and the structural and physico-chemical properties which were characterized by BET and XRD measurements, IR, Raman and XPS spectroscopies. The catalyst prepared by coprecipitation, as compared with that prepared by impregnation, was found to exhibit a higher SCR activity at high temperatures and also to possess a larger surface area, higher Brønsted acidity and larger monolayer capacity of the support with WO₃. Increasing the WO₃ loading of the catalysts enhances the SCR activity and simultaneously increases the Brønsted acidity. The observed improvement of SCR activity for the catalyst prepared by coprecipitation is mainly attributed to the higher Brønsted acidity and the presence of the more highly dispersed WO₃ species which is suggested by the larger monolayer capacity of ca. 13 μmol(W)/m² and no crystalline WO₃ on TiO₂ detected with XRD at the high WO₃ loading up to 40 wt.%. The catalyst with 20 wt.% WO₃, as compared with that prepared by impregnation, was found to exhibit a better thermal durability at high temperatures from 550 to 600 °C. The better durability is attributed to that the reduction of the surface area and the formation and subsequent growth of crystalline WO₃ upon aging are more remarkably inhibited.     

适用于小型岩石试件的三轴压缩试验技术与设备的开发及其应用

为了用有限的岩石试样在室内进行大量的岩石力学试验测试，对直径10mm、长度20mm的小型岩石试件进行开发、制作。同时对S．Okubo等（2002）开发的透明围压容器进行改进，其围压可达10MPa左右。用此改进的试验设备对小型岩石试件进行三轴压缩试验。通过对田下凝灰岩的试验，由小型试件得到的力学参数——黏聚力和内摩擦角，与用常规试件获得的试验结果相一致。而且在载荷速率交替变换的试验中，用一个小型试件就可获得应力一应变曲线的载荷速率相关性。通过对三峡库区周边滑坡地带采集的岩石试样的测试，成功获得不同岩石的强度特性曲线及表示载荷速率相关性的参数。     

Mercury contamination in the Yatsushiro Sea, south-western Japan: spatial variations of mercury in sediment

Mercury-contaminated effluent was discharged into Minamata Bay from a chemical plant over a 20-year period until 1965 (from 1958 to 1959, effluent was discharged into Minamata River), causing Minamata disease. In an effort to characterize the extent of the contamination in the Yatsushiro Sea, the vertical and horizontal distributions of mercury in sediment were investigated. Sediment was sampled at 62 locations in the southern part of the sea from 4 to 6 March 1996. In the lower layers of the long cores of sediment, the total amount of mercury was at a relatively uniform low concentration. We interpret these low values to represent the background concentration absent of anthropogenic influence. The background value thus estimated for the Yatsushiro Sea was 0.059 +/- 0.013 mg kg(-1) (mean +/- S.D., n = 51). The highest concentration in each sample ranged from 0.086 to 3.46 mg kg(-1) (mean, 0.57 mg kg(-1)). The higher values were obtained at stations near Minamata Bay and the Minamata River (the sources of the pollution). Concentrations decreased with distance from the source. An inspection of the vertical profiles of mercury concentration in cores suggested that the deposited mercury had not been fixed in sediment but had been transported, despite 30 years having past since the last discharge of contaminated effluent. At nine stations, extractable inorganic and organic mercury concentrations were determined differentially. Inorganic mercury is the predominant species in sediment and organic mercury comprising approximately 1% of the total.     

Effect of dehydration and urea on stability of homosulfamine in solid states

In the presence of urea in solid states, the stability of unpulverized homosulfamine hydrate (phase I; UHH) is significantly decreased whereas that of unpulverized homosulfamine anhydrate (UHA) is not. The stability of UHH is decreased slightly more by pulverization (PHH). The major objective of this study was to investigate the effects of urea, dehydration, and pulverization on the stability of homosulfamine in solid states. Binary mixtures of UHH and urea, PHH and urea, and UHA and urea in a ratio of 1:1 (wt/wt) were prepared as physical mixtures and were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier transform infrared (FTIR) spectroscopy to study their appearance and structural changes before and after storage. PXRD analysis revealed that physical mixtures comprising UHH and urea and PHH and urea have the same diffraction pattern as that of the mixture of UHA and urea after preparation. The dehydration rate of the crystal water of UHH was accelerated by the presence of urea in addition to pulverization. Moreover, the PXRD patterns of the physical mixtures of UHH/urea and PHH/urea were significantly altered during storage, whereas that of UHA/urea was not, which was consistent with the SEM and FTIR results. The particle shape and appearance of UHH varied significantly as a result of pulverization. The stability of homosulfamine was influenced not only by the presence of urea and dehydration but also by the surface state and particle size of the crystalline form.     

Effect of nitrate on corrosion of austenitic stainless steel in boiling nitric acid solution containing chromium ions

The oxidation behavior of chromium and the corrosion behavior of austenitic stainless steel in boiling nitric acid solution containing highly concentrated nitrates were investigated using UV-visible spectroscopic measurements, Raman spectral measurements, immersion tests, and potentiodynamic polarization measurements. The oxidation rate measurement of chromium from Cr(III) to Cr(VI) was performed by 1 M boiling nitric acid solution containing each highly concentrated nitrates: Al(NO₃)₃, Nd(NO₃)₃, Ca(NO₃)₂, Mg(NO₃)₂, and NaNO₃ as a simulant of uranium nitrate in uranium concentrator in reprocessing plants. As a result, the rate of chromium oxidation was different depending on the added nitrates even at the same nitric acid concentration. In addition, the oxidation rate of chromium was increased with increasing the calculated partial pressure of nitric acid in consideration of the hydration of cation of nitrates. Furthermore, the corrosion rate of type 310 stainless steel was accelerated by the solution having a high chromium oxidation rate containing nitrates. These results indicated that the acceleration of the corrosion rate in the solutions depending on the oxidation rate of chromium, and the rate is affected by the salt-effect of nitrates.     

自确认压力传感器结构参数设计及其有限元分析

设计了自确认压力传感器弹性体的结构参数,包括弹性体的材料选择,弹性体的形状、厚度和半径,建立了应变片在弹性体上的多组布片方案,为压力传感器实现自确认功能奠定了基础.应用有限元分析软件ANSYS对所设计的传感器弹性体进行了动、静态分析,获得了弹性体在受力情况下的位移、应力、应变分布状态,并且计算了弹性体的固有频率,分析结果表明,所设计的弹性体满足自确认压力传感器的设计要求.     

Effects of the SiC/Al interface reaction on fracture behavior of a composite conductor using SiC fiber reinforced aluminum for next generation power equipment

Electrical power demands are increasing every year, meaning that lightweight electric cable is needed which has high transmission capacity, high thermal resistance and low sag. Tokyo Electric Power Co., Chubu Electric Power Co. and Hitachi Cable Ltd. have been breaking new ground in the field of electric cable through the development of a SiC fiber reinforced aluminum conductor. In this work, the SiC/Al interface reaction during the manufacturing process and the electricity transmission temperature were studied by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and field emission-Auger electron spectroscopy (FE-AES) for long-term reliability assessment. No reaction products were detected at the SiC/Al interface of elemental wire consisting of 7 SiC/Al preformed wires, indicating that the wire manufacturing process was reliable. An Al₄C₃ product was detected locally at the SiC/Al interface of the wire which had been thermally treated in molten Al under unfavorable conditions. The activation energy, Q, of Al₄C₃ growth at the SiC/Al interface was about 190 kJ/mol. In the temperature range of electricity transmission, Al atoms diffused into SiC fiber during heat treatment, and the amount of the diffused Al increased with increasing treatment temperature and holding time. The activation energy of Al diffusion through the SiC/Al interface to SiC fiber was about 78 kJ/mol. Strength deterioration was not induced by Al diffusion into SiC fiber, but strength strongly depended on the formation of Al₂SiO₅ compound at the SiC/Al interface above 400°C transmission temperatures. Kinetics calculations indicated that the rate of strength deterioration of the composite cable, held at 300°C for 36 years, was about 5%, so that practical use of SiC/Al composite cable should not be far in the future.     

High Atom Efficiency in Sc(OTf)3‐Catalyzed Allylation of Aldehydes with Tetraallyltin

The high atom efficiency was achieved through addition of Ac₂O in the Sc(OTf)₃‐catalyzed allylation of aldehyde with tetraallytin in a 4 : 1 molar ratio.     

Online tuning method of stator and rotor resistances in both motoring and regenerating operations for vector‐controlled induction machines

The vector control of induction motors is widely used. This method needs accurate motor parameter but the stator and rotor resistance vary due to motor temperature variation. If the value of resistance in the controller can be set up accurately at first, there must be a difference between the reference and real value of torque because of drift of the resistance. It is necessary to adapt the resistance value. The indirect field‐oriented control of an induction motor requires the value of rotor resistance only, but the direct field‐oriented control method with rotor flux observer requires the value of not only rotor resistance but also stator resistance in the controller. Consequently, it is necessary to adapt both stator resistance and rotor resistance. A parameter adaptation scheme has previously been proposed for the direct field‐oriented control method with rotor flux observer, but this method cannot be used when the motor is in regenerating operation. In this paper, a new stator and rotor resistance adaptation scheme is proposed, which can be applied when the motor is in regenerating operation. The usefulness of the proposed adaptation scheme is confirmed by simulation. © 2001 Scripta Technica, Electr Eng Jpn, 135(1): 56–64, 2001