Design and manufacturing of end plates of a 5 kW PEM fuel cell

End plate is one of the main components of the proton exchange membrane (PEM) fuel cells. The major role of the end plate is providing uniform pressure distribution between various components of the fuel cell (bipolar plates, etc.) and consequently reducing contact resistance between them. In this study a procedure for design of end plate has been developed. At first a suitable material was selected using various criteria. Then a finite element (FE) analysis was accomplished to analyze end plate deflections and get its optimized thickness. After fabricating the end plates, a single cell was assembled and electrochemical impedance spectroscopy (EIS) tests were carried out to ensure their good operation. A 5 kW fuel cell assembled with these end plates was tested at different operating conditions. The test results show an appropriate assembly pressure distribution inside the stack which indicates good performance of the designed end plates.     

Physico-chemical,morphological and thermal analysis for the combined pozzolanic activities of minerals additives

The research was aimed to evaluate the physico-chemical, morphological and thermal analysis of combined pozzolanic activities of minerals additives. Fly ash and ground granulated blast furnace slag were added, separately and collectively, as mineral replacement in ordinary Portland cement. Tests carried out on specimens cured at different ages were: compressive strength, ultrasonic pulse velocity, X-ray diffraction (XRD) analysis, scanning electron microscopic (SEM) studies, differential thermal analysis (DTA) and thermo-gravimetric analysis (TGA), etc. The results indicated that the compressive strength and ultrasonic pulse velocity development rate of concrete specimens were significantly influenced by the addition of mineral additives. SEM data showed that the fly ash particles were more embedded and surrounded by slag. XRD analysis and DTA/TGA investigation have revealed different reaction kinetics of paste. The peak intensity of calcium hydroxide was significantly retarded by the addition of fly ash and slag, especially in combination, attributed to the dilution effect and calcium hydroxide consumption by pozzolanic reaction.     

Vasculature Segmentation in MRA Images Using Gradient Compensated Geodesic Active Contours

Precise segmentation of vasculature from three-dimensional (3D) magnetic resonance angiography (MRA) images is playing an important role in image-guided neurosurgery, pre-operation planning and clinical analysis. Active Contour based evolution algorithms are being widely applied to MRA data sets, however existing approaches exhibit some difficulties in extracting tiny parts of the vessels. Our objective is to develop an automated segmentation scheme to accurately extract vasculature of the brain, especially tiny vessels. Inspired by the intrinsic properties of MRA, we have proposed a scheme called the gradient compensated geodesic active contours (GCGAC), which compensates for low gradients near edges of thin vessels. The GCGAC, which is implemented based on level set, has been tested on both synthetic volumetric image and real 3D MRA images. Our experiments show that the introduced gradient compensation can facilitate more accurate segmentation of tiny blood vessels.     

Dry sliding wear in case-hardened niobium microalloyed steels

Low-carbon steel samples containing a small addition of niobium singly or in combination with nitrogen have been carburized in a natural Titas gas atmosphere at 950 °C and 15 psi gas pressure for different time periods. At the end of the predetermined time period, the specimens were pre-cooled to 860 °C in the furnace and quenched in 10% brine. One set of the quenched specimens was tempered at a low temperature of 160 °C and the other set was sub-zero treated at −195 °C in liquid nitrogen, followed by tempering at the same tempering temperature. Surface hardness was measured by Rockwell hardness testing machine and optical microscopy was performed on etched samples. Using a pin-on-disc type apparatus, wear test was carried out under dry sliding condition to assess the beneficial effect of niobium and niobium with nitrogen on the wear properties of the carburized and hardened low-carbon steels in relation to the resulted surface hardness and microstructures.

It has been found that niobium with or without nitrogen improves the wear resistance under both the heat treatment conditions. Niobium with nitrogen is more effective than niobium in improving the wear resistance. Whatever was the heat treatment condition, the wear rate of the specimens increases for all the steels as the carburizing time increases. It has also been found that samples with sub-zero treatment always have higher wear resistance than that of samples without sub-zero treatment. Niobium singly or in combination with nitrogen has been found as a modifier of the wear mechanism.     

Influence of polymerization conditions on the template free synthesis of nanoparticles of poly (1-naphthylamine)

The present article highlights some preliminary investigations on the role of oxidant and medium on the nanostructured morphology of poly (1-naphthylamine) (PNA) prepared via chemical oxidative polymerization. Results revealed that the nano morphology can be controlled under appropriate preparative conditions. The particle sizes were obtained in the range of 5–50 nm exhibiting a much smaller range than polyaniline (PANI) nanoparticles synthesized under similar conditions.     

EFFECT OF MTBE BLENDING ON THE PROPERTIES OF GASOLINE

The effect of blending MTBE in the gasoline was evaluated. MTBE effectively boost the octane numbers of gasoline without adversely effecting its other properties. However, MTBE is not as efficient as leadalkyl compounds as far as the specific octane number improvements are concerned. The addition of 5 to 30 volume percent MTBE increases 1.9 to 11.8 RON of a typical gasoline. MTBE addition also extends the volume of gasoline produces for a given crude by adding volume to the gasoline pool. MTBE provides much higher FEON to the gasoline in comparison with other gasoline components. A higher FEON increases the efficiency of the engine. MTBE is not affected by the lead level of the gasoline. For this reason, lost octane in future lead reductions of the gasoline in Saudi Arabia can be made up with MTBE. MTBE addition to the Saudi gasoline increases the RVP but within the specification of the gasoline. MTBE has favorable effect on the distillation characteristics of the gasoline. MTBE addition lowers the distillation temperature which improves driveability and cold engine operation. MTBEgasoline blends were found free of gums and peroxides after long term storage and pose no phase separation problems in the presence of water. MTBE is miscible in gasoline in all proportions and its solubility in water is low.     

Effect of aspirin on prostaglandin E2 and leukotriene B4 production in human colonic mucosa from cancer patients

Elderly persons typically show diminished immune responsiveness to influenza vaccination. Chiron Vaccines has developed a novel oil-in-water adjuvant emulsion, MF59, to enhance vaccine immunogenicity without compromising safety and tolerability. MF59 was shown to augment influenza vaccine immunogenicity in senescent mice. Subsequently, eight similarly designed, randomized, controlled clinical trials of a subunit influenza vaccine combined with MF59 were conducted between 1992 and 1995 in 1807 elderly volunteers (> or = 65 years old). Mild, transient, injection-site reactions were increased with MF59, but systemic reactions generally were not. For two of the three vaccine antigens (B and A/H3N2), postimmunization haemagglutinin inhibition geometric mean titres were statistically significantly higher with MF59. During influenza season, fewer deaths occurred among MF59 recipients. This development programme demonstrates how an adjuvant that stimulates effectors associated with immunosenescence can improve the performance of an existing vaccine in elderly persons.     

A review of the stabilization of tropical lowland peats

The Deep Mixing Method, which involves the formation of in situ stabilized peat columns, is suitable for deep peat stabilization, whereas the mass stabilization technique is used to stabilize the soil of shallow peat deposits instead of the costly and problematic removal and replacement method. The concept of soil-cement stabilization involves the addition of water to cement, resulting in a chemical process known as cement hydration. Stabilization of peat by cement, which requires a significant strength increase in the cement-stabilized peat or organic soil, is attributed largely to physicochemical reactions that include cement hydration, hardening of the resulting cement paste and interactions between soil substances and primary and secondary cementation hydration products. The factors that affect these physicochemical reactions and the interactions of peat soil-cementation products that influence peat stabilization are the amount of solid particles, the water: soil ratio, the quantity of binder, the presence of humic and/or fulvic acids, the soil pH and the amount of organic matter in the peat. With the Air Curing Technique, stabilized peat samples for unconfined compressive strength (UCS) tests were kept at a normal air temperature of 30 ± 2 °C and strengthened by gradual moisture content reduction instead of the usual water-curing technique or water submersion methods that have been common practice in past experiments involving the stabilization of peat with cement. The principle of using the Air Curing Technique to strengthen stabilized peat is that peat soil at its natural moisture content contains sufficient water (water content from 198 to 417 %) that, when mixed with cement, a curing process takes place that causes the stabilized peat soil to gradually lose its moisture content and to become drier and harder throughout the curing period. This process does not require the addition of water.     

Preparation,characterization, viscosity,and thermal conductivity of nitrogen-doped graphene aqueous nanofluids

Nanofluids perform a crucial role in the development of newer technologies ideal for industrial purposes. In this study, Nitrogen-doped graphene (NDG) nanofluids, with varying concentrations of nanoparticles (0.01, 0.02, 0.04, and 0.06 wt%) were prepared using the two-step method in a 0.025 wt% Triton X-100 (as a surfactant) aqueous solution as a base. Stability, zeta potential, thermal conductivity, viscosity, specific heat, and electrical conductivity of nanofluids containing NDG particles were studied. The stability of the nanofluids was investigated by UV–vis over a time span of 6 months and concentrations remain relatively constant while the maximum relative concentration reduction was 20 %. The thermal conductivity of nanofluids was increased with the particle concentration and temperature, while the maximum enhancement was about 36.78 % for a nanoparticle loading of 0.06 wt%. These experimental results compared with some theoretical models including Maxwell and Nan’s models and observed a good agreement between Nan’s model and the experimental results. Study of the rheological properties of NDG nanofluids reveals that it followed the Newtonian behaviors, where viscosity decreased linearly with the rise of temperature. It has been observed that the specific heat of NDG nanofluid reduced gradually with the increase of concentration of nanoparticles and temperature. The electrical conductivity of the NDG nanofluids enhanced significantly due to the dispersion of NDG in the base fluid. This novel type of fluids demonstrates an outstanding potential for use as innovative heat transfer fluids in medium-temperature systems such as solar collectors.