浅析电梯减行程缓冲器

摘要：阐述了GB7588—2003《电梯制造与安装安全规范》对减行程缓冲器的定义,说明了该装置对解决电梯井道顶层空间和底坑深度不足的作用,并通过具体的实例分析了减行程缓冲器的功能和结构。     

Fabrication of nanograined silicon by high-pressure torsion

This paper describes fabrication of Si nanograins through allotropic phase transformation by concurrent application of high pressure and intense straining using high-pressure torsion (HPT). Single-crystalline Si(100) wafers were processed by HPT under a pressure of 24 GPa at room temperature. X-ray diffraction and Raman analysis revealed that the HPT-processed samples were composed of metastable Si-III and Si-XII phases and amorphous phases in addition to the original diamond-cubic Si-I phase. It was found that nanograins formed because the Si-I diamond phase had transformed to high-pressure phases (Si-II, Si-XI, and Si-V) having metallic nature, and it then became easier to generate a high density of dislocations to form grain boundaries. The high-pressure phases were further transformed to the Si-XII and Si-III phases via the Si-II phase upon unloading and they existed as metastable phases at ambient pressure. Subsequent annealing at 873 K gave rise to reverse transformation to Si-I but with nanograin sizes. Although no appreciable photoluminescence (PL) peak was observed from the HPT-processed sample, a broad PL peak centered around 600 nm was detected from the annealed sample due to quantum confinement in the Si-I nanograins.     

Donor–acceptor-structured 1,4-diazatriphenylene derivatives exhibiting thermally activated delayed fluorescence: design and synthesis,photophysical properties and OLED characteristics

A new series of luminescent 1,4-diazatriphenylene (ATP) derivatives with various peripheral donor units, including phenoxazine, 9,9-dimethylacridane and 3-(diphenylamino)carbazole, is synthesized and characterized as thermally activated delayed fluorescence (TADF) emitters. The influence of the donor substituents on the electronic and photophysical properties of the materials is investigated by theoretical calculations and experimental spectroscopic measurements. These ATP-based molecules with donor–acceptor–donor (D–A–D) structures can reduce the singlet–triplet energy gap (0.04–0.26 eV) upon chemical modification of the ATP core, and thus exhibit obvious TADF characteristics in solution and doped thin films. As a demonstration of the potential of these materials, organic light-emitting diodes containing the D–A–D-structured ATP derivatives as emitters are fabricated and tested. External electroluminescence quantum efficiencies above 12% and 8% for green- and sky-blue-emitting devices, respectively, are achieved.     

Preparation of Alumina Fiber-Reinforced Aluminum by Squeeze Casting and Their Machinability

Alumina fiber-reinforced aluminum alloy composites were prepared by squeeze casting, and the effect of the reinforcement on the machinability of the alloy was investigated. Two kinds of short alumina fibers, which have the same fiber size but different hardness, were used. Preform in which the fibers were in a random arrangement was formed with SiO₂ binder, and then was infiltrated with the alloy melt to prepare the composite. The fiber–matrix interfacial bond via the binder is sufficient and no reaction product was detected. The cutting force of the alloy was reduced by the fiber-reinforcement. The lower the hardness of the fiber in the composite, the lower the cutting force of the composite. The roughness of the machined surface was drastically decreased by the reinforcement. Observation of the chip formed on the machined surface indicated that the fiber suppressed the formation of the built-up-edge, and this fact would lead to the reduction in the surface roughness by the reinforcement. The chips were shortened by the reinforcement. The difference in hardness of the alumina fiber hardly affected the roughness and the chip morphology. The hardness of the fiber has a strong effect to decrease the tool life.     

Control of the coating layer thickness of TiO2–SiO2 core–shell hybrid particles by liquid phase deposition

This paper describes control of the coating layer thickness and the crystallite size of the core–shell hybrid particles by controlling the process parameter. The core–shell hybrid particles were prepared using liquid phase deposition (LPD). We confirmed that the homogeneous coating was attained from the result of the zeta potential and the transmission electron microscope (TEM) observation. Furthermore, the coating layer microstructure was estimated using Brunauer–Emmett–Teller (BET) method. The obtained coating layer of titania was estimated using the band gap energy. Results indicate that the blue shift of the band gap energy signifies that the physical property of the hybrid particles was controlled by the coating layer thickness and the crystallite size, which are determined by the processing parameters.     

Strain-mediated phase control and electrolyte-gating of electron-doped manganites

A prototype Mott transistor, the electric double layer transistor with a strained CaMnO(3) thin film, is fabricated. As predicted by the strain phase diagram of electron-doped manganite films, the device with the compressively strained CaMnO(3) exhibits an immense conductivity modulation upon applying a tiny gate voltage of 2 V.     

Influence of different feeding systems on the growth performance and muscle development of Japanese Black steers

This study investigated the growth performance and gene expression for muscle development between grass hay-fed (GH) and concentrate-fed (CT) steers. Daily gain and energy intake during the fattening period of the GH group were lower than those of the CT group. Analysis of C/EBPα, PPARγ2, myosin heavy chain (MHC), and myostatin gene expressions was performed by real-time PCR. Expressions of C/EBPα and myostatin in semitendinosus and longissimus lumborum (LL) muscles were higher in the CT group than in the GH group at the end of fattening. In LL muscle, MHC expression at the end of fattening was greater in the GH group than in the CT group. These results suggest that regulation of adipogenesis and myogenesis by the expression of genes involved in muscle development might have occurred in the skeletal muscle of the GH group by the feeding of grass hay and/or because of the low energy intakes.     

Clockless Stochastic Decoding of Low-Density Parity-Check Codes: Architecture and Simulation Model

This paper introduces clockless stochastic decoding for high-throughput low-density parity-check (LDPC) decoders. Stochastic computation provides ultra-low-complexity hardware using simple logic gates. Clockless decoding eliminates global clocking, which eases the worst-case timing restrictions of synchronous stochastic decoders. The lack of synchronization might use outdated bits to update outputs in computation nodes; however, it does not significantly affect output probabilities. A timing model of clockless-computation behaviours under a 90 nm CMOS technology is used to simulate the BER performance of the proposed decoding scheme. Based on our models, the proposed decoding scheme significantly reduces error floors due to the “lock-up” problem and achieves superior BER performance compared with conventional synchronous stochastic decoders. The timing model includes metastability to verify the affect on BER performance.