Bilateral polynomial matrix equations in two indeterminates

Two special cases of the bilateral 2-D polynomial matrix equationDU +VN=C whenC=I andC=I with being a -stable 2-D polynomial, which are related respectively to deadbeat and asymptotic control problems of 2-D systems, are first considered. By generalizing the concepts of factor coprimeness, zero coprimeness and zero skew primeness in the 2-D polynomial ring to the ring of causal -stable 2-D rational functions, a constructive solution of these two problems mentioned is proposed. Based on these results, we derive a solvability condition for the bilateral equiation whereC is a general 2-D polynomial matrix. The general solutions are investigated as well.     

Propagation characteristics in open-groove waveguides surrounded by rough sidewalls

The radio propagation characteristics in groove-shaped roads surrounded by rough surface sidewalls are presented. Typical sidewalls are snowpack in heavy snow regions or buildings in urban areas. In this analysis, such roads are modeled by a straight groove waveguide with statistically rough sidewalls. A simple geometrical optical approach is applied to calculate the field strength along the longitudinal direction of the road as well as transversely across the road. The theoretical results are compared with previously presented experimental results. The theoretical results show that the surface roughness causes an additional propagation loss in regions far from the transmitting point and that the field strength in the cross section exhibits a cosine distribution with a slightly changing magnitude. These theoretical characteristics agree with the experimental results.<>     

A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

Earth‐Abundant and Durable Nanoporous Catalyst for Exhaust‐Gas Conversion

Precious metals (Pt and Pd) and rare earth elements (Ce in the form of CeO₂) are typical materials for heterogeneous exhaust‐gas catalysts in automotive systems. However, their limited resources and high market‐driven prices are principal issues in realizing the path toward a more sustainable society. In this regard, herein, a nanoporous NiCuMnO catalyst, which is both abundant and durable, is synthesized by one‐step free dealloying. The catalyst thus developed exhibits catalytic activity and durability for NO reduction and CO oxidation. Microstructure characterization indicates a distinct structural feature: catalytically active Cu/CuO regions are tangled with a stable nanoporous NiMnO network after activation. The results obtained by in situ transmission electron microscopy during NO reduction clearly capture the unique reaction‐induced self‐transformation of the nanostructure. This finding can possibly pave the way for the design of new catalysts for the conversion of exhaust gas based on the element strategy.     

Receiver sensitivity temperature dependence of small detectable area Hi-Lo germanium avalanche photodiode

Optical receiver sensitivity temperature dependence is measured in different detectable area (80, 30 ?m-diameter) Hi-Lo Ge APD modules at 450 Mbit/s bit rates. A 30 ?m-diameter device has a little power penalty against temperature increase compared with an 80 ?m-diameter device, with 2.4 dB receiver sensitivity improvement at 45°C.     

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

High-cycle fatigue features of over 10⁸ cycles, particularly the initiation and propagation of edge delamination considering the effects of transverse cracks, were investigated using quasi-isotropic carbon-fiber-reinforced plastic (CFRP) laminates with a stacking sequence of [45/0/−45/90]_s in this study. In the relationship between a transverse crack density and initiation and growth of edge delamination, it was found that fatigue damage growth behavior varied depending on applied stress. It was observed that edge delamination initiated and grew at parts where transverse cracks were dense at ordinary applied stress, whereas it was observed that edge delamination grew before or simultaneously with transverse crack propagation at a low applied stress and high-cycle loading. In addition, the critical transverse crack density where delamination begins growing was calculated to evaluate the interaction between transverse crack and edge delamination growth.     

Effect of Temperature Change on Interfacial Behavior of an Acoustically Levitated Droplet

Under the microgravity environment, new and high quality materials with a homogeneous crystal structure are expected to be manufactured by undercooling solidification, since the material manufacturing under the microgravity environment is more static than that under the normal gravity. However, the temperature change on the interface of the material in space can affect on the material processing. The purpose of the present study is to investigate effect of the temperature change of interface on the large levitated droplet interface. A water droplet levitated by the acoustic standing wave is heated by YAG laser. In order to heat the water droplet by the laser heating, rhodamine 6G is solved in it to achieve high absorbance of the laser. The droplet diameter is from 4 to 5.5 mm. The deformation of the droplet interface is observed by high speed video camera. The temperature of droplet is measured by the radiation thermometer. It is noticed that the larger droplet under the higher sound pressure tends to oscillate remarkably by the laser heating.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

The performance of a distributed combat simulation with the time warp operating system

This paper analyzes the performance of a discrete-event combat simulation executed on a parallel processor under control of the Time Warp Operating System. Time Warp is in a class of distributed simulation methods called Optimistic methods which have proven to be useful over a wide range of simulations. The combat simulation used for this performance study, called STB88, is a division-corps model incorporating a number of different types of computations. The speed-up for three versions of this model on the Caltech/JPL Mark III Hypercube and the BBN Butterfly parallel processors was measured relative to an efficient sequential execution of the same model on the same hardware. The results indicate that STB88 version 1 achieves a speed-up of 28.6 on 60 Mark III processors, while STB88 version 2 achieves a speed-up of 36.8 on 100 Butterfly processors. Version 3 of STB88 achieved a speed-up of 38.5 on 128 Mark III processors. The versions differed only in their interface to Time Warp. On the Butterfly, the sequential execution completed in 2 hours, while the 100 processor execution completed in 3.2 minutes.