The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

New polymerization of dienes and related monomers catalyzed by late transition metal complexes

This article reviews recent studies on the polymerization of 1,6-heptadienes and 2-aryl- and 2-alkoxy-1-methylenecyclopropanes catalyzed by Co, Fe, and Pd complexes. Co and Fe complexes with bis(imino)pyridine ligands catalyze the cyclopolymerization of 1,6-heptadiene in the presence of MMAO to produce the polymer, which contains five-membered rings in the monomer units. The polymers with cis- or trans-five-membered rings are obtained selectively, depending on the complex used in the polymerization. The catalyst, prepared from the Co complex having a bis(imino)pyridine ligand and MMAO, promotes the polymerization of 2-aryl-1-methylenecyclopropanes without ring-opening. The reaction under ethylene atmosphere produces alternating copolymer of the two monomers to yield the polymers composed of the C4 repeating unit with a 1,1-cyclopropanediyl group. The alternating copolymer of ethylene and 7-methylenebicyclo[4.1.0]heptane undergoes thermal rearrangement to afford the polymer with CC double bond in main chain. A radical pathway is proposed. Dinuclear π-allylpalladium complexes with bridging Cl ligands initiate living polymerization of 2-alkoxy-1-methylenecyclopropanes, which accompanies ring-opening of the monomer, to afford the polymers composed of the C₃ repeating units having alkoxy and vinylidene groups. A cyclic dinuclear π-allylpalladium complex reacts with 2-alkoxy-1-methylenecyclopropane in the presence of pyridine to produce the living polymer with macrocyclic structures. Block copolymerization of the two monomers that contain OR or O(CH₂CH₂O)R as the substituents on the three-membered ring, results in the polymers with hydrophobic and hydrophilic segments.     

Geometry Dependence of Magnetization Reversal in Nanocomposite Alloys

The geometrical optimization of aligned hard-soft permanent-magnet nanocomposites is investigated by model calculations. Considered criteria are the shapes of the soft and c-axis-aligned hard phases, the packing fraction of the soft phase, and magnetostatic interactions. Taking into account that the energy product is enhanced via the volume fraction of the soft phase, subject to maintaining coercivity, we find that the best structures are soft-magnetic cubes as well as long rods with a square cross section. Comparing embedded soft cubes with embedded soft spheres of the same size, our nucleation-field analysis shows that the volume fraction of the soft phase is enhanced by 91%, with a coercivity reduction of only 25%. Magnetostatic interactions often but not always deteriorate the permanent-magnet performance, as exemplified by the example of MnBi:FeCo bilayers and multilayers.     

Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Mechanical properties of Al–Si–Cu alloys produced by the continuous casting process with heating process

The mechanical properties of aluminium alloys produced by the continuous cast process and heating process (heat-cast-sample) were investigated, where the aluminium alloys are heated continuously to high temperatures for 1 h immediately following heated mould continuous casting (HMC) and sand gravity casting (SGC). The material strength and ductility of the aluminium alloys were irregularly altered depending on the heating temperature. The mechanical properties decreased when the heating temperature increased to 400 °C and were then recovered when the temperature increased to 520 °C. However, these properties decreased again when heated to more than 540 °C. The mechanical properties of the HMC-heat-cast-sample showed overall higher than those for the SGC-sample. In addition to high tensile strength, high ductility was obtained for the HMC-520 °C samples compared with those for the as-cast-sample. Such changes were found to be directly attributable to the different severity of precipitate; moreover the crystal orientation was unchanged even after the heating process.     

Resolution of Epoxydienes by Reversed-Phase Chiral HPLC and its Application to Stereochemistry Assignment of Mulberry Looper Sex Pheromone

Resolution of insect pheromonal cis-epoxydiene racemates derived from (Z,Z,Z)-3,6,9-trienes was examined with a reversed-phase chiral HPLC column. The results showed that a Chiralcel OJ-R column was suitable for separating the enantiomers having a C₁₇–C₂₃ unsaturated straight chain except for 9,10-epoxydienes with a C₂₁–C₂₃ chain. To determine the absolute configuration of the separated enantiomers, each of the optically active epoxydienes was hydrogenated over Pd-BaSO₄ and its behavior was examined on this chiral column by cochromatography with the corresponding chiral epoxy compound having a saturated chain, which was prepared via a Sharpless epoxidation reaction. This analysis showed that the dextrorotatory C₁₇–C₂₃ 3,4- and 6,7-epoxydienes and C₁₇–C₂₀ 9,10-epoxydienes with shorter R _ts possess (3S,4R)-, (6S,7R)-, and (9R,10S) configurations, respectively, and the levorotatory enantiomers with longer R _ts possess the opposite configuration. An abdominal tip extract of the mulberry looper, Hemerophila artilineata Butler (Lepidoptera: Geometridae: Ennominae), included (9S,10R)-(Z,Z)-cis-9,10-epoxy-3,6-octadecadiene as a main sex pheromone component. The synthetic (9S,10R)-9,10-epoxydiene, rather than its antipode, elicited strong antennal and behavioral responses from the male moths in electrophysiological and field tests.     

Overexpression of HUT1 gene stimulates in vivo galactosylation by enhancing UDP-galactose transport activity in Saccharomyces cerevisiae

Transfer of activated sugar-nucleotides from the cytoplasm to the lumen of the Golgi is an essential requirement for glycosylation of glycoproteins, proteoglycans and glycosphingolipids. Although mannosylation is the major modification in the yeast Saccharomyces cerevisiae, several reports suggest the presence of galactose residues on yeast proteins and sphingolipids. We have detected alpha-galactosylated O-linked chitinase by lectin blotting from cells that functionally express the gma12(+) gene, encoding alpha 1,2-galactosyltransferase from Schizosaccharomyces pombe. This result implies the presence of a UDP-galactose transporter in S. cerevisiae. A conserved gene, HUT1, which encodes a putative multi-transmembrane protein, was cloned and characterized for its possible involvement in galactosylation. The HUT1 gene is not essential and is expressed at a relatively low level under the physiological conditions we examined. The disruption of this gene did not show any apparent impairments in glycosylation. However, a temperature- and concentration-dependent increase in UDP--galactose transport activity was detected from cells overexpressing HUT1 in the presence of gma12(+). The surface of these cells was confirmed to carry galactose residues by staining with FITC-conjugated alpha-galactose-specific lectin. These results suggest a role for Hut1p in the transport of UDP--galactose from the cytosol into the Golgi lumen in S. cerevisiae.     

Silver vanadium phosphorous oxide, Ag2VO2PO4: Chimie douce preparation and resulting lithium cell electrochemistry

Recently, we have shown silver vanadium phosphorous oxide (Ag₂VO₂PO₄, SVPO) to be a promising cathode material for lithium based batteries. Whereas the first reported preparation of SVPO employed an elevated pressure, hydrothermal approach, we report herein a novel ambient pressure synthesis method to prepare SVPO, where our chimie douce preparation is readily scalable and provides material with a smaller, more consistent particle size and higher surface area relative to SVPO prepared via the hydrothermal method. Lithium electrochemical cells utilizing SVPO cathodes made by our new process show improved power capability under constant current and pulse conditions over cells containing cathode from SVPO prepared via the hydrothermal method.     

A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.