Development of Millimeter Wave Fabry-Pérot Resonator for Simultaneous Electron-Spin and Nuclear Magnetic Resonance Measurement

We report a Fabry-Pérot resonator with spherical and flat mirrors to allow simultaneous electron-spin resonance (ESR) and nuclear magnetic resonance (NMR) measurements that could be used for double magnetic resonance (DoMR). In order to perform simultaneous ESR and NMR measurements, the flat mirror must reflect millimeter wavelength electromagnetic waves and the resonator must have a high Q value (Q?>?3000) for ESR frequencies, while the mirror must simultaneously let NMR frequencies pass through. This requirement can be achieved by exploiting the difference of skin depth for the two frequencies, since skin depth is inversely proportional to the square root of the frequency. In consideration of the skin depth, the optimum conditions for conducting ESR and NMR using a gold thin film are explored by examining the relation between the Q value and the film thickness. A flat mirror with a gold thin film was fabricated by sputtering gold on an epoxy plate. We also installed a Helmholtz radio frequency coil for NMR and tested the system both at room and low temperatures with an optimally thick gold film. As a result, signals were obtained at 0.18 K for ESR and at 1.3 K for NMR. A flat-mirrored resonator with a thin gold film surface is an effective way to locate NMR coils closer to the sample being examined with DoMR.     

Effects of the aluminum concentration on twin boundary motion in pre-strained magnesium alloys

We investigated the effects of Al concentration on the reciprocated motion of twin boundaries in pre-strained Mg-Al-Zn alloys through a combination of applied compression and tension,in-situ electron-backscattering diffraction observations,and high-angle annular dark-field scanning transmission electron microscopy observations.The twin growth was restricted by increased Al concentration,which resulted in the occurrence of smaller-sized twins.The reverse motion of twin boundaries was also restricted,resulting in the formation of higher fractions of secondary twins and 2-5° boundaries during reverse tension.The secondary twins and 2-5° boundaries mainly contributed to the increased ultimate tensile strength of the pre-strained Mg alloys.This effect is more significant in Mg alloys with larger pre-compression.Moreover,the increased amount of the Al solute atoms,rather than the precipitates,mainly contributed to the increased strengthening effect on the twin boundary motion.Our research contributes to development of high-strength Mg alloys by stabilizing twin boundaries.     

Long‐Lived Flexible Displays Employing Efficient and Stable Inverted Organic Light‐Emitting Diodes

Although organic light‐emitting diodes (OLEDs) are promising for use in applications such as in flexible displays, reports of long‐lived flexible OLED‐based devices are limited due to the poor environmental stability of OLEDs. Flexible substrates such as plastic allow ambient oxygen and moisture to permeate into devices, which degrades the alkali metals used for the electron‐injection layer in conventional OLEDs (cOLEDs). Here, the fabrication of a long‐lived flexible display is reported using efficient and stable inverted OLEDs (iOLEDs), in which electrons can be effectively injected without the use of alkali metals. The flexible display employing iOLEDs can emit light for over 1 year with simplified encapsulation, whereas a flexible display employing cOLEDs exhibits almost no luminescence after only 21 d with the same encapsulation. These results demonstrate the great potential of iOLEDs to replace cOLEDs employing alkali metals for use in a wide variety of flexible organic optoelectronic devices.     

A New Fluorogenic Probe for the Detection of endo‐β‐N‐Acetylglucosaminidase

We developed a fluorescence‐quenching‐based assay system to determine the hydrolysis activity of endo‐β‐N‐acetylglucosaminidases (ENGases). The pentasaccharide derivative 1 was labeled with an N‐methylanthraniloyl group as a reporter dye at the non‐reducing end and with a 2,4‐dinitrophenyl group as a quencher molecule at the reducing end. This derivative is hydrolyzed by ENGase, resulting in an increase in fluorescence intensity. Thus, the fluorescence signal is directly proportional to the amount of the tetrasaccharide derivative, hence allowing ENGase activity to be evaluated easily and quantitatively. Using this system, we succeeded in measuring the hydrolysis activities of ENGases and thus the inhibitory activities of known inhibitors. We confirmed that this assay system is suitable for high‐throughput screening for potential inhibitors of human ENGase that might serve as therapeutic agents for the treatment of N‐glycanase 1 (NGLY1) deficiency.     

Gas‐separation properties of amine‐crosslinked polyimide membranes modified by amine vapor

The modification of a polyimide (PI) membrane by aromatic amine vapor was performed in this work to increase the crosslinking of the membrane and to study the effect on gas permeability and the corresponding selectivity. The single‐gas permeability of the membranes at 35 °C was probed for H₂, O₂, N₂, CO₂, and CH₄. From the relationship between the combinations of gases and ideal permselectivities, this study showed that amine‐crosslinked PI membranes tended to increase gas permselectivities exponentially with the increasing difference in gas kinetic diameter. Moreover, this study illustrated that the permeability of the membranes was influenced by the formation rate of amine‐crosslinked networks or chemical structures after the reaction. The membranes had the highest level of permselectivities among crosslinked PI membranes for O₂/N₂, and the H₂/CH₄ permselectivity increased 26 times after vapor modification. Furthermore, the modification method that used aromatic amine vapor produced thin and strongly modified layers. These findings indicate that modification is an advantageous technique for improving gas‐separation performance, even considering thinning. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44569.     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Plasma Confinement Characteristics in Heliotron J--Spontaneous Change of Plasma Confinement State

Spontaneous transition of the plasma confinement mode was observed in the helicalaxis heliotron device “Heliotron J“ for three different plasma heating schemes, i.e. ECHonly, NBI-only and the combination of ECH and NBI. The transition seems to occur above a certain critical density. In addition to the confinement transition, a spontaneous shift of the hitting position of the divertor plasma flux on the wall was observed. This shift could be related with the change of the edge field topology caused by non-inductive toroidal currents.     

Theoretical study on controllability of quantum state energy in an InGaAs/GaAs quantum dot buried in InGaAs

We theoretically studied the relationship between quantum energy states and structural parameters of an InGaAs/GaAs quantum dot (QD) buried in strained InGaAs, emitting at 1.1 to 1.4 em. The crystal distortion of the buried QD structure in three dimensions was computed based on the three-dimensional finite element method. Under the computed strain fields, the Schr?dinger equation was solved to obtain wavefunctions and eigenenergies. By calculating the dependence on structural parameters, we investigated the controllable range of the ground state energy and the energy separation between the ground state and the first excited state. We found that the energy separation exhibited a maximum value as a function of QD composition, enabling us to identify the composition of the QD structure. The effects of the burying layer composition and QD diameter were also investigated to expand the controllable range of the state energy. We also showed that the wavefunction symmetry was improved by burying the QD in the InGaAs layer. Our results will be useful in developing advanced devices for optical telecommunications and quantum information technology.