Carbon-coated iron oxide nanoparticles as contrast agents in magnetic resonance imaging

Coprecipitated ferrite nanoparticles were coated with carbon using a hydrothermal method. From transmission electron microscope pictures, we could see that the coated iron oxide nanoparticles were spherical in shape with an average diameter of 90 nm. The strong bonding of carbon on the nanoparticle surfaces was checked by noting the C = O and C = C vibrations in Fourier transform infrared spectra. The spin-lattice relaxation process [T ₁] and spin-spin relaxation process [T ₂] relaxivities of hydrogen protons in the aqueous solution of coated nanoparticles were determined to be 1.139 (mM·s)^-1 and 1.115 (mM·s)^-1, respectively. These results showed that the carbon-coated iron oxide nanoparticles are applicable as both T ₁ and T ₂ contrast agents in magnetic resonance imaging.     

Contact-induced Damage in Ceramic Coatings on Compliant Substrates: Fracture Mechanics and Design

Simple explicit relations are presented for the onset of competing fracture modes in ceramic coatings on compliant substrates from Hertzian-like contacts. Special attention is given to a deleterious mode of radial cracking that initiates at the lower coating surface beneath the contact, in addition to traditional cone cracking and quasiplasticity in the near-contact area. The critical load relations are expressed in terms of well-documented material parameters (elastic modulus, toughness, hardness, and strength) and geometrical parameters (coating thickness and sphere radius). Data from selected glass, Al₂O₃ and ZrO₂ coating materials on polycarbonate substrates are used to demonstrate the validity of the relations. The formulation provides a basis for designing ceramic coatings with optimum damage resistance.     

Enzymatic synthesis of low-calorie structured lipids in a solvent-free system

For the synthesis of low-calorie structured lipids (LCSL), transesterification between triacetin and stearic acid using immobilized lipase in a solvent-free system was investigated. Stearic acid, a long-chain saturated fatty acid, was incorporated mainly into the sn-1 and/or sn-3 positions of triacetin by lipase-catalyzed reaction. Three types of reactor systems (open, closed, and vacuum) were studied for the production of LCSL. The effects of various reaction variables such as water activity of substrates and lipase, molar ratio of substrates, stirring speed and reaction temperature were investigated. In the vacuum reactor system, a certain amount of water was added periodically to maintain the optimal water content of the reaction system. When a suitable amount of water (0.65 wt% of substrates) was added at every 1 h into the vacuum reactor system, more than 88% LCSL was obtained within 4 h using Chirazyme^® L-2.     

Anti-inflammatory effects of silkworm hemolymph on lipopolysaccharide-stimulated macrophages

Macrophages participate in several inflammatory pathologies such as sepsis and arthritis. We investigated the effect of silkworm hemolymph (SH) on the LPS-induced pro-inflammatory macrophages. SH inhibits LPS-induced nitric oxide (NO) production in RAW 264.7 cells and murine peritoneal macrophages. The decreased NO was reflected as a decreased amount of inducible nitric oxide synthase (iNOS) mRNA and protein. It was also found that SH inhibited pro-inflammatory cytokines, IL-1β, IL-6, and TNF-α production. To elucidate the mechanism by which SH inhibits NO production and iNOS expression, we investigated that SH suppressed IκB phosphorylation, which leads to the activation of NF-κB followed by degradation of IκB. This observation suggests that SH is a potential therapeutic modulator for inflammation-associated disorders.     

Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological properties

The rheology and morphology of four sets of binary blends of polyethylene synthesized with metallocene catalysis (metallocene polyethylene: MCPE) with polyolefins prepared using Ziegler‐Natta catalysts have been investigated. The blend systems are MCPE with high density polyethylene (MCPE‐HDPE), polypropylene (MCPE‐PP), poly(propylene‐co‐ethylene) (MCPE‐CoPP), and poly(propylene‐co‐ethylene‐co‐1‐butylene) (MCPE‐TerPP). Cole‐Cole plots [storage melt viscosity (η′) versus loss melt viscosity (η″)], plots of the dynamic storage modulus (G′) versus the dynamic loss modulus (G″), and plots of the log melt viscosity (η*, η′, and η″) versus blend compositions were constructed. The morphology of the blends after microtoming and etching was studied. The phase morphology of MCPE‐HDPE appeared homogeneous, whereas the other three blends were heterogeneous. Rheological and morphological investigations indicated that the MCPE‐HDPE blend was miscible, but the other three blends were immiscible in the melt as well as in the solid state. These observations can be rationalized in terms of the similarity of the chemical structures of the polyolefins.     

Optimization-based predictive control of a simulated moving bed process using an identified model

For optimization-based dynamic control of simulated moving bed (SMB) process, a novel control strategy based on process identification, which is an extension of the earlier work (Song et al., 2006a. Identification and predictive control of a simulated moving bed process: purity control. Chemical Engineering Science 61, 1973-1986), is proposed. A linear output prediction model is obtained by the method of subspace identification and used for the dynamic control. The controller is designed for optimizing the production cost while maintaining the specified product purities. For all of these, the average purities over one switching period of the target components in extract and raffinate streams, the reciprocal productivity and the solvent consumption are selected as output variables, while the flow rates in 1, 2, 3 and 4 are chosen as the manipulated variables. The realization of this concept is discussed and assessed on a virtual eight column SMB unit for a system following a bi-Langmuir isotherm. The identified prediction model is proven to be in good agreement with the first principles model considered as the actual SMB process. For typical control objectives encountered in actual operation, i.e., disturbance rejection and set-point tracking, it is shown that the proposed controller exhibits excellent performance, hence it is an effective tool for optimization-based control of SMB process.     

High temperature wear of semimetallic disc brake pads

The wear of friction materials as measured by isothermal techniques remains insensitive to temperature to about 230°C (drum) and increases exponentially at higher temperatures. The high temperature wear of organic friction materials was found to be related to the thermal decomposition of the organic ingredients with an activation energy of 4–10 kcal mol^?1. The results indicate that high temperature wear of semimetallic friction materials is controlled by thermal degradation of organic ingredients as it is for organic friction materials.     

Threshold voltage instability characteristics of HfO2 dielectrics n-MOSFETs

In this paper, the threshold voltage instability characteristics of HfO₂ high-k dielectric are discussed. The results from various stress bias conditions including DC and AC with variations of frequency, duty cycle, and polarity provide additional insights into the intrinsic behavior and the trapping dynamics of high-k materials. A reduced threshold voltage shift was observed at higher frequency and lower duty cycle under AC positive unipolar stress compared to DC stress. Similarly, the degradation of maximum transconductance was also reduced with AC stress. However, subthreshold swing changes were found to be negligible and fairly independent of stress frequencies and duty cycles under AC positive unipolar stress.When different polarity of stress, such as positive, negative, and bipolar stress was applied, it was observed that frequency and duty cycle dependencies were still valid in all three conditions. In contrast to positive stress, negative stress showed a decrease in the threshold voltage shift. Bipolar stress resulted in the highest threshold voltage instability, but the degradation in transconductance and subthreshold swing was actually smaller than those in negative unipolar stress. The bulk trap of HfO₂ dielectric, which is proportional to its physical thickness, is believed to be the primary factor for threshold voltage shift. AC unipolar operation would allow a higher 10-year lifetime operating voltage than the DC condition. In addition to experimental results, a plausible mechanism has been proposed.     

Effect of grain size and density of spray-pyrolyzed hydroxyapatite particles on the sinterability of hydroxyapatite disk

The effect of grain size and density of hydroxyapatite particles, which were prepared by different spray-pyrolysis temperatures, on the sinterability of hydroxyapatite disk was investigated. Calcium phosphate solution (Ca/P ratio of 1.67 and 0.1 M concentration) was prepared by reacting calcium nitrate tetrahydrate and diammonium hydrogen phosphate solutions, and adding nitric acid. Spray-pyrolysis was carried out at 900 °C, 1200 °C, and 1500 °C at a carrier gas flowing rate of 10 L/min. The particles synthesized at 900 °C were large, hollow spheres with a hole at the outer surface, a broad size distribution, but had small grain sizes. Conversely, the particles synthesized at 1500 °C were small, solid spheres with a narrow size distribution, but had large grain sizes. The particles synthesized at 1200 °C had intermediate properties. A sinterability test conducted at 1100 °C for 1 h demonstrated that small and dense particles with large grain sizes showed a higher relative sintered density compared with large and hollow particles with small grain sizes. The results were explained in terms of the grain size and density of a particle, which were inversely and proportionally affected to sinterability. The practical implication of these results is that highly sinterable hydroxyapatite powders can be synthesized through spray-pyrolysis at a high temperature under a fixed initial concentration of calcium phosphate solution and flow rate of carrier gas.