Analysis of large-signal dynamic characteristics of 10-Gb/s tunable distributed Bragg reflector lasers integrated with electroabsorption modulator and semiconductor optical amplifier based on the time-dependent transfer matrix method

We investigate large-signal dynamic characteristics of tunable distributed Bragg reflector (DBR) lasers with different structures. Because of high chirp and complex structures of tunable DBR lasers, it is difficult to accurately analyze large signal chirp and output pulse shapes with analytical models. Therefore, we apply a numerical model based on the time-dependent transfer matrix method to tunable DBR lasers integrated with electroabsorption modulator (EAM) and semiconductor optical amplifier (SOA). Using this model, we find a suitable /spl alpha/-parameter range in the Bragg grating section (/spl alpha//sub Bragg/-parameter) that produces the tolerable wavelength chirp while maintaining a proper tuning range. To employ the tunable lasers in wavelength division multiplexed networks and improve flexibility of the networks, the tunable lasers should have high output power and low wavelength chirp. According to our simulation results, the EAM section had better be located in between SOA and DBR laser sections to obtain high output power and low wavelength chirp.     

470-MHz–698-MHz IEEE 802.15.4m Compliant RF CMOS Transceiver

This paper proposes an IEEE 802.15.4m compliant TV white-space orthogonal frequency-division multiplexing (TVWS)-(OFDM) radio frequency (RF) transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS-OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty-cycle local oscillator generator, and a delta-sigma fractional-N phase-locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high-Q filtering RF receiver is tolerable to in-band interferers as strong as −20 dBm at a 3-MHz offset. The proposed TVWS-OFDM RF transceiver is fabricated using a 0.13-μm CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error-vector-magnitude of < 3%, and a sensitivity level of −103 dBm with a packet-error-rate of < 3%. Using the implemented TVWS-OFDM modules, a public demonstration of electricity metering was successfully carried out.     

Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics

Most commercial copper nanoparticles are covered with an oxide shell and cannot be sintered into conducting lines/films by conventional thermal sintering. To address this issue, past efforts have utilized complex reduction schemes and sophisticated chambers to prevent oxidation, thereby rendering the process cost ineffective. To alleviate these problems, we demonstrate a reactive sintering process using intense pulsed light (IPL) in the present study. The IPL process successfully removed the oxide shells of copper nanoparticles, leaving a conductive, pure copper film in a short period of time (2 ms) under ambient conditions. The in situ copper oxide reduction mechanism was studied using several different experiments and analyses. We observed instant copper oxide reduction and sintering through poly(N-vinylpyrrolidone) functionalization of copper nanoparticles, followed by IPL irradiation. This phenomenon may be explained by oxide reduction either via an intermediate acid created by ultraviolet (UV) light irradiation or by hydroxyl (-OH) end groups, which act like long-chain alcohol reductants.     

Thin-Film Thermoelectric Module for Power Generator Applications Using a Screen-Printing Method

A new process for fabricating a low-cost thermoelectric module using a screen-printing method has been developed. Thermoelectric properties of screen-printed ZnSb films were investigated in an effort to develop a thermoelectric module with low cost per watt. The screen-printed Zn _x Sb_1−x films showed a low carrier concentration and high Seebeck coefficient when x was in the range of 0.5 to 0.57 and the annealing temperature was kept below 550°C. When the annealing temperature was higher than 550°C, the carrier concentration of the Zn _x Sb_1−x films reached that of a metal, leading to a decrease of the Seebeck coefficient. In the present experiment, the optimized carrier concentration of screen-printed ZnSb was 7 × 10¹⁸/cm³. The output voltage and power density of the ZnSb film were 10 mV and 0.17 mW/cm², respectively, at ΔT = 50 K. A thermoelectric module was produced using the proposed screen-printing approach with ZnSb and CoSb₃ as p-type and n-type thermoelectric materials, respectively, and copper as the pad metal.     

Integrated circuit design for physical unclonable function using differential amplifiers

A physical unclonable function (PUF) based on process variations on silicon wafers is a very promising technology which finds various applications in identification and authentication, but only a few integrated circuits have been reported so far. As those circuits are vulnerable to power supply noises, switching noises and environmental variations, they lead to a reliability issue such as time-varying or metastable responses. To resolve this issue, this letter proposes a new integrated circuit design for PUFs using differential amplifiers. The feasibility of the proposed circuit has been theoretically analyzed and validated through HSPICE simulations for the previous and proposed circuits.     

Spectrum‐Based Color Reproduction Algorithm for Makeup Simulation of 3D Facial Avatar

Various simulation applications for hair, clothing, and makeup of a 3D avatar can provide more useful information to users before they select a hairstyle, clothes, or cosmetics. To enhance their reality, the shapes, textures, and colors of the avatars should be similar to those found in the real world. For a more realistic 3D avatar color reproduction, this paper proposes a spectrum‐based color reproduction algorithm and color management process with respect to the implementation of the algorithm. First, a makeup color reproduction model is estimated by analyzing the measured spectral reflectance of the skin samples before and after applying the makeup. To implement the model for a makeup simulation system, the color management process controls all color information of the 3D facial avatar during the 3D scanning, modeling, and rendering stages. During 3D scanning with a multicamera system, spectrum‐based camera calibration and characterization are performed to estimate the spectrum data. During the virtual makeup process, the spectrum data of the 3D facial avatar is modified based on the makeup color reproduction model. Finally, during 3D rendering, the estimated spectrum is converted into RGB data through gamut mapping and display characterization.     

A dead-time minimization algorithm for improving the output characteristics of the PWM inverter

The dead time in an inverter is necessary to prevent the short circuit of the DC source. However, the dead time may cause serious problems such as waveform distortion, voltage drop, increased torque ripple and heating of the motors. In this paper, a dead-time minimization algorithm is proposed for improving the inverter output performance. The adverse effects of the dead time are investigated, focusing on the voltage drop and the distortion factor of inverter output current. The proposed algorithm consists of forbidding unnecessary triggers for the inverter switches that are not turned on although the gate drive signal is impressed. The proposed algorithm is explained in terms of the conduction modes of the output currents. The validity of the proposed method is verified by comparing the simulated and experimental results with those of the conventional methods. It is concluded from the results that the proposed algorithm can reduce the output current harmonics. Further, the output voltage can be equal to the reference value and the number of inverter switchings can also be reduced to 50% compared with those of conventional methods.     

New single-stage low dc bus voltage stress converter for universal line applications

A new single-stage power factor corrected ac–dc converter for universal line applications is proposed in this paper. This converter has a buck topology as a power factor corrector. The dc bus voltage of the proposed converter is always lower than the peak input voltage at any load condition. Therefore, the problem of high dc bus voltage under the light load condition for the single-stage converter is solved, especially in the case of universal line applications. The design equations are presented for the proposed converter and a design example for a 5V 12A application is presented. The theoretical analysis and experimental results show that the dc bus voltage can be limited within 260V and the line input current harmonics can meet IEC 61000-3-2 Class D requirements at any load conditions for the line input voltages from 90 to 260V_ac.     

Potential interference and rain attenuation at 21.4–22 GHz downlink broadcasting satellite signals

World Radio Conference WRC-1992 has allocated the frequency band 21.4–22.0?GHz to regions 1 and 3 to be utilised to carry direct broadcasting satellite (DBS) services. This high-frequency band is more susceptible to rain attenuation, leading to degradation of the signal quality. Moreover, this frequency band is assigned to two different services, i.e. satellite broadcasting and fixed mobile services at the same regions; hence, the impact of intersystem interference in a depredated signal is a critical issue in the DBS receiver. In this study, the effects of rain attenuation on the DBS downlink signals as well as the impact of the potential interference on the reception quality will be estimated. An interference scenario will be introduced to investigate the system performance in both propagation mechanisms of clear-sky and rain conditions.     

Advanced Functional Structure‐Based Sensing and Imaging Strategies for Cancer Detection: Possibilities,Opportunities, Challenges,and Prospects

Cancer is the second most common cause of death in the world. The principal limitations thus far encountered in the clinical practice of probing cancer are diverse and include low sensitivity, time consumption, bulkiness, and cost. In this respect, nanomaterial (NM)‐based sensing techniques are recognized as a superior alternative to efficiently resolve such limitations. A better understanding of NM‐based sensing platforms is thus important so that these novel avenues can easily be explored for clinical applications. These platforms have the merits of high sensitivity, high specificity, rapid response, and easy‐to‐read signals. This review offers a comprehensive survey of NM‐based advanced cancer‐sensing techniques and will help the scientific community establish optimum sensing strategies based on an accurate assessment of the interactions between cancer biomarkers and NM‐based platforms.