Application of titanium machining chips in welding consumables for wear-resistant hardfacing

Equipment of sugar cane plants and mineral extraction are submitted to severe abrasive wear conditions. Welded hardfacings are usually applied to repair this kind of damage, where commercial chromium/carbon-rich welding consumables have usually been employed. In the present work we investigated the microstructure of experimental hardfacings made by addition of residues (chips) collected from the machining of ASTM F67 (unalloyed Ti, grade 4) alloy. Mixtures with different carbide-formers (Cr/Nb ferro-alloys) were also tested. Two layers of ‘pure’ chips (Ti), chips plus Fe–Cr (Ti–Cr), and chips plus Fe–Nb (Ti–Nb) were applied on low-carbon steel specimens by the GTAW/TIG process. The microstructure of hardfacing layers was observed by optical and scanning electron microscopy (SEM) equipped with EDS microanalysis. The microstructural characterization has determined that carbide distributions change significantly with the chemical nature of the hardfacing. SEM observations coupled with EDS microanalysis have confirmed the formation of complex carbides within the metal weld, whose stoichiometry was determined by X-ray diffraction (XRD) analysis. Mixed carbides of MC type and some cementite have been found. As a result it was suggested that use of ASTM F67 chips as carbide formers for composition of welding consumables can contribute to improved wear resistance of hardfacings, if compared with traditional chromium-based hardfacings.     

Experimental and numerical study on hydrodynamics of riparian vegetation

Recently, many channelized rivers tend to be heavily vegetated due to regime shifts in hydrological, fluvial and ecological processes. Dense vegetation in a river frequently obstructs a flood flow and reduces conveyance capacity of channels. On the other hand, river vegetation provides various ecological services such as habitats for various species and life, natural cycle of organic and inorganic substances, etc.. It is of engineering importance to understand vegetation hydrodynamics in order to preserve vegetation nature and keep a certain level of flow conveyance capacity. In view that willows tend to be densely vegetated along the shoreline of floodplains or sandbars, a field measurement, a physical model experiment and a numerical analysis were carried out for investigating hydrodynamics in an open channel with riparian vegetation. Discussion was made focusing on flow and shear layer structures developed around the vegetation canopy.     

Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. V. Cellulose/polystyrene blends

Homogeneous grafting of styrene onto cellulose was carried out in a dimethylacetamide/lithium chloride solvent system. The grafted products were added to cellulose/polystyrene (PS) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends decreased with an increase in grafted product content. The crystallinity of the blends decreased with grafted product content. The microphase‐separated structures of the blends became finer with grafted product content. The glass transition temperatures for cellulose and PS in the blends were lowered with grafted product content. Differences in thermal decomposition behavior of the blends were correlated with compatibility. Thermogravimetry was effective for compatibility estimation in cellulose/PS blends containing grafted products. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Design on semiconductor coupled SAW convolver

This paper presents results of a design study on a semiconductor coupled surface acoustic wave (SAW) convolver in which bi-directionally propagating SAWs, on a piezoelectric substrate with a high coupling coefficient, couple with bonded semiconductor diodes through multistrips. To obtain convolution signals with a high efficiency, we adopted a diode-balanced bridge structure for the nonlinear operation. We also found that the tapping pitches of the multi-strip electrodes have robustness against operation frequency variation and temperature-dependent variation on the delay of the SAW. We verified the effectiveness of the device in. a circuit simulation and an experiment on a test circuit, which was fabricated by using an epitaxial lift-off film-bonding process.     

Acoustic surface-wave filters without apodisation loss with electrodes with inclined apodisation

The letter reports a new apodisation of electrodes which provides surface-acoustic-wave filters capable of operation without apodisation loss and with sufficiently large stopband attenuation. The effectiveness of the apodisation was shown by experiments.     

Phonon emission from a discrete sine-Gordon breather

Phonon emission from a large-amplitude discrete sine-Gordon breather was studied numerically for a small degree of discreteness. In contrast to the case of highly discrete system investigated by Boesch and Peyrard (Phys. Rev. B 43 (1991) 8491), it was found that the resonance between the breather's oscillation and the phonons of the lower phonon band edge (κ=0) takes place for a small degree of discreteness.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Synthesis and characterization of fluorene-carbazole and fluorene-phenothiazine copolymers with carbazole and oxadiazole pendants for organic light emitting diodes

We report the synthesis and characterization of new series of the fluorene based polymers with carbazole and oxadiazole pendants for the generation of the white emission out of the EL device. In the fluorene backbone, hole transporting units such as carbazole or phenothiazine were incorporated to improve the EL brightness and efficiency. The PFCzOxd-co-PCzs and PFCzOxd-co-PPTZs in EL spectra showed maximum peaks at around 430 nm and additional large peaks at around 530 and 500 nm, respectively. In case of PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz, the EL spectra of the polymers showed two distinct peaks comprising the maximum at 427 nm, which corresponds to the EL spectra of the conjugated backbone, and additional broad peaks at around 540 and 530 nm, respectively. The CIE coordinates of the devices from PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz were (0.28, 0.33) and (0.25, 0.32), respectively, approaching the value of the standard white of National Television System Committee (NTSC) (0.33, 0.33).     

Structural estimation of particle arrays at air–water interface based on silica particles with well‐defined and highly grafted poly(methyl methacrylate)

Silica nanoparticles with well‐defined, highly grafted dense poly(methyl methacrylate) (MMA) were prepared by surface‐initiated activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) of methyl methacrylate with an initiator‐fixed silica particle in the presence of air. Two different polymerizations of MMA were carried out under the same conditions using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) and N,N,N′,N′,N″‐pentamethyldiethylene‐triamine (PMDETA) as the ligand, respectively. In the CuCl₂/PMDETA system, polymerization appeared to be more controlled with a lower polydisperisty compared with the CuCl₂/Me₆TREN system. The monolayer of these particles was formed at the air–water interface using Langmuir‐Blodgett (LB) technique. Multilayers of the particles were fabricated by repetition of LB depositing. A surface pressure–area (π–A) measurement and SEM observation were used to characterize the particle arrays. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers