产量递减规律的诊断方法

传统的Arps产量递减分析方法要求事先选定递减规律的初始时间、初始产量及初始递减率,事实上这些参数是很难确定的。实际应用时不得不人为地加以臆断而使得此方法带有不确定性.为此提出了产量递减规律的诊断方法。应用诊断曲线很容易确定递减规律的模型参数,克服常规方法的不足。通过选用参考时间、参考产量和参考递减率,使得递减分析方法具有一定的灵活性和优越性、该方法简便、实用。     

Diurnal thermal cycling effects on microwave signatures of thin seaice

To investigate effects of diurnal thermal cycles on C-band polarimetric backscatter and millimeter-wave emission from sea ice, the authors carried out a winter experiment at the outdoor geophysical research facility (GRF) in the cold regions research and engineering laboratory (CRREL), the ice sheet grew from open sea water to a thickness of 10 cm in 2.5 days, during which they took polarimetric backscatter data with a C-band scatterometer, interlaced with brightness temperature measurements at 90 GHz in conjunction with meteorological and sea ice characterizations. The initial ice growth in the late morning was slow due to high insolation. As the air temperature dropped during the night, the growth rate increased significantly. Air temperature changed drastically from about -12 to -36°C between day and night, the diurnal thermal cycle repeated itself the next day and the growth rate varied in the same manner. Ice temperature profiles clearly show the diurnal response in the ice sheet with a lag of 2.5 h behind the time of the maximum short-wave incident solar radiation. The diurnal cycles are also evident in the millimeter-wave brightness temperature data, measured sea ice backscatter revealed substantial diurnal variations up to 6 dB with repeatable cycles in synchronization with the temperature cycles and the brightness temperature modulations, the diurnal cycles in backscatter indicate that the dominant scattering mechanism related to thermodynamic processes in sea ice is reversible, a diurnal backscatter model based on sea ice electrodynamics and thermodynamics explains the observed diurnal signature. This work shows that diurnal effects are important for inversion algorithms to retrieve sea ice geophysical parameters from remote sensing data acquired with a satellite synthetic aperture radar (SAR) or scatterometer on Sun-synchronous orbits     

Chances of cure are not compromised with sphincter-saving procedures for cancer of the lower third of the rectum

BACKGROUND: The goal of this study was to compare patterns of recurrence and long-term outcome after sphincter-saving procedures (SSPs) and abdominoperineal resection (APR) in patients with tumors located in the lower third of the rectum. METHODS: We reviewed the charts of 1001 patients operated on for primary rectal adenocarcinoma between 1980 and 1991. All patients with tumors located between 5 and 7 cm from the anal verge and treated with curative intent were included. RESULTS: Of the 261 patients who met our criteria, 162 had undergone SSP and 99 had undergone APR. The local recurrence rates for SSP and APR were 8% and 11%, respectively (p = 0.41), and the distant metastases rates were 23% and 28%, respectively (p = 0.35). Recurrence and distant metastases rates for SSP and APR, respectively, did not differ by TNM classification: state I, 10% versus 9% (p = 0.9); stage II, 25% versus 43% (p = 0.13); and stage III, 56% versus 57% (p = 0.92). Five-year disease-free survival rates for SSP and APR patients were 70.5% and 62.3%, respectively (p = 0.2). CONCLUSIONS: Tumors in the lower third of the rectum can be treated with sphincter-saving procedures without compromising the chance of cure.     

基于空间矩的灰度边缘亚像元度量精度分析

灰度图像中边缘定位受采样密度限制，亚像元精度度量方法在需要高精度的应用中受到重视，要想知识到底需要多高的分辨率才能达到定精度指标，就有必要分析特征定位方法的最坏情况的精度，文中用分析和实验的方法给出了基于空间矩的边缘定位方法，对于边缘点，边缘直线以及直边缘区域的最坏情况定位精度分析。分析和讨论的结果不但可以用来确定已知形状位置估计的最大误差，而且还可用于对准的形状几何参数，以获得较高的精度。     

广义频率响应函数的鲁棒建模新方法

针对基于非线性谱分析的故障诊断技术的需要,研究了非线性系统的广义频率响应函数的鲁棒在线建模方 法。首先将次元分析算法应用于Volterra级数模型的辨识,并通过对此算法的修正,得到了一种改进的Volterra系统的鲁 棒辨识算法。对其鲁棒性能进行的分析表明,改进算法的鲁棒抗噪性能被明显提高。在此基础上,提出了一种广义频率响 应函数的两步鲁棒建模新方法。仿真实验表明,该方法具有良好的鲁棒收敛性能,能够有效解决GFRF的在线建模问题。     

Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

广东省大型工程建设中天然放射性核素引起的环境问题

本文介绍了广东省境内几个大型基本建设工程项目中天然放射性核素引起的环境问题及有关治理对策，并就今后类似建设项目的辐射环境保护工作提出了建议。     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Current distribution, resistance, and inductance forsuperconducting strip transmission lines

A method for the calculation of the current distribution, resistance, and inductance matrices for a system of coupled superconducting transmission lines having finite rectangular cross-section is presented. These calculations allow accurate characterization of both high-T_c and low-T _c superconducting strip transmission lines. For a single stripline geometry with finite ground planes, the current distribution, resistance, inductance, and kinetic inductance are calculated as functions of the penetration depth for various film thicknesses. These calculations are then used to determine the penetration depth for Nb, NbN, and YBa₂Cu₃O_7-x superconducting thin films from the measured temperature dependence of the resonant frequency of a stripline resonator. The calculations are also used to convert measured temperature dependence of the quality factor to the intrinsic surface resistance as a function of temperature for an Nb stripline resonator