Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

3D measures exploitation for a monocular semi-supervised fall detection system

Falls have been reported as the leading cause of injury-related visits to emergency departments and the primary etiology of accidental deaths in elderly. Thus, the development of robust home surveillance systems is of great importance. In this article, such a system is presented, which tries to address the fall detection problem through visual cues. The proposed methodology utilizes a fast, real-time background subtraction algorithm, based on motion information in the scene and pixels intensity, capable to operate properly in dynamically changing visual conditions, in order to detect the foreground object. At the same time, it exploits 3D space’s measures, through automatic camera calibration, to increase the robustness of fall detection algorithm which is based on semi-supervised learning approach. The above system uses a single monocular camera and is characterized by minimal computational cost and memory requirements that make it suitable for real-time large scale implementations.     

User Interface Design Principles for Interactive Television Applications

Interactive Television (ITV) applications gratify entertainment needs and leisure activities in a relaxed domestic context. Then, the mentality of efficiency and task completion implied by many user interface heuristics may not be suitable for design and expert evaluation of ITV. In line with the contemporary movement towards the design of the user experience of computing systems, a set of design principles for ITV applications has been developed. Instead of information technology, the field of communication science was explored, which has accumulated an extensive theory of TV usage and viewer behavior. For the empirical validation, the principles were employed in the design of an interactive music TV application. The results suggest that a small set of generic principles could support the systematic design of ITV applications and produce a design rationale that is traceable and comparable to alternative solutions, during the process of early product development. In addition, the principles could be refined into specific guidelines and further employed to support expert evaluation techniques.     

Attacking smart card systems: Theory and practice

Smart card technology has evolved over the last few years following notable improvements in the underlying hardware and software platforms. Advanced smart card microprocessors, along with robust smart card operating systems and platforms, contribute towards a broader acceptance of the technology. These improvements have eliminated some of the traditional smart card security concerns. However, researchers and hackers are constantly looking for new issues and vulnerabilities. In this article we provide a brief overview of the main smart card attack categories and their corresponding countermeasures. We also provide examples of well-documented attacks on systems that use smart card technology (e.g. satellite TV, EMV, proximity identification) in an attempt to highlight the importance of the security of the overall system rather than just the smart card.     

Transport ticketing security and fraud controls

For many years, public transportation systems have been an essential part of day-to-day life and so the principle of needing a “ticket” has been familiar to generations of travellers. However as technology has advanced it has become possible to make use of electronic tickets that have significant advantages both for travellers and for the transport system operators. There has been a lot of recent publicity regarding weaknesses in some electronic ticket solutions; which whilst based on some solid facts tend to suggest that transport ticket security and fraud control is primarily a smart card/RFID technology issue. However this cannot be the case as systems exist that do not use such technology; or use it along side legacy systems. This paper will consider technology problems, but will first establish the bigger picture of transport ticketing and will finally make suggestions for future evolution of such systems.     

Interactive mixed reality white cane simulation for the training of the blind and the visually impaired

This paper presents a mixed reality tool developed for the training of the visually impaired based on haptic and auditory feedback. The proposed approach focuses on the development of a highly interactive and extensible Haptic Mixed Reality training system that allows visually impaired to navigate into real size Virtual Reality environments. The system is based on the use of the CyberGrasp™ haptic device. An efficient collision detection algorithm based on superquadrics is also integrated into the system so as to allow real time collision detection in complex environments. A set of evaluation tests is designed in order to identify the importance of haptic, auditory and multimodal feedback and to compare the MR cane against the existing Virtual Reality cane simulation system.     

Smart Workplaces for older adults: coping ‘ethically’ with technology pervasiveness

Universal Access in the Information Society - Pervasive technologies such as Artificial Intelligence, Virtual Reality and the Internet of Things, despite their great potential for improved...     

Bond of steel reinforcement with microwave cured concrete repair mortars

This paper investigates the effect of microwave curing on the bond strength of steel reinforcement in concrete repair. Pull-out tests on plain mild steel reinforcement bars embedded in four repair materials in 100 mm cube specimens were performed to determine the interfacial bond strength. The porosity and pore structure of the matrix at the steel interface, which influence the bond strength, were also determined. Test results show that microwave curing significantly reduces the bond strength of plain steel reinforcement. The reduction relative to normally cured (20 °C, 60% RH) specimens is between 21 and 40% with low density repair materials and about 10% for normal density cementitious mortars. The corresponding compressive strength of the matrix also recorded similar reduction and microwave curing resulted in increased porosity at the interface transition zone of the steel reinforcement. A unique relationship exists between bond strength and both compressive strength and porosity of all matrix materials. Microwave curing reduced shrinkage but despite the wide variation in the shrinkage of the repair mortars, its effect on the bond strength was small. The paper provides clear correlations between the three parameters (compressive strength, bond strength and porosity), which are common to both the microwave and conventionally cured mortars. Therefore, bond-compressive strength relationships used in the design of reinforced concrete structures will be also valid for microwave cured elements.     

A well‐conditioned and optimally convergent XFEM for 3D linear elastic fracture

A variation of the extended finite element method for three‐dimensional fracture mechanics is proposed. It utilizes a novel form of enrichment and point‐wise and integral matching of displacements of the standard and enriched elements in order to achieve higher accuracy, optimal convergence rates, and improved conditioning for two‐dimensional and three‐dimensional crack problems. A bespoke benchmark problem is introduced to determine the method's accuracy in the general three‐dimensional case where it is demonstrated that the proposed approach improves the accuracy and reduces the number of iterations required for the iterative solution of the resulting system of equations by 40% for moderately refined meshes and topological enrichment. Moreover, when a fixed enrichment volume is used, the number of iterations required grows at a rate which is reduced by a factor of 2 compared with standard extended finite element method, diminishing the number of iterations by almost one order of magnitude. Copyright © 2015 John Wiley & Sons, Ltd.