Characteristics of hydrogen-assisted intergranular fatigue crack growth in interstitial-free steel: role of plastic strain localization

The behavior of intergranular fatigue crack growth in an interstitial-free (IF) steel in a hydrogen environment was investigated at different frequencies. Focusing on the plastic strain localization, we observed details of the striation-like feature on the intergranular fracture surface, slip behavior around microvoids, and crystallographic orientation gradient underneath the fracture surface. It was determined that the intergranular fatigue crack growth mechanism in the IF steel is microvoid formation at the crack tip and subsequent coalescence with the crack. Moreover, it was found that the grain boundaries, acting as propagation paths, suffer from pre-damage arising from plastic strain localization near the grain boundaries even before the main crack propagates to a certain location. Therefore, fatigue cracks in a hydrogen environment easily propagate to the grain boundaries. The frequency dependence of fatigue crack growth in the hydrogen environment is significantly smaller than that in a low carbon steel, probably because of the frequency dependence of the pre-damage evolution behavior.     

The temperature dependence of luminescence from a long-lasting phosphor exposed to ionizing radiation

The temperature dependence of luminescence from a long-lasting phosphor (LLP), SrAl₂O₄ : Eu²⁺,Dy³⁺, exposed to ionizing radiation has been measured to understand the LLP luminescence mechanism. Evaluation of the decay constants of the LLP exposed to -, β- or γ-rays at temperatures from 200 to 390 K showed that the decay constant is divided into four components ranging from 10⁻⁴ to 10⁻¹ s⁻¹ with activation energies of 0.02–0.35 eV.

Total luminous intensity from the LLP with changing irradiation temperature has its maximum value around the room temperature. Irradiation at elevated temperature (390 K) has the total luminescence pattern with monotonous decrease as temperature rises. As a result of evaluating the temperature dependence of luminescence, the luminescence mechanism is considered as follows:

Full-size image

 

Gamma-Ray Spectrometer based on a Transition Edge Sensor for Nuclear Materials Analysis

We designed and fabricated a hard X-ray and gamma-ray TES spectrometer for nuclear materials analysis. The superconducting tin absorber is coupled to an Ir/Au TES by using a gold post to improve the thermal contact between the absorber and the TES. The reported energy resolution is 156 eV FWHM at 59.5 keV and 166 eV FWHM at 122 keV gamma-rays. We performed measurement of a Pu sample and clearly separated the \(^{239}\) Pu (56.828 keV) and the \(^{241}\) Am (59.5 keV) peaks by this TES microcalorimeter which cannot be resolved by the HPGe detector.     

A circulating current control scheme for multiple three‐level NPC inverter systems

In recent years, motor drive systems for steel rolling mills have been steadily increasing in capacity. In particular, the development of three‐level NPC (Neutral Point Clamped) inverters is now focusing on the replacement of cycloconverters. In order to satisfy such a requirement, in this paper a multiple three‐level NPC inverter system is proposed. The configuration consists of two three‐level NPC inverters with the same configuration connected in parallel by current limiting reactors. In this case, the circulating current flowing between the two three‐level NPC inverters must be controlled to prevent a decrease in the maximum output capacity. In particular, a new method for control of the circulating current is a major topic of discussion. The method is based on space voltage vector‐based PWM (Pulse Width Modulation) control for the three‐level NPC inverters and the circulating current is controlled by adjusting the output durations of the respective space voltage vectors. In this method the circulating current controller can be decoupled from the motor current controller. Therefore, it is possible to design the different controllers independently. In addition, the experimental results obtained using an induction motor show that the circulating current can be reduced to within 2% of the rated motor current when the motor current response exceeds 1000 rad/s. © 2001 Scripta Technica, Electr Eng Jpn, 136(2): 38–48, 2001     

Difference in the outdoor performance of bulk and thin-film silicon-based photovoltaic modules

Differences in the outdoor performances of bulk (multi- and single-crystalline Si) and thin-film (amorphous Si(a-Si), a-Si/micro-crystalline Si and a-Si/a-SiGe/a-SiGe) photovoltaic (PV) modules are analyzed. The influence of module temperature and solar spectrum distribution on the PV output is clarified. The PV outputs almost only depend on module temperature in bulk-type Si PV modules while that depend both module temperature and spectrum distribution in thin-film ones. Also, the PV outputs of the bulk-type Si PV modules at most frequent condition at outdoor are lower than that at the standard test condition; in contrast, it was the other way round for thin-film ones.     

Oxide thickness dependence of nitridation effects on TDDB characteristics

Wet oxide thicknesses dependence of nitridation effects on electrical characteristics, charge trapping properties and TDDB (Time Dependent Dielectric Breakdown) characteristics have been investigated. It is found that the difference of conduction current between the wet and nitrided wet oxide increases with increasing oxide thickness both for negative and positive bias to the gate until constant current stress is applied. After the stress, with decreasing oxide thickness both in wet and nitrided wet oxide leakage current increases. Up to 60 Å no difference was observed between the wet and nitrided wet oxide but at 50 Å nitrided wet oxide has less increase of current comparing to the wet oxide for the same stress. In wet oxide with increasing stress current density initial hole trap decreases but electron trap increases whereas in nitrided wet oxide has less initial hole trap and also electron trap is less comparing to the wet oxide. Both in wet and nitrided wet oxide for negative bias stress, time to 50 % breakdown decreases with decreasing thickness but at 50 Å a turn-around effect was observed due to nitridation i.e., the 50 % breakdown time is greater for nitrided wet oxide comparing to the wet oxide. On the contrary, for positive bias stress 50 % breakdown time increases with decreasing oxide thickness both in wet and nitrided wet oxide. For positive bias also a turn-around effect is observed at 50 Å i.e., 50% breakdown time is less in nitrided wet oxide comparing to the wet oxide. The improved reliability of nitrided wet oxide at the thin region of 50 Å seems to be due to the increase of more Si---N bond to the interface of oxide and Si comparing to the thick oxide of above 60 Å for the same nitridation conditions.     

Screening the p53 status of human cell lines using a yeast functional assay

We have screened the p53 status of 156 human cell lines, including 142 tumor cell lines from 27 different tumor types and 14 cell lines from normal tissues by using functional analysis of separated alleles in yeast. This assay enables us to score wild-type p53 expression on the basis of the ability of expressed p53 to transactivate the reporter gene HIS3 via the p53-responsive GAL1 promotor in Saccharomyces cerevisiae. Of 142 tumor cell lines, at least 104 lines (73.2%) were found to express the mutated p53 gene: 94 lines (66.2%) were mutated in both alleles, three lines (2.1%) were heterozygous, and no p53 cDNA was amplified from seven lines (4.9%). Of the 14 cell lines originating from normal tissues, all the transformed or immortalized cell lines expressed mutant p53 only. Yeast cells expressing mutant p53 derived from 94 cell lines were analyzed for temperature-sensitive growth. p53 cDNA from eight cell lines showed p53-dependent temperature-sensitive growth, growing at 30 degrees C but not at 37 degrees C. Four temperature-sensitive p53 mutations were isolated: CAT-->CGT at codon 214 (H214R), TAC-->TGC at codon 234 (Y234C), GTG-->ATG at codon 272 (V272M), and GAG-->AAG (E285K). Functionally wild-type p53 was detected in 38 tumor cell lines (26.8%) and all of the diploid fibroblasts at early and late population doubling levels. These results strongly support the previous findings that p53 inactivation is one of the most frequent genetic events that occurs during carcinogenesis and immortalization.     

Induction by leptin of uncoupling protein-2 and enzymes of fatty acid oxidation

We have studied mechanisms by which leptin overexpression, which reduces body weight via anorexic and thermogenic actions, induces triglyceride depletion in adipocytes and nonadipocytes. Here we show that leptin alters in pancreatic islets the mRNA of the genes encoding enzymes of free fatty acid metabolism and uncoupling protein-2 (UCP-2). In animals infused with a recombinant adenovirus containing the leptin cDNA, the levels of mRNAs encoding enzymes of mitochondrial and peroxisomal oxidation rose 2- to 3-fold, whereas mRNA encoding an enzyme of esterification declined in islets from hyperleptinemic rats. Islet UCP-2 mRNA rose 6-fold. All in vivo changes occurred in vitro in normal islets cultured with recombinant leptin, indicating direct extraneural effects. Leptin overexpression increased UCP-2 mRNA by more than 10-fold in epididymal, retroperitoneal, and subcutaneous fat tissue of normal, but not of leptin-receptor-defective obese rats. By directly regulating the expression of enzymes of free fatty acid metabolism and of UCP-2, leptin controls intracellular triglyceride content of certain nonadipocytes, as well as adipocytes.     

Giant calcifying epithelioma of Malherbe (pilomatrixoma): imaging features

We present a case of giant calcifying epithelioma of Malherbe (pilomatrixoma) in the right upper arm of a 62-year-old man. It measured 18 x 12 x 8 cm in size, making it the largest of all the cases reported previously. CT clearly demonstrated a well-defined, subcutaneous mass with amorphous calcifications. The mass showed intermediate signal intensity on T2*-weighted MR images and slight contrast uptake on contrast-enhanced MR images. Histopathologically, this tumor showed no aggressive or malignant nature. The patient is without evidence of recurrence or metastasis 3 years following the resection.