3D and simplified pseudo-2D modeling of single cell of a high temperature solid oxide fuel cell to be used for online control strategies

In the current study, a single cell of a planar SOFC is firstly modeled in 3D using commercial SOFC module of ANSYS Fluent and the results are validated against the experimental investigations in the literature. Many researchers have used ANSYS Fluent for simulating solid oxide fuel cells. However, there is a huge gap in the literature on explaining the detailed procedure that should be followed in order to use this software effectively. A thorough step-by-step approach is presented to provide a deep insight into the software. Thereafter, a simplified quasi-2D method with infinitely shorter computational time is developed and the results are compared with the 3D model. It is found that the reduced model is capable of being utilized as an alternate method for both online diagnosis and designing active control strategies.     

Design of active reconfigurable wheel antenna based on PIN diodes

In this paper we suggest a reconfigurable wheel antenna based on PIN diodes. The antenna is excited by a single-feed and operates in S-band and X-band. Proposed antenna’s structure is composed of two circular rings that are excited by multiple PIN diodes and microstrip lines. Antenna’s reconfiguration is realized by inserting switches into spokes and peripheral regions of a wheel antenna. The required resonance frequency is provided by combination of the structures which are controlling by PIN diodes. Developed antenna was fabricated on a RT duroid material and its pattern measurements were carried out in the outdoor environment. The measured results have demonstrated antenna’s ability to be reconfigurated and good radiation pattern characteristics within two frequency bands.     

Fluxless arc weld-brazing of aluminium alloy to steel

In this work, joining of aluminium alloy AA6061-T6 to Interstitial Free steel using pulsed gas metal arc welding process has been attempted. The effect of different surface conditions of steel (viz, galvanized, galvanealed and uncoated) and gap between the sheets on braze joint formation have been investigated. Galvanized steel surface showed good bead width, joint formation and lap shear strength compared to the other two combinations. Interface gap has not affected the wetting behaviour significantly but presence of a gap of 300 μm or so helped in escape of zinc vapour during the process there by avoiding formation of any crevice or macroporosity in the joint. Features and properties of the joint are characterized by metallography, fractography, energy dispersive spectroscopy (EDS) and lap shear tests. Load carrying capacity of Al-Galvanized steel was highest (222 N/mm of seam length) compared to other combinations, aided by better wetting due to presence of Zn on the surface and minimum porosity due to interfacial gap provided during brazing.     

Magnetic resonance image denoising using nonlocal maximum likelihood paradigm in DCT‐framework

The data acquired by magnetic resonance (MR) imaging system are inherently degraded by noise that has its origin in the thermal Brownian motion of electrons. Denoising can enhance the quality (by improving the SNR) of the acquired MR image, which is important for both visual analysis and other post processing operations. Recent works on maximum likelihood (ML) based denoising shows that ML methods are very effective in denoising MR images and has an edge over the other state‐of‐the‐art methods for MRI denoising. Among the ML based approaches, the Nonlocal maximum likelihood (NLML) method is commonly used. In the conventional NLML method, the samples for the ML estimation of the unknown true pixel are chosen in a nonlocal fashion based on the intensity similarity of the pixel neighborhoods. Euclidean distance is generally used to measure this similarity. It has been recently shown that computing similarity measure is more robust in discrete cosine transform (DCT) subspace, compared with Euclidean image subspace. Motivated by this observation, we integrated DCT into NLML to produce an improved MRI filtration process. Other than improving the SNR, the time complexity of the conventional NLML can also be significantly reduced through the proposed approach. On synthetic MR brain image, an average improvement of 5% in PSNR and 86%reduction in execution time is achieved with a search window size of 91 × 91 after incorporating the improvements in the existing NLML method. On an experimental kiwi fruit image an improvement of 10% in PSNR is achieved. We did experiments on both simulated and real data sets to validate and to demonstrate the effectiveness of the proposed method. © 2015 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 25, 256–264, 2015     

Growth and characterization of diamond particles,diamond films,and CNT-diamond composite films deposited simultaneously by hot filament CVD

It is important to understand the growth of CNT-diamond composite films in order to improve the inter-link between two carbon allotropes, and, in turn, their physical properties for field emission and other applications. Isolated diamond particles, continuous diamond thin films, and thin films of carbon nanotubes (CNTs) having non-uniformly distributed diamond particles (CNT-diamond composite films) were simultaneously grown on unseeded, seeded, and catalyst pre-treated substrates, respectively, using a large-area multi-wafer-scale hot filament chemical vapor deposition. Films were deposited for four different growth durations at a given deposition condition. The changes in surface morphology and growth behavior of diamond particles with growth duration were investigated ex situ using field emission scanning electron microscopy and 2D confocal Raman depth spectral imaging, respectively. A surface morphological transition from faceted microcrystalline nature to nanocrystalline nature was observed as a function of growth duration in the case of isolated diamond particles grown on both unseeded and catalyst pre-treated substrates. However, such a morphological transition was not observed on the simultaneously grown continuous diamond thin films on seeded substrates. 2D confocal Raman depth spectral imaging of diamond particles showed that the local growth of CNTs did not affect the growth behavior of neighboring diamond particles on catalyst pre-treated substrates. These observations emphasize the importance of surface chemical reactions at the growth site in deciding sp² or sp³ carbon growth and the final grain size of the diamond films.     

Microbial community changes with decaying chloramine residuals in a lab-scale system

When chloramine is used as a disinfectant, managing an acceptable “residual” throughout the water distribution systems particularly once nitrification has set in is challenging. Managing chloramine decay prior to the onset of nitrification through effective control strategies is important and to-date the strategies developed around nitrification has been ineffective. This study aimed at developing a more holistic knowledge on how decaying chloramine and nitrification metabolites impact microbial communities in chloraminated systems. Five lab-scale reactors (connected in series) were operated to simulate a full-scale chloraminated distribution system. Culture independent techniques (cloning and qPCR) were used to characterise and quantify the mixed microbial communities in reactors maintaining a residual of high to low (2.18–0.03 mg/L). The study for the first time associates chloramine residuals and nitrification metabolites to different microbial communities. Bacterial classes Solibacteres, Nitrospira, Sphingobacteria and Betaproteobacteria dominated at low chloramine residuals whereas Actinobacteria and Gammaproteobacteria dominated at higher chloramine residuals. Prior to the onset of nitrification bacterial genera Pseudomonas, Methylobacterium and Sphingomonas were found to be dominant and Sphingomonas in particular increased with the onset of nitrification. Nitrosomonas urea, oligotropha, and two other novel ammonia-oxidizing bacteria were detected once the chloramine residuals had dropped below 0.65 mg/L. Additionally nitrification alone failed to explain chloramine decay rates observed in these reactors. The finding of this study is expected to re-direct the focus from nitrifiers to heterotrophic bacteria, which the authors believe could hold the key towards developing a control strategy that would enable better management of chloramine residuals.     

Pricing strategy in the US construction industry

This paper presents several issues related to pricing in construction. First, problems with current pricing strategy in construction are explored. Second, pricing strategies based on a market-based approach are proposed. Third, survey findings of the top 400 US contractors are presented regarding their current pricing practices and the applicability of the proposed pricing strategies. In conclusion, the belief that current pricing strategy in construction is predominantly cost-based is confirmed by the survey findings; indeed, in setting the markup, most contractors rely on their intuition after subjectively assessing the competition. The three internal pricing variables that have the largest statistically significant contingency coefficients with pricing strategy are ‘marketing intelligence capabilities’, ‘annual contract value’, and ‘the type of client in most projects’. ‘Owner's characteristics’, ‘competitors'characteristics’, and ‘market demand’ are statistically significant external variables in making pricing strategy decisions. A change of bidding procedure is proposed so that all parties in construction can maximize the benefits of market-based pricing strategies.