Adsorption and desorption characteristics of lindane, carbofuran and methyl parathion on various Indian soils

Adsorption and desorption characteristics of three insecticides on four Indian soils were studied. Insecticides used were representative of organochlorine, organophosphate, and carbomate groups. The order of adsorption of pesticides on soils was: lindane > methyl parathion > carbofuran. Compost soil had shown the maximum adsorption capacity. The order of adsorption capacity of various soils were: compost soil > clayey soil > red soil > sandy soil. Adsorption isotherms were better fitted to Freundlich model and K_f values increased with increase in organic matter content of the soils. Thermodynamic parameters indicated favorable adsorption of all the three pesticides in four different soils. Adsorption was exothermic in nature. Distilled water desorbed 30–60% of adsorbed pesticides whereas; organic solvents were able to affect 50–80% of sorbed pesticides. Clay content and organic matter played a significant role in pesticide adsorption and desorption processes. Hysteresis effect was observed in red, clayey and compost soils. Hysteresis effect increased with increase in organic matter and clay content of the soils.     

Systematic hardness measurements on mixed and doped crystals of rubidium halides

Efforts are made to improve the hardness of rubidium halide crystals by (i) solid solution hardening and (ii) impurity hardening. Systematic microhardness measurements have been made on rubidium halide mixed crystals (RbBr-RbI and KI-RbI) and rubidium halide crystals doped with Sr²⁺ ions. The composition dependence of the hardness of mixed crystals follows the law ΔH _v =K x (1− x),where ΔH _v is the enhancement in hardness,K a constant andx and (1 −x) the concentrations of the first and second component of the mixed crystals, respectively. The hardness of doped crystals increases with the concentrationC of the dopant according to the law, ΔH _v+6 =k C ^m ,wherek andm are constants. The relative efficacy of the two methods of hardening is discussed.     

Using channel state dependent packet scheduling to improve TCPthroughput over wireless LANs

In recent years, a variety of mobile computers equipped with wireless communication devices have become popular. These computers use applications and protocols, originally developed for wired desktop hosts, to communicate over wireless channels. Unlike wired networks, packets transmitted on wireless channels are often subject to burst errors which cause back to back packet losses. In this paper we study the effect of burst packet errors and error recovery mechanisms employed in wireless MAC protocols on the performance of transport protocols such as TCP. Most wireless LAN link layer protocols recover from packet losses by retransmitting lost segments. When the wireless channel is in a burst error state, most retransmission attempts fail, thereby causing poor utilization of the wireless channel. Furthermore, in the event of multiple sessions sharing a wireless link, FIFO packet scheduling can cause the HOL blocking effect, resulting in unfair sharing of the bandwidth. This observation leads to a new class of packet dispatching methods which explicitly take wireless channel characteristics into consideration in making packet dispatching decisions. We compare a variety of channel state dependent packet (CSDP) scheduling methods with a view towards enhancing the performance of transport layer sessions. Our results indicate that by employing a CSDP scheduler at the wireless LAN device driver level, significant improvement in channel utilization can be achieved in typical wireless LAN configurations. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design of compact two-port dual-band dual-polarized MIMO antenna for CBRS and WLAN sub-6-GHz applications

This communication presents a compact field de-correlation lines integrated dual band with dual-polarized (LP & CP) multiple-input multiple-output (MIMO) antenna for the fifth generation (5G) sub-6-GHz wireless communication systems. Dual working bandwidths, smaller interelement gaps, and superior isolation within the MIMO components are the distinguishing characteristics that give the proposed MIMO system an aspect of novelty. The modeled MIMO antenna has compact configurations of 20 × 21 × 0.8 mm³. The unit cell consists of a microstrip feed line with optimized rectangular slots branches etched from the radiated patch. The MIMO module is generated by the antiparallel replication of a single unit cell. To enhance the isolation, two rectangular slots are incorporated on the patch between the unit elements, which act as field de-correlation lines. The MIMO identity is supported by diversity performance calculations in terms of ECC, DG, and TARC. Simulated and measured counterparts are found in the agreement.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

Reliability models for computer systems: An overview including dataflow graphs

The reliability of a system is the probability that the system will perform its intended mission under given conditions. This paper provides an overview of the approaches to reliability modelling and identifies their strengths and weaknesses. The models discussed include structure models, simple stochastic models and decomposable stochastic models. Ignoring time-dependence, structure models give reliability as a function of the topological structure of the system. Simple stochastic models make direct use of the properties of underlying stochastic processes, while decomposable models consider more complex systems and analyse them through subsystems. Petri nets and dataflow graphs facilitate the analysis of complex systems by providing a convenient framework for reliability analysis.     

An alternate measure of fracture toughness

Linear elastic fracture mechanics has been primarily used for very high strength materials. For such applications it is adequate to measure K_Ic, the plane-strain fracture toughness. It is the objective of this paper to discuss a method for making dynamic fracture toughness measurements, K_Id, which are appropriate for structural grade steels. A simplified scheme for measuring K_Id is also proposed.     

Maximization of representativity factors for experimental planning of cross-section measurements: An information theoretic approach

The similarity between two nuclear systems is expressed by the representativity factors and maximizing its value to unity reduces the uncertainty from its existing value. As the representativity factor is a function of covariance matrix of neutron cross-sections, the inherent systematic uncertainty in neutron cross-sections inhibits it from approaching unity and hence statistical procedures have to be resorted to minimize the systematic uncertainty. As the conventional statistical techniques fail when systematic uncertainty is dominant, we propose an entropy based information theoretic approach of maximizing the mutual information by the knowledge of bounds for the correlated elements. We show that maximizing the mutual information and the representativity factors express the similar phenomena of uncertainty reduction. We estimated the bounds for the correlated elements of the correlation matrix for minor actinides and show how the systematic uncertainty is reduced when lower bound values are considered. These lower bound values aid in experimental planning for future measurement of cross-sections with reduced systematic uncertainty.     

A facile synthesis, in vitro and in vivo MR studies of d-glucuronic acid-coated ultrasmall Ln₂O₃ (Ln = Eu, Gd, Dy, Ho, and Er) nanoparticles as a new potential MRI contrast agent

A facile one-pot synthesis of d-glucuronic acid-coated ultrasmall Ln(2)O(3) (Ln = Eu, Gd, Dy, Ho, and Er) nanoparticles is presented. Their water proton relaxivities were studied to address their possibility as a new potential MRI contrast agent. We focused on the d-glucuronic acid-coated ultrasmall Dy(2)O(3) nanoparticle because it showed the highest r(2) relaxivity among studied nanoparticles. Its performance as a T(2) MRI contrast agent was for the first time proved in vivo through its 3 T T(2) MR images of a mouse, showing that it can be further exploited for the rational design of a new T(2) MRI contrast agent at high MR fields.     

Frequency and temperature dependence of electrical properties of barium and gadolinium substituted SrBi<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics

Barium strontium gadolinium bismuth niobate (Ba_0.1Sr_0.81Gd_0.06Bi₂Nb₂O₉, BSGBN) ceramics were prepared by using the conventional solid-state reaction method. The dielectric permittivity, modulus and impedance spectroscopy studies on BSGBN were investigated in the frequency range, 45 Hz–5 MHz and in the temperature range from room temperature (RT) to 570 °C. The dielectric anomaly with a broad peak was observed at 470 °C. Simultaneous substitution of Ba²⁺ and Gd³⁺ increases the transition temperature of SrBi₂Nb₂O₉ (SBN) from 392 to 470 °C. XRD studies in BSGBN revealed an orthorhombic structure with lattice parameters a = 5.4959 Å, b/a = 1.000, c = 25.0954 Å. Impedance and modulus plots were used as tools to analyse the sample behaviour as a function of frequency. Cole-Cole plots showed a non-Debye relaxation. Also, dc and ac conductivity measurements were performed on BSGBN. The electric impedance which describes the dielectric relaxation behaviour is fitted to the Kohlrausch exponential function. Near the phase transition temperature, a stretched exponential parameter β indicating the degree of distribution of the relaxation time has a small value.