Factors affecting initial bond strength in solvent-based contact adhesives

Novel interpretation is given for the development of initial bond strength maximum in solvent-based contact adhesives at particular elastomer/resin ratios in the adhesive films. Complex relations between initial bond strength, tack of adhesive films, adhesive open time, solvent retention, and resin content in adhesive films are discussed. These results are based on data using polychloroprene adhesives modified with butylphenolic resins and also on previous studies with other contact adhesives. It is suggested that solvent retention is the main factor affecting initial bond strength in solvent-based contact adhesives.     

Modified 5'-trityl nucleosides as inhibitors of Plasmodium falciparum dUTPase

2'-Deoxyuridine triphosphate nucleotidohydrolase (dUTPase) is a potential drug target for the treatment of malaria. We previously reported the discovery of 5'-tritylated analogues of deoxyuridine as selective inhibitors of this Plasmodium falciparum enzyme. Herein we report further structure-activity studies; in particular, variations of the 5'-trityl group, the introduction of various substituents at the 3'-position of deoxyuridine, and modifications of the base. Compounds were tested against both the enzyme and the parasite. Variations of the 5'-trityl group and of the 3'-substituent were well tolerated and yielded active compounds. However, there is a clear requirement for the uracil base for activity, because modifications of the uracil ring result in loss of enzyme inhibition and significant decreases in antiplasmodial action.     

Recycling of metal bearing electronic scrap in a plasma furnace

The recycling of electronic waste and the recovery of valuable components are large problems in the modern world economy. This paper presents the effects of melting sorted electronic scrap in a plasma furnace. Printed circuit boards, cables, and windings were processed separately. The characteristics of the obtained products (i.e., alloy metal, slag, dust, and gases) are presented. A method of their further processing in order to obtain commercial products is proposed. Because of the chemical composition and physical properties, the waste slag is environmentally inert and can be used for the production of abrasives. Process dusts containing large amounts of carbon and its compounds have a high calorific value. That makes it possible to use them for energy generation. The gas has a high calorific value, and its afterburning combined with energy recovery is necessary.     

Nanoparticle Direct Doping: Novel Method for Manufacturing Three‐Dimensional Bulk Plasmonic Nanocomposites

Metallodielectric materials with plasmonic resonances at optical and infrared wavelengths are attracting increasing interest, due to their potential novel applications in the fields of photonics, plasmonics and photovoltaics. However, simple and fast fabrication methods for three‐dimensional bulk plasmonic nanocomposites that offer control over the size, shape and chemical composition of the plasmonic elements have been missing. Here, such a manufacturing method and examples of experimental realizations of volumetric isotropic nanocomposites doped with plasmonic nanoparticles that exhibit resonances at visible and infrared wavelengths are presented. This method is based on doping a low‐melting dielectric material with plasmonic nanoparticles, using a directional glass‐solidification process. Transmission‐spectroscopy experiments confirm a homogenous distribution of the nanoparticles, isotropy of the material and resonant behavior. The phenomenon of localized surface plasmon resonance is also observed visually. This approach may enable rapid and cost‐efficient manufacturing of bulk nanoplasmonic composites with single or multiple resonances at various wavelength ranges. These composites could be isotropic or anisotropic, and potentially co‐doped with other chemical agents, in order to enhance different optical processes.     

Platinum and Palladium Complexes as Promising Sources for Antitumor Treatments

There is a need for new, safer, and more effective agents to treat cancer. Cytostatics that have transition metals at their core have attracted renewed interest from scientists. Researchers are attempting to use chemotherapeutics, such as cisplatin, in combination therapy (i.e., in order to enhance their effectiveness). Moreover, studies are being carried out to modify molecules, by developing them into multinuclear structures, linking different compounds to commonly used drugs, or encapsulating them in nanoparticles to improve pharmacokinetic parameters, and increase the selectivity of these drugs. Therefore, we attempted to organize recent drug findings that contain palladium and platinum atoms in their structures.     

Effect of phosphorylation of the maize starch on thermal generation of stable and short‐living radicals

Effect of hydrolysis, phosphorylation and treatment with high hydrostatic pressure on thermal generation of stable and short‐living radicals in maize starch was studied by X‐ray diffraction (XRD), electron paramagnetic resonance (EPR) spectroscopy, differential scanning calorimetry and polarized light microscopy. Phosphorus was introduced into maize starch as mono‐ and distarch phosphates. XRD indicated localization of phosphate groups in amorphous part of the granule whereas calorimetric data suggested some cross‐linking of the distarch phosphates. Stable and short‐living radicals with unpaired electron localized at carbon atom were generated in all investigated samples in the temperature range commonly used for processing food. The number of detected short‐living radicals, stabilized by a spin trap, is of two orders of magnitude greater than that of the stable radical species. Hydrolysis and phosphorylation strongly increase the number of stable radicals while pretreatment of the starch with high hydrostatic pressure diminishes their amount. The EPR spectra of stable radicals consist of two components, single line and another one with hyperfine structure, indicating interaction of unpaired electron with neighboring hydrogen atom. The EPR spectra of the spin trap adducts with short‐living radicals contain three components from species differing in their dynamic properties depending on localization in zones of various degree of crystallinity.     

ECT图像分析法用于贮料仓卸料过程中剪切区域测量(英文)

The paper covers the electrical capacitance tomography(ECT) data analysis on shear zones formed during silo discharging process.This is due to the ECT aptitude for detection of slight changes of material concentration.On the basis of ECT visualisations,wall-adjacent shear zone profiles are analysed for different wall roughness parameters.The analysis on changes of material concentration,based on ECT images,enables the calculation for the characteristic parameters of shear zones-size and material concentration inside the shear zone in a dynamic process of silo discharging.In order to verify the methodology a series of experiments on gravitational flow of bulk solids under various conditions were conducted with different initial granular material packing densities and silo wall roughness.The investigation shows that the increase in container wall roughness is an effective method for reducing the dynamic effects during the material discharging,since these effects are resulted from the resonance between hopper construction and trembling material.Such effects will damage industrial equipment in practical applications and need further investigation.     

Fractional and <Emphasis Type="Italic">n</Emphasis>D systems: a continuous case

In the paper, a possibility of employing the 2D, and more generally nD systems approach for the analysis of linear fractional degree systems for the introduced here, so-called n-commensurate transfer functions is shown. This approach induces a significant reduction of an overall problem dimensionality and gives interesting insights for stability analysis.     

Carburizer Effect on Cast Iron Solidification

This paper presents the effect of carburizing materials on cast iron solidification and crystallization. The studies consisted of cast iron preparation from steel scrap and different carburizers. For a comparison, pig iron was exclusively used in a solid charge. Crystallization analysis revealed the influence of the carburizer material on the crystallization curves as well as differences in the solidification paths of cast iron prepared with the use of different charge materials. The carburizers’ influence on undercooling during the eutectic crystallization process was analyzed. The lowest undercooling rate was recorded for the melt with pig iron, then for synthetic graphite, natural graphite, anthracite, and petroleum coke (the highest undercooling rate). So a hypothesis was formulated that eutectic cells are created most effectively with the presence of carbon from pig iron (the highest nucleation potential), and then for the graphite materials (crystallographic similarity with the carbon precipitation in the cast iron). The most difficult eutectic crystallization is for anthracite and petroleum coke (higher undercooling is necessary). This knowledge can be crucial when the foundry plant is going to change the solid charge composition replacing the pig iron by steel scrap and the recarburization process.     

Application of triton X-100 surfactant for silicon anisotropic etching in KOH-based solutions

The results of etching of silicon surfaces with different crystallographic orientations in KOH solutions containing a nonionic surfactant Triton X-100 are presented in this paper. The etch rate ratio R(100)/R(110) >1, typical of KOH + IPA and TMAH + Triton X-100 mixtures, is achieved. The surface morphology of Si(hkl) wafers is closely investigated by SEM and AFM. The very low roughness of (110) and its vicinal (hh1) planes is observed and measured. In addition, the relatively smooth (h11) surfaces are obtained in the solution with Triton X-100 surfactant, as compared to the KOH solutions containing alcohols. Due to good smoothness of the studied surfaces, the KOH solution with Triton X-100 seems to be especially interesting for bulk micromachining employing non-standard (hkl) planes. The examples of mesas and trenches fabricated by anisotropic etching in the KOH solution containing Triton X-100 surfactant are presented. Keywords: silicon anisotropic etching;Triton X-100; potassium hydroxide; Si(hkl) surfaces