封装器件多应力叠加失效仿真分析与验证

针对某双列直插式(DIP)封装器件在整机温循试验中出现的失效现象,分析在器件与电路板焊接环节、电路板与整机装配环节和整机温循试验环节3个工况下可能的失效原因,对原因分别进行单工况和多工况的失效仿真分析。针对不同仿真模型在不同工况下的叠加仿真难题,提出基于ANSYS Workbench有限元软件的多应力叠加仿真方法,对比单一工况和多种工况下的仿真结果。结果表明,DIP封装器件失效是器件在焊接尺寸不匹配、过定位装配和温循试验三种工况下,机械应力和热应力的叠加使玻璃绝缘子产生裂纹导致的,有限元仿真结果与实验结果基本吻合,为DIP封装器件在多工况下应力叠加失效的故障机理研究提供一种可参考的仿真方法。     

Does PageRank apply to service ranking in microservice regression testing?

Software Quality Journal - Regression testing is required in each development iteration of microservice systems. Test case prioritization, which improves the fault detection rate by optimizing the...     

Data-driven physical law learning model for chaotic robot dynamics prediction

Applied Intelligence - A robot control system is a multivariable, nonlinear automatic control system, as well as a dynamic coupling system. To address the difficult problem of data prediction under...     

Healing Effect of Controlled Anti‐Electromigration on Conventional and High‐Tc Superconducting Nanowires

The electromigration process has the potential capability to move atoms one by one when properly controlled. It is therefore an appealing tool to tune the cross section of monoatomic compounds with ultimate resolution or, in the case of polyatomic compounds, to change the stoichiometry with the same atomic precision. As demonstrated here, a combination of electromigration and anti‐electromigration can be used to reversibly displace atoms with a high degree of control. This enables a fine adjustment of the superconducting properties of Al weak links, whereas in Nb the diffusion of atoms leads to a more irreversible process. In a superconductor with a complex unit cell (La_2?x Ce_x CuO₄), the electromigration process acts selectively on the oxygen atoms with no apparent modification of the structure. This allows to adjust the doping of this compound and switch from a superconducting to an insulating state in a nearly reversible fashion. In addition, the conditions needed to replace feedback controlled electromigration by a simpler technique of electropulsing are discussed. These findings have a direct practical application as a method to explore the dependence of the characteristic parameters on the exact oxygen content and pave the way for a reversible control of local properties of nanowires.     

Greenhouse gases mitigation by CO<Subscript>2</Subscript> reforming of methane to hydrogen-rich syngas using praseodymium oxide supported cobalt catalyst

This study focuses on the potential of hydrogen-rich syngas production by CO₂ reforming of methane over Co/Pr₂O₃ catalyst. The Co/Pr₂O₃ catalyst was synthesized via wet-impregnation method and characterized for physicochemical properties by TGA, XRD, BET, H₂-TPR, FESEM, EDX, and FTIR. The CO₂ reforming of methane over the as-synthesized catalyst was studied in a tubular stainless steel fixed-bed reactor at feed ratio ranged 0.1–1.0, temperature ranged 923–1023 K, and gas hourly space velocity (GHSV) of 30,000 h^?1 under atmospheric pressure condition. The catalyst activity studies showed that the increase in the reaction temperature from 923 to 1023 K and feed ratio from 0.1 to 1.0 resulted in a corresponding increase in the reactant’s conversion and the product’s yields. At 1023 K and feed ratio of 1.0, the activity of the Co/Pr₂O₃ catalyst climaxed with CH₄ and CO₂ conversions of 41.49 and 42.36 %. Moreover, the catalyst activity at 1023 K and feed ratio of 1.0 resulted in the production of H₂ and CO yields of 40.7 and 40.90 %, respectively. The syngas produced was estimated to have H₂:CO ratio of 0.995, making it suitable as chemical building blocks for the production of oxygenated fuel and other value-added chemicals. The used Co/Pr₂O₃ catalyst which was characterized by TPO, XRD, and SEM-EDX show some evidence of carbon formation and deposition on its surface.     

Influence of Sn and Mo on corrosion behavior of ferrite-pearlite steel in the simulated bottom plate environment of cargo oil tank

This work investigated the influence of Sn and Mo on corrosion behavior of ferrite-pearlite steel in the simulated bottom plate environment of cargo oil tank. The results indicate that the corrosion rate of three ferrite-pearlite steels increased with extending the immersion time due to the continuous accumulation of the residual Fe_3C. However, the addition of Sn or the combined addition of Sn and Mo could reduce the corrosion rate of Sn containing steel and Sn-Mo containing steel to 37.5% and 20% of that of carbon steel, respectively. Moreover, the cathodic reaction of Sn containing steel and Sn-Mo containing steel was always controlled by the charge transfer step during the whole immersion test, while that of carbon steel was gradually transformed into the diffusion-controlled process. These results were mainly related with the deposition of metallic Sn and Mo on the steel surface. The metallic Sn and Mo with uniform distribution restrained the galvanic effect through suppressing both the anodic dissolution of ferrite and cathodic hydrogen evolution reaction on the residual Fe_3C.     

压电谐振驱动三足机器人的平面运动

设计并实现了一类利用压电陶瓷片作动,由三条曲梁足支撑的振动驱动机器人.建立了在一条足共振驱动下机器人水平运动的动力学方程,数值计算解释了摩擦作用下的运动机理,寻找到异性摩擦对运动方向、速度的影响和压电激励频率与运动速度间的关系.通过建立圆弧曲梁控制方程求解圆弧型足面内振动的固有频率及振型,设计了三组不同频率的圆弧曲梁足参数,实验制作了机器人模型,利用压电控制三足间振动的共振切换,实现了预想的三个方向的运动以达到平面运动的效果,实验测量了机器人的运动速度与理论计算吻合得较好.     

基于BP神经网络的汽包建模及其控制器设计

针对锅炉汽包系统的强耦合性和非线性及传统的PID控制方法存在控制精度低、调节时间长等问题,提出了利用基于数据的建模方法,对汽包系统进行误差反向传播(BP)神经网络建模,并对神经网络模型进行泛化能力测试,然后利用基于BP神经网络的PID控制方法设计汽包液位优化控制器.实验仿真结果表明,基于BP神经网络建立的汽包模型具有较好的泛化能力,神经网络PID优化控制器在控制精度高、收敛速度快和鲁棒性强等方面都优于传统PID控制器.     

Implementation and evaluation of parallel FFT on Engineering and Scientific Computation Accelerator (ESCA) architecture

The fast Fourier transform (FFT) is a fundamental kernel of many computation-intensive scientific applications.This paper deals with an implementation of the FFT on the accelerator system,a heterogeneous multi-core architecture to accelerate computation-intensive parallel computing in scientific and engineering applications.The Engineering and Scientific Computation Accelerator (ESCA) consists of a control unit and a single instruction multiple data (SIMD) processing element (PE) array,in which PEs communicate with each other via a hierarchical two-level network-on-chip (NoC) with high bandwidth and low latency.We exploit the architecture features of ESCA to implement a parallel FFT algorithm efficiently.Experimental results show that both the proposed parallel FFT algorithm and the ESCA architecture are scalable.The 16-bit fixed-point parallel FFT performance of ESCA is compared with a published work to prove the superiority of the mapping algorithm and the hardware architecture.The floating-point parallel FFT performances of ESCA are evaluated and compared with those of the IBM Cell processor and GPU to demonstrate the computing power of the ESCA system for high performance applications.     

基于梯度的方向信息在指纹预处理中的应用

为了提高指纹图像预处理算法的抗噪能力,给出了一种基于梯度的指纹方向图获取方法,并利用指纹图像的方向信息进行指纹图像的预处理,得到了更为精确的指纹细节点图.在指纹预处理过程中引入该方法,能有效地改善指纹纹线的质量.实验分析表明,该方法具有很好的使用价值.