Comparison of three‐dimensional analysis and stereological techniques for quantifying lithium‐ion battery electrode microstructures

Lithium‐ion battery performance is intrinsically linked to electrode microstructure. Quantitative measurement of key structural parameters of lithium‐ion battery electrode microstructures will enable optimization as well as motivate systematic numerical studies for the improvement of battery performance. With the rapid development of 3‐D imaging techniques, quantitative assessment of 3‐D microstructures from 2‐D image sections by stereological methods appears outmoded; however, in spite of the proliferation of tomographic imaging techniques, it remains significantly easier to obtain two‐dimensional (2‐D) data sets. In this study, stereological prediction and three‐dimensional (3‐D) analysis techniques for quantitative assessment of key geometric parameters for characterizing battery electrode microstructures are examined and compared. Lithium‐ion battery electrodes were imaged using synchrotron‐based X‐ray tomographic microscopy. For each electrode sample investigated, stereological analysis was performed on reconstructed 2‐D image sections generated from tomographic imaging, whereas direct 3‐D analysis was performed on reconstructed image volumes. The analysis showed that geometric parameter estimation using 2‐D image sections is bound to be associated with ambiguity and that volume‐based 3‐D characterization of nonconvex, irregular and interconnected particles can be used to more accurately quantify spatially‐dependent parameters, such as tortuosity and pore‐phase connectivity.     

Multipoint scanning dual‐detection confocal microscopy for fast 3D volumetric measurement

We propose a multipoint scanning dual‐detection confocal microscopy (MS‐DDCM) system for fast 3D volumetric measurements. Unlike conventional confocal microscopy, MS‐DDCM can accomplish surface profiling without axial scanning. Also, to rapidly obtain 2D images, the MS‐DDCM employs a multipoint scanning technique, with a digital micromirror device used to produce arrays of effective pinholes, which are then scanned. The MS‐DDCM is composed of two CCDs: one collects the conjugate images and the other collects nonconjugate images. The ratio of the axial response curves, measured by the two detectors, provides a linear relationship between the height of the sample surface and the ratio of the intensity signals. Furthermore, the difference between the two images results in enhanced contrast. The normalising effect of the MS‐DDCM provides accurate sample heights, even when the reflectance distribution of the surface varies. Experimental results confirmed that the MS‐DDCM achieved high‐speed surface profiling with improved image contrast capability.     

Phase‐shifting differential interference contrast microscope with Savart shear prism and rotatable analyser

A novel differential interference contrast microscope (DICM) is proposed in this research. It is constituted by inserting a Savart shear prism between the objective and sample of a polarising microscope having a rotatable analyser as the phase‐shifter, and it is with the ability to enhance image contrast using the principle of shearing interferometry. This letter is to introduce the configuration, interpret the interference patterns and present the experimental setup of the DICM. In addition, this letter is to display the experimental results from the uses of the setup; the results demonstrate the validity and ability of the DICM.     

Electrical Properties of Sputter-deposited ZrO2-based Pt/ZrO2/Si Capacitors

Pt/ZrO2/Si sandwich structures where ZrO2 is deposited by radio frequency （r.f.） magnetron sputtering using a Zr target in an atmosphere of O2/Ar gas mixture, were fabricated and the effects of the O2/Ar flow ratio in the reactive sputtering process, the annealing temperature, the ZrO2 film thickness on the structure, the surface roughness of ZrO2 films and the electric properties of Pt/ZrO2/Si metal-oxide-semiconductor （MOS） capacitors were investigated. The optimum process parameters of the Pt/ZrO2/Si capacitor based on reactively sputtered-ZrO2 determined in such a way as the capacitance is maximized and the leakage current, the oxide charge, and the interface trap density are minimized that is the O2/Ar flow ratio of 1.5, the annealing temperature of 800℃, and the film thickness of 10 nm. Also the conduction mechanism in the Pt/ZrO2/Si capacitor has been discussed.     

Numerical modelling of a low power non-transferred arc plasma reactor for methane conversion

Thermal flow characteristics and the methane conversion reaction in a low power arc plasma reactor for efficient storage and transport of methane, which is the main component of shale gas, were simulated. The temperature and velocity distributions were calculated according to the type of discharge gases and arc current level by a self-developed magnetohydrodynamics (MHD) code and a commercial ANSYS-FLUENT code; the transport of chemical species was analyzed as including the chemical reactions of methane conversion. The simulated results were verified by the comparison of calculated and measured arc voltages with permissible low error as under 4%. Three C₂ hydrocarbon gases with ethane (C₂H₆), ethylene (C₂H₄), and acetylene (C₂H₂) were selected as the converted species of methane from experimental data. The mass fraction of C₂ hydrocarbons and hydrogen as the product of the conversion reaction at the reactor was also calculated. Those values show good agreement with the actual experimental results in that the major conversion reaction occurred in C₂H₂ and hydrogen, and the conversions to C₂H₆, C₂H₄, and hydrogen were minor reactions of methane pyrolysis conversion.     

TOXICITY, MUTAGENICITY AND TERATOGENICITY OF BREVIANAMIDE, VIOMELLEIN AND XANTHOMEGNIN; SECONDARY METABOLITES OF PENICILLIUM VIRIDICATUM

The three major secondary metabolites of Penicillium viridicatum, brevianamide, xanthomegnin, and viomellein were tested for mutagenicity by the Salmonella/microsome test and for toxicity and teratogenicity by the chick embryo test. None were mutagenic. Viomellein was mildly toxic and teratogenic, xanthomegnin was the most toxic and was not a teratogen, and brevianamide was not toxic yet was the most teratogenic.     

LIPID AND CHOLESTEROL OXIDATION,COLOR CHANGES,AND VOLATILE PRODUCTION IN IRRADIATED RAW PORK BATTERS WITH DIFFERENT FAT CONTENT1

An emulsion-type product was prepared to determine the effect of irradiation on lipid and cholesterol oxidation, color change, and volatile production in raw pork with different fat contents. Lipid oxidation increased with an increase in fat content or irradiation dose. Irradiated batters had higher cholesterol oxides than nonirradiated, and the major cholesterol oxides formed in irradiated pork batters were 7α- and 7β-hydroxycholesterol. Hunter color a- and b-values of raw pork batters were decreased by irradiation regardless of fat content. Irradiation increased the amount ofvolatiles significantly. Although lipid oxidation of high fat products (10 and 15% fat) was higher than that of low fat products (4%), high fat products did not always produce greater amount of volatiles. In summary, irradiation increased lipid and cholesterol oxidation, volatiles production and had detrimental effects on the color of raw pork batters under aerobic condition.     

SYNERGISTIC EFFECT OF VITAMIN B1 ON SANITIZER AND DISINFECTANT TREATMENTS FOR REDUCTION OF BACILLUS CEREUS IN RICE

The synergistic bactericidal effects of vitamin B₁ (thiamine dilauryl sulfate) and the efficacy of commercial sanitizers for minimization of Bacillus cereus contamination in cooked rice were investigated. Sanitizer-treated rice exhibited a greater reduction than water-treated rice, while sanitizer-treated rice with Vitamin B₁ produced an even greater reduction. The treatments for B. cereus in rice included (1) 100 ppm hydrogen peroxide with 500 ppm vitamin B₁; (2) 200 ppm hydrogen peroxide with 100 ppm vitamin B₁; (3) 400 ppm hydrogen peroxide; (4) 50 ppm chlorine with 500 ppm vitamin B₁; (5) 60 ppm chlorine with 300 ppm vitamin B₁; (6) 70 ppm chlorine with 100 ppm vitamin B₁; (7) 80 ppm chlorine; and (8) 100,000 ppm ethanol with 500 vitamin B_1. All treatments completely eliminated B. cereus in rice. The sensory properties of all sanitizer-treated cooked rice did not differ significantly from the same properties for water-treated cooked rice.

PRACTICAL APPLICATIONS

The prevalence of Bacillus cereus in rice and rice products has been documented and control of the growth of B. cereus in rice is an important consideration. The results obtained from this study can be of use to rice producers in the manufacture of safe products. Although chemical disinfectants can be used to reduce the amount of B. cereus in rice, vitamin B₁ can also be used as an effective additive that reduces the amount of disinfectant use via a synergistic antimicrobial effect. The increasing use of chemical disinfectants for safety in the food industry can be reversed using our method.