利用大流量液压支架控制顶板事故的发生

通过对工作面端面冒顶原因及支护系统的分析得出，加大液压支架的流量可以加快移架速度，降低冒顶事故率，提高生产效率。     

Evaluation of Morphology—Stable Critical Size of KNbO3 Crystals

Skeletal form of KnbO3 crystals growing in Li2B4O7 solvent was in-situ observed at 900℃ and it was found that shallow depression started to develop on the surface of KnbO3 crystals when the crystal size exceeded several micron,typically 7 micron.Based on the quantitative criterion derived by Chernov,the estimated critical size of KNbO3 crystals was 1 micron,which was consistent with the experimental measurement.The kinetic coefficients,Kcorner and Kcr,in the criterion were experimentally obtained in the diffusive-convective and diffusive-advective flow states respectively.     

轻钢结构屋面的应用

针对轻钢结构构屋面系统的性能、特点、构造和施工方法进行了论述，介绍了与传统建筑形成对照的一种新型结构形式，使传统的重盖、肥梁、胖柱、色彩单一的建筑状况得到改善。轻钢结构的优点将使它的生产规模、适用范围不断扩大，从而以其漂亮的外和合理的造价美化人类的生活环境。     

Parallel Pattern-Based Systems for Computational Biology: A Case Study

Computational biology research is now faced with the burgeoning number of genome data. The rigorous postprocessing of this data requires an increased role for high-performance computing (HPC). Because the development of HPC applications for computational biology problems is much more complex than the corresponding sequential applications, existing traditional programming techniques have demonstrated their inadequacy. Many high level programming techniques, such as skeleton and pattern-based programming, have therefore been designed to provide users new ways to get HPC applications without much effort. However, most of them remain absent from the mainstream practice for computational biology. In this paper, we present a new parallel pattern-based system prototype for computational biology. The underlying programming techniques are based on generic programming, a programming technique suited for the generic representation of abstract concepts. This allows the system to be built in a generic way at application level and, thus, provides good extensibility and flexibility. We show how this system can be used to develop HPC applications for popular computational biology algorithms and lead to significant runtime savings on distributed memory architectures.     

拉伸速率对PP/GB复合材料力学性能的影响

应用Instron材料试验机考察了室温下拉伸速率对玻璃微珠填充聚丙烯复合材料的弹性模量和屈服强度的影响，结果表明，随着微珠含量的增加，试样的弹性模量（Ec）增大，且与拉伸应变速率呈近乎幂律函数关系，而屈服强度（бyc）则随着微珠体积分数（Φf）的增加呈线性函数形式下降，并随着拉伸应变速率的增加呈幂律函数形式提高，此外，讨论了Ec、Φf与бyc三者之间的关系。     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

现场总线技术在发电系统数据采集中的应用

介绍了现场总线网络在干熄焦汽轮机发电生产过程中所起的作用，并重点介绍了系统所完成的数据采集，监视和管理等功能。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

二阶系统变阻尼技术研究

本文基于测速反馈原理，针对二阶系统提出了两种改变系统阻尼的方法。通过适当改变测速反馈系数，可使闭环系统的阻尼比按期望的规律变化（阻尼比可以为负），从而可显著地加快系统的输出响应，使系统的动态性能大为改善。文中提供了仿真算例。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响