薄板坯连铸连轧流程Ti微合金化高强钢开发与应用

在薄板坯连铸连轧流程上，经过对Ti微合金化技术研究，有效解决了Ti微合金化强度性能波动大的问题，开发出屈服强度450～700MPa高强钢。对试制钢组织性能和工业应用分析研究，表明该产品通板性能良好，通板强度差30MPa左右；成形性能良好，d=0时冷弯测试全部合格；同时还具有良好焊接性能，焊接后，强度波动较小，均在母材部位断开；试制钢显微组织为珠光体和铁素体，晶粒均匀细小，平均尺寸为4～8／μm；实物质量满足集装箱和汽车制造行业要求，具有广阔市场前景。     

合理开发利用钨矿资源 促进钨矿业可持续发展

简述了我国钨矿业概况、现有采选技术水平及钨矿加工利用率 ;从资源配置出发 ,阐述了钨矿业发展存在的几个主要问题 ,并且针对性地提出了可持续发展的几点建议。     

软交换技术的发展及其应用

软交换是下一代网络NGN的核心技术，本文从软交换的概念入手，介绍了软交换的基本功能及其优点．软交换的网络系统结构、软交换的对外接口等内容，并探讨了软交换技术的应用。     

Effects of compressive and tensile stress on the growth mode of epitaxial oxide films

Oxide films were deposited on different substrates by laser molecular beam epitaxy. Reflection high-energy electron diffraction was performed to in situ investigate the change of growth mode and the lattice relaxation during the growth. An asymmetrical phenomenon was found in the two kinds of strain states, compressive stress and tensile stress of heterostructures with different lattice mismatch. In the case of BaTiO₃/SrTiO₃ (2.2%), 2D layer-by-layer growth mode without lattice relaxation can be maintained for a longer period for BTO films on STO with compressive stress, comparing to STO films on BTO with tensile stress. When MgO films were deposited on SrTiO₃ with a large mismatch of 7.8%, compressive stress leads to rapid lattice relaxation with a very thin wet layer, and 3D strained island were observed. As a comparison, SrTiO₃ films on MgO with tensile stress were configured. No RHEED patterns can be observed duo to a large tensile stress.     

憎水性栀子蓝色素制备的研究

以浓盐酸为催化剂,采用乙酸酐酯化处理水溶性栀子蓝色素,制备了憎水性栀子蓝色素.探讨了栀子蓝色素与乙酸酐料液比、反应时间和反应温度等因素对憎水性栀子蓝色素色价的影响.结果表明:采用料液比1:20,在常温下反应4 h,为制备憎水性栀子蓝色素的最优条件.同时,通过红外光谱、可见吸收光谱及溶解性对栀子蓝色素的酯化改性进行了初步的探讨.     

烧结砖与墙体材料革新

1中国墙体材料的发展中国经济的快速发展拉动了建筑业及其相关的墙体材料的需求与生产,墙体材料获得了很大发展。1.1墙体材料品种越来越丰富,基本适应了建筑业的需求     

Behaviors of concrete-filled steel tubular members subjected to combined loading

The present study is an investigation on the behaviors of concrete-filled thin-walled steel tubular members subjected to combined loading, such as compression and torsion, bending and torsion, compression, bending and torsion. ABAQUS software is used in this paper for the finite element analysis (FEA). A comparison of results calculated using this modeling shows generally good agreement with test results. The FEA modeling is then used to investigate the influence of important parameters that determine the ultimate strength of the composite members under combined loading, such as compression and torsion, bending and torsion, compression, bending and torsion. The parametric studies provide information for the development of formulae for calculating the ultimate strength of the composite members subjected to combined loading.     

非烧结砖的发展、问题及对策

非烧结砖是相对于烧结砖而言的，即不经烧结而用于砌筑墙体的砖。     

天津市水环境污染综合整治思路

天津市位于海河流域下游．历史上曾得益于海河丰沛的水资源，自进入20世纪70年代以后．由于流域内人口增长、经济发展、用水量增加，致使河流入境水量急剧减少。1983年引滦入津工程建成通水，天津城市缺水的局面暂时得到缓解，但引滦供水能力有限，供水保证率较低，1997～2000年连续干旱，引滦源头潘家口水库蓄水降至死库容以下。为解决天津城市缺水，2000年再次引黄济津。