云南黄磷工业进一步发展的探讨

针对当前世界各国黄磷生产能力削减的形势，指出云南黄磷工业进一步发展的主要问题、前景，并就此提出了自己的见解，对有关产业政策进行讨论     

沥青带水磺化工艺的研究

通过沥青磺化过程的主反应和副反应，进一步讨论了磺化工艺的原理，磺化试剂的选择，溶剂的组成，带水速度，溶剂的回收方式等各种因素对产品质量的影响。     

PA66/UHMWPE合金的力学性能和微观结构研究

制备了PA66／uHMwPE／HDPE-g-MAH共混合金，并对其力学性能和微观结构进行了研究。结果表明，随着UHMWPE质量分数的增加，共混合金常温和低温下的缺口冲击强度都显著提高，拉伸强度和拉伸模量下降，但仍能保持较高的力学性能；添加了UHMWPE的PA66合金的断裂面有大量的空穴产生和应力发白现象。     

高固含乳液压敏胶的粒径分析

运用多阶段乳液聚合法可以有效合成高固含乳液乳液粒径无论是单元分散还是多元分散均能实现高固含化在保持乳液稳定的条件下，如果乳液粒径是单元分散，当粒径足够大或者粒径分布足够宽时，乳液实现高固含的同时，可以达到低黏度目的如果是多元分散，粒径分布一般较宽，非常有利于实现乳液低黏度下的高固含化，当乳液的大粒子质量分数在80％左右时最容易达到目的.     

甲醇在聚苯胺修饰铂钼共沉积电极上的催化氧化

用恒电位法和循环伏安法在铂电极上分别制备了聚苯胺修饰的分散氢钼青铜电极和分散铂电极,以及聚苯胺修饰的不同铂钼比例的铂与氢钼青铜共沉积电极。用循环伏安法研究了制备电极在c(H2SO4)=0.5mol/L水溶液中的电化学行为,以及对c(CH3OH)=0.1 mol/L的催化氧化行为。其中,分散氢钼青铜电极对甲醇无催化氧化的作用,铂与氢钼青铜共沉积电极对甲醇的催化氧化效果优于分散铂电极。铂-氢钼青铜共沉积电极对甲醇氧化的催化能力与共沉积铂钼的比例有关,当制备电极所用的溶液中n(氯铂酸)∶n(钼酸钠)=2∶1时,共沉积电极对甲醇的催化氧化活性最高,此时甲醇在共沉积电极上的氧化峰电流是单纯铂电极的2.632倍。     

SO_4~(2-)/TiO_2-Hβ固体超强酸催化合成乙酸正丁酯

采用均匀沉淀法制备的SO24-/TiO2-Hβ复合型固体超强酸催化剂应用于乙酸正丁酯的合成中,得出最佳合成条件为反应时间4h,原料正丁醇与乙酸的摩尔配比1.3∶1,催化剂用量为乙酸用量的3%,乙酸正丁酯的收率95.6%。     

Spinning and drawing properties of ultrahigh‐molecular‐weight polyethylene fibers prepared at varying concentrations and temperatures

The concentrations and temperatures of ultrahigh‐molecular‐weight polyethylene (UHMWPE) gel solutions exhibited a significant influence on their rheological and spinning properties. The shear viscosities of UHMWPE solutions increased consistently with increasing concentrations at a constant temperature above 80°C. Tremendously high shear viscosities of UHMWPE gel solutions were found as the temperatures reached 120–140°C, at which their shear viscosity values approached the maximum. The spinnable solutions are those gel solutions with optimum shear viscosities and relatively good homogeneity in nature. Moreover, the gel solution concentrations and spinning temperatures exhibited a significant influence on the drawability and microstructure of the as‐spun fibers. At each spinning temperature, the achievable draw ratios obtained for as‐spun fibers prepared near the optimum concentration are significantly higher than those of as‐spun fibers prepared at other concentrations. The critical draw ratio of the as‐spun fiber prepared at the optimum concentration approached a maximum value, as the spinning temperature reached the optimum value of 150°C. Further investigations indicated that the best orientation of the precursors of shish‐kebab‐like entities, birefringence, crystallinity, thermal and tensile properties were always accompanied with the as‐spun fiber prepared at the optimum concentration and temperature. Similar to those found for the as‐spun fibers, the birefringence and tensile properties of the draw fibers prepared at the optimum condition were always higher than those of drawn fibers prepared at other conditions but stretched to the same draw ratio. Possible mechanisms accounting for these interesting phenomena are proposed.     

复合硅酸盐水泥固化含氟污泥的试验研究

采用复合硅酸盐水泥对含氟污泥进行固化处理并制取了不同污泥掺量的水泥标准试块，考察了掺量对试块抗压强度、氟离子浸出量、物相转变和晶体形态的影响。结果表明，当含氟污泥掺量为10％时，试块强度高，氟离子浸出量低，是较为适宜的污泥掺加比例。10％掺量试块28天抗压强度达到22.2 MPa，满足一般垫层、基础、地坪及受力不大的结构强度要求；10％掺量试块在地下水和酸雨作用下的氟离子浸出量分别为0.16 mg/L和0.39 mg/L，远小于危险废物100 mg/L的标准限值，安全性较高；机理研究表明，氟化钙污泥的加入加快了水泥中C3A的水化速度，增加了早期AFt生成量，提高了试块早期强度。     

火电厂运行生产准备人员培训思路探讨

火电厂生产准备期间的技术要求和各阶段的工作目标是环环相扣的,因此,生产准备人员的培训工作应紧密追踪工程进度,做到"以责任制落实来保证培训工作的到位,以考核机制来强化培训工作的完成"。     

多无限远目标模拟装置光轴共面测试技术研究

提出一种基于激光准直五棱镜回转扫描和CCD技术的非接触检测方法,通过检测三块立板平面度来实现对多无限远目标模拟装置光轴共面度的高精度非接触测量。给出误差评定方法,同时对仪器精度进行分析,通过实验测得共面度为0.039mm,满足精度要求。