波浪力计算中的一个新边界元方法

本文就波浪与结构物作用问题，提出了一个新的高阶边界元方法。较之Ｅａｔｏｃｋ Ｔｏｙｌｏｒ和Ｃｈａｕ的方法，本文在体内附助积分方程中应用了满足刚性水面条件和弱刚性底面条件的简单格林函数。计算速度相应地有所提高；漂浮结构的积分方程更为简洁；计算结果与Ｅａｔｏｃｋ Ｔａｙｌｏｒ和Ｃｈａｕ的方法具有几乎相同的精度和收敛速度。     

A study of stacking faults in deformed austenitic stainless steel by X-ray diffraction

Making use of the data obtained already in our laboratory on elongated, quenched samples of austenitic steel lCrl8Ni9, such as the effective domain size D_eff, the average dislocation density-ρ, the average dislocation configuration parameter, -M, the range of strain field -R_e, the elastic energy density 〈E/V〉,etc., some exact and clear expressions for the relation of intrinsic stack-ing fault (SF) density α′, extrinsic SF density α″, twin fault density β, SF energy γ, true particle size D₀, minimum value of the fault width T_min, and maximum particle size D_max are given.     

HIWIN丝杠导轨的特点和应用

HIWIN是世界知名的滚动直线传动产品研发及制造大厂,其中尤其以滚动直线导轨、滚珠丝杠产品为重中之重。天津罗升企业作为HIWIN产品在中国大陆、香港及新加坡的总代理,2006年市     

基于金刚石薄膜的微间隙室制备

采用金刚石薄膜作为阴-阳极间绝缘介质层是一种新型的微间隙室(MGC)结构。该文详细介绍和讨论了采用常规的微细加工工艺制备基于金刚石薄膜介质层的MGC的制备技术,其典型结构为阳极微条宽20μm,微条间隔180μm,器件探测区面积为38 mm×34 mm。采用热丝CVD法制备的金刚石薄膜作为阴-阳极间绝缘介质层,厚7~8μm,具有(100)晶面结构。金刚石的刻蚀采用反应离子刻蚀,Cr作掩膜,O2和SF6为刻蚀气体,刻蚀速率为79 nm/min,与Cr的刻蚀比约为20:1。实验结果表明,采用的微加工结合自套准工艺可很好地解决金刚石薄膜的制备、图形化及金属阳极电极与金刚石薄膜的相互套准等金刚石薄膜的可加工性及兼容性问题,并制备出采用金刚石薄膜作为电极间绝缘介质层的新型MGC结构。     

Combined-Stage Sintering Model

By focusing on the similarities between the three stages of sintering, a single equation is derived that quantifies sintering as a continuous process from beginning to end. The microstructure is characterized by two separate parameters representing geometry and scale. The dimensionless geometry parameter, denoted T, comprises five scaling factors that relate specific microstructural featuers (e.g., surface curvature) to the scale (grain diameter). Calculations of T from experimental data show (a) agreement with computer simulations of initial-stage sintering, (b) the effect of surface diffusion on T, and (c) changes in T with microstructural evolution during sintering. Application of the model to the design of firing schedules and the study of microstructural geometry effects on sintering is discussed.     

The globally Bi-3-connected property of the honeycomb rectangular torus

The honeycomb rectangular torus is an attractive alternative to existing networks such as mesh-connected networks in parallel and distributed applications because of its low network cost and well-structured connectivity. Assume that m and n are positive even integers with n ? 4. It is known that every honeycomb rectangular torus HReT(m,n) is a 3-regular bipartite graph. We prove that in any HReT(m,n), there exist three internally-disjoint spanning paths joining x and y whenever x and y belong to different partite sets. Moreover, for any pair of vertices x and y in the same partite set, there exists a vertex z in the partite set not containing x and y, such that there exist three internally-disjoint spanning paths of G-{z} joining x and y. Furthermore, for any three vertices x, y, and z of the same partite set there exist three internally-disjoint spanning paths of G-{z} joining x and y if and only if n ? 6 or m = 2.     

基于IPv6校园网的智能选课系统的J2EE架构的设计与实现

通过分析IPv6校园网自主学习模式下的自主选课问题,提出了利用J2EE技术构建基于IPv6校园网的智能选课系统的总体结构及具体实现.     

南宁市西明江河道生态修复、防护设计初探

针对南宁市西明江河道现状及问题，从综合截排污、河道整治、环境生态恢复工程及补水4个方面提出河道生态修复及防护设计方案。     

酸性染料与分散染料同浴浸染单板工艺实践

厚单板染色加工难以获得良好的透染性、均染性和较高的色牢度。采用高温高压工艺和分散性、渗透性较好的染料浸染厚单板，可以获得良好的染色效果。     

THE APPLICATION OF COKELET''''S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative waveangular frequency in wave-current field were calculated in this paper.It is indicated by numeri-cal calculation that if the water depth is not too small,the result given by authors'calculationare very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel-ative wave angular frequency by linear wave theory;but if water depth is rather small,thereare some discrepancy,