轧后穿水冷却工艺对棒材组织性能的影响

针对轧机产量提高后冷床冷却能力不足的问题 ,研制开发了棒材轧后穿水冷却技术。通过对小规格 2 0MnSiV热轧带肋钢筋进行轧后穿水冷却 ,钢材上冷床温度降低了 90～ 110℃ ,提高了产品质量 ,改善了各项力学性能 ,抗拉强度平均提高了 3 5～ 40MPa ,钢材性能合格率由 97.5 %提高到了 99.6% ,解决了冷床冷却能力不足、制约生产的瓶颈问题。     

用于光纤陀螺仪的保偏光纤

阐述了光纤陀螺仪对保偏光纤的基本性能要求,并介绍了一种新型直径为80 μm保偏光纤的主要性能参数和特征.     

钻井井控仿真中多Agent系统建模研究

针对钻井井控作业特点及传统钻井井控仿真系统的不足之处,提出利用多智能体(Agent)技术,建立一种新型的基于Agent的智能化分布式井控仿真模型。利用Agent的自主性、协作性和反应性,使井控设备的操作在任意状况下都能够及时准确地反映各种井控规律及井控现象。对钻井井控仿真多Agent系统模型、各Agent的内部结构、Agent的知识表示方法及Agent间通信方式进行了详细阐述。给出了基于Agent的正常钻井井控仿真训练实例,较好地解决了传统井控仿真系统中灵活性和并发性较差的问题,增强了井控仿真系统的综合训练能力。     

浅谈工程量清单模式下的合同签订

文章分析了工程量清单计价的费用组成,阐述了按照清单计价规范招投标的工程在合同签订时使用《合同示范文本》应注意的问题,并分析了合同履行过程中加强合同监督的必要性。     

双进双出钢球磨煤机的特性与故障处理

介绍双进双出钢球磨煤机双进双出、料位控制、辅助风系统和蒸汽惰性置换系统的特点，重点分析小齿轮断齿、大小齿轮齿面磨损点蚀严重、螺旋输煤绞笼损坏、磨煤机大瓦温度高、料位系统异常等常见故障及发生的原因，并提出相应设备和系统的改进措施。     

基于复数权值神经元的数字逻辑最稳健设计

复数权值神经元由于引入了多阈值逻辑而具有更强的性能,文中根据其数学模型,结合二进神经元稳健性的概念,提出了基于该神经元的稳健性定义.并结合定义,实现了基于单个神经元的基本数字逻辑以及异或运算的最稳健设计方案,从而证明了该稳健神经元实现任意数字逻辑的有效性和可行性,说明了其强大的处理能力.     

Non-invasive headspace measurement for characterizing oxygen-scavenging in polymers

A non-invasive headspace analysis method to measure rate and amount of oxygen uptake in oxygen-scavenging polymers is presented. Oxygen uptake data for metal-catalyzed poly(1,4-butadiene) at 30 °C are provided to illustrate the method. These data were obtained by measuring oxygen headspace concentration above the scavenging polymer with an OxySense^® 200T non-invasive oxygen sensor, and, for comparison, oxygen uptake was measured with an analytical balance. Excellent agreement was observed between these two independent experiments.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

加油站电气改造应重视的几个问题

由于加油站电气改造工程的质量对加油站的日常经营和安全管理有重大影响，针对改造中存在的一些共性问题，根据国家有关规范和标准，从电气改造工程的设计、配电系统、配电线路，以及防雷、防静电和防过电压等方面提出了要求和建议。     

机械过冷的制冷系统在汽车空调中的应用

由于很多汽车空调采用斜盘式压缩机，有利于采用机械过冷的制冷系统，来增加汽车空调的制冷量、提高制冷效率。本文的主要目的是通过对系统工质的流量分配、空调制冷量和性能系数(COP)与中间压力之间的变化关系的研究，来研究机械过冷在汽车空调中应用的可行性。