Moldless Printing of Silicone Lenses with Embedded Nanostructured Optical Filters

In this work, both light‐shaping and image magnification features are integrated into a single lens element using a moldless procedure that takes advantage of the physical and optical properties of mesoporous silicon (PSi) photonic crystal nanostructures. Casting of a liquid poly(dimethylsiloxane) pre‐polymer solution onto a PSi film generates a droplet with a contact angle that is readily controlled by the silicon nanostructure, and adhesion of the cured polymer to the PSi photonic crystal allows preparation of lightweight (10 mg) freestanding lenses (4.7 mm focal length) with an embedded optical component (e.g., optical rugate filter, resonant cavity, and distributed Bragg reflector). The fabrication process shows excellent reliability (yield 95%) and low cost and the lens is expected to have implications in a wide range of applications. As a proof‐of‐concept, using a single monolithic lens/filter element it is demonstrated: fluorescence imaging of isolated human cancer cells with rejection of the blue excitation light, through a lens that is self‐adhered to a commercial smartphone; shaping of the emission spectrum of a white light emitting diode to tune the color from red through blue; and selection of a narrow wavelength band (bandwidth 5 nm) from a fluorescent molecular probe.     

Waveguide microcavity based on photonic microstructures

A waveguide based microcavity exhibiting a quality factor Q/spl ap/2500 has been realized by incorporating a /spl lambda//4 phase shift into a 1-D photonic microstructure. The microstructure has an overall length of 3 /spl mu/m, consists of a deeply etched grating with very narrow (75 nm) air-gaps and exhibits a third-order stop band in the 800-900 nm wavelength regime. A comparison between measurement and simulation suggests that there is a thin (approximately 18 nm) skin of oxidized material at the etched semiconductor-air interfaces.     

Mode Selection for a Terahertz Gyrotron Based on a Pulse Magnet System

The TE_6,11 mode has been selected as a candidate for the second harmonic operation of a terahertz gyrotron at 1007.68 GHz. The predicted efficiency is 8.6 percent for the output power 0.38 kW. Time-dependent, multi-mode calculations have been carried out to investigate stability of a single-mode operation at second harmonic. It has been found that with the beam current 0.111 A and the magnetic field 19.282 T the second harmonic operation in the TE_6,11 mode is possible.     

Copper-induced changes in the properties of arsenic chalcogenides

The influence of the presence of Cu in the amount between 1% and 6% in arsenic chalcogenide glasses is examined through a study of the electronic energy levels by means of x-ray photoelectron and x-ray emission spectroscopy, through an investigation of the low-energy tunneling systems by means of phonon echoes at 0.37 K, and through an examination of the photodarkening and the photoinduced dichroism caused by polarized Ar⁺ laser irradiation. Possible links between the various effects are examined. The Cu atoms become an integral part of the amorphous lattice structure and strongly influence the photodarkening, but they do not have a significant effect on the tunneling systems or the dichroism. It is concluded that the tunneling levels and the dichroism involve only local configurations, while the photodarkening involves larger-scale areas of the lattice. Fiz. Tekh. Poluprovodn. 32, 976–981 (August 1998)     

Experiences with network-based user agents for mobile applications

Wireless networks are characterized by simple end devices and limited bandwidth. One solution to address these and other limitations of the wireless mobile environment that has been widely pursued is the placement of proxies, or agents, inside the network to assist with application processing that would normally take place on end devices. These agents can additionally manipulate data to reduce bandwidth requirements and assist in providing services. The design and implementation of a user agent is heavily impacted by the application it supports. In this paper we present our experiences with user agents in two different types of applications: telephony-based Personal Communication Services (PCS) and two-way messaging. To provide low latency service, the PCS user agents are mobile so that they may be kept close to their end devices. The design of the PCS agents limits migration overhead to the transfer of approximately 100 bytes of information in about 150 milliseconds. To provide advanced messaging services, the messaging user agent supports flexible messages while limiting air interface bandwidth usage. The messaging agents reduce uplink bandwidth usage by approximately 35% when applied to a cellular PCS system, and reduce message payloads by 97%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Maskless Preparation of Spatially-Resolved Plasmonic Nanoparticles on Polydimethylsiloxane via In Situ Fluoride-Assisted Synthesis

Here, a fluoride-assisted route for the controlled in-situ synthesis of metal nanoparticles (NPs) (i.e., AgNPs, AuNPs) on polydimethylsiloxane (PDMS) is reported. The size and coverage of the NPs on the PDMS surface are modulated with time and over space during the synthetic process, leveraging the improved yield (10×) and faster kinetics (100×) of NP formation in the presence of F⁻ ions, compared to fluoride-free approaches. This enables the maskless preparation of both linear and step gradients and patterns of NPs in 1D and 2D on the PDMS surface. As an application in flexible plasmonics/photonics, continuous and step-wise spatial modulations of the plasmonic features of PDMS slabs with 1D and 2D AgNP gradients on the surface are demonstrated. An excellent spatially resolved tuning of key optical parameters, namely, optical density from zero to 5 and extinction ratio up to 100 dB, is achieved with AgNP gradients prepared in AgF solution for 12 minutes; the performance are comparable to those of commercial dielectric/interference filters. When used as a rejection filter in optical fluorescence microscopy, the AgNP-PDMS slabs are able to reject the excitation laser at 405 nm and retain the green fluorescence of microbeads (100 µm) used as test cases.     

A VSWR-protected silicon bipolar RF power amplifier with soft-slope power control

This paper presents the design and measured performance of a 1.8-GHz power amplifier featuring load mismatch protection and soft-slope power control. Load-mismatch-induced breakdown can be avoided by attenuating the RF power to the final stage during overvoltage conditions. This was accomplished by means of a feedback control system, which detects the peak voltage at the output collector node and clamps its value to a given threshold by varying the circuit gain. The issue of output power control has been addressed as well. To this end, a temperature-compensated bias network is proposed, which allows a moderate power control slope (dB/V) to be achieved by varying the circuit quiescent current according to an exponential law. The nonlinear power amplifier was fabricated using a low-cost silicon bipolar process with a 6.4-V breakdown voltage. It delivers a 33.5-dBm saturated output power with 46% maximum power-added efficiency and 36-dB gain at a nominal 3.5-V supply voltage. The device is able to tolerate a 10:1 load standing-wave ratio up to a 5.1-V supply voltage. Power control slope is lower than 80 dB/V between -15 dBm and the saturated output power level.     

Effect of fat-enriched diets on rabbit meat fatty acid composition

The effects of beef tallow-, soya and sunflower olein- and soya bean oil-enriched (3%) diets on the chemical and fatty acid composition of total, a polar and polar lipids of rabbit meat have been studied. No significant differences (P > 0.05) in the meat chemical composition were observed between groups. However, a large effect of the diet on the total and apolar lipid fatty acids was found, with C18:1 and C18:2 the most affected fatty acids. The influence of the diets on the fatty acids of the polar fraction was less marked. It is concluded that the enrichment of the rabbit diet with either soya and sunflower oleins or soya bean oil allows the production of rabbit meat with a higher unsaturation degree than is obtained by using conventional diets, which constitutes an important nutritional benefit to the human being.     

Generation of random variables for modelling VBR multimedia sources

The design and performance evaluation of multimedia systems require the availability of adequate models to mimic the statistical properties of the traffic generated by a multimedia source. In this paper the authors propose a very simple method for the generation of discretetime and discretestate autocorrelated random variables which can be used to model a traffic source by simulation. The probability distribution and autocorrelation sequence of the variables generated exactly match the corresponding experimental histograms of the source to be modelled when the experimental autocorrelation sequence is decreasing with downward convexity. In this paper an analytical demonstration of the method proposed is given and its use is illustrated by three telecommunications examples.