Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

Verification of submodeling technique in thermomechanical reliability assessment of flip-chip package assembly

In this paper we verified the submodeling technique applied in the thermomechanical reliability assessment of a flip-chip BGA under accelerated thermal cycling test conditions. Since the steady-state creep model was implemented for the solder bump to better represent its realistic mechanical behavior, submodeling procedures developed specifically for path-dependent thermomechanical problems were considered. A detailed global model for the flip-chip BGA was built up to verify submodeling solutions. This model also served as a benchmark to examine solution discrepancies caused by different simplifications of the global model.     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

Interleukin-2 enhancement of cytotoxicity by humanized monoclonal antibody M195 (anti-CD33) in myelogenous leukemia

The mass childhood immunization programme has traditionally been viewed as a safe and effective preventative measure by health promoters, primary health care professionals and governments. This consensus has meant that immunization has rarely been viewed as ethically problematic. A number of recent changes in the context of the delivery of health care, particularly the emphasis on consumerism and the effect of the marketization of services, makes timely an examination of ethical, social and political issues. This article examines four main grounds for problematizing the mass childhood immunization programme. These are: clinical research evidence about the safety and efficacy of vaccines; the masking of wider social and political determinants of ill health; the contradictory strictures about collective and individual rights in relation to immunization; and the uniqueness of childhood immunization as a physical intrusion into a healthy body. The implications of these ethical issues are discussed in relation to informed consent and the need for a 'greenfield' review that includes the views of dissenting parents, lawyers and moral philosophers, as well as health professionals.     

Role of vagus nerves in resiniferatoxin-induced bronchoconstriction of guinea pigs

To study the role of vagal afferent C-fibers in resiniferatoxin (RTX)-induced bronchoconstriction in vivo, 30 guinea pigs weighing 347 +/- 28 g were evenly and randomly divided into five groups: Group 1, control; 2, chronic vagotomy; 3, local capsaicin (acute); 4, local capsaicin (chronic); and 5, systemic capsaicin. Each animal was anesthetized with pentobarbital sodium, cannulated with a tracheal cannula and venous catheter, paralyzed with gallamine triethiodide, and artificially ventilated. All animals were pretreated with atropine and phenoxybenzamine. Immediately after RTX was intravenously injected, each animal in the control group exhibited profound decreases in maximal expiratory flow, dynamic respiratory compliance, and total lung capacity, as well as an increase in functional residual capacity, indicating severe airway constriction. Animals in Groups 2-4 exhibited partial abolishment, while those in Group 5 showed complete abolishment of the RTX-induced bronchoconstriction. In 12 additional animals (6 animals each in control and chronic vagotomy groups), chronic vagotomy caused also suppressive effects on capsaicin-induced airway constriction. At one min, our data demonstrate that 36-51% of noncholinergic bronchoconstriction is due to the vagal component while the remaining constriction is due to the nonvagal component. Thus, the nonvagal component plays a significant role in this type of tachykinin-mediated airway constriction.     

ETR Ⅱ-30调速器液压控制系统

ETRⅠ-30调速器是瑞士爱舍维斯工厂生产的具有PID调节规律的电液调速器。本文对其液压控制系统作了较详细的介绍,供有关人员参考。     

Application of evolutionary programming to transient andsubtransient parameter estimation

This paper presents an artificial intelligence approach of using evolutionary programming to estimate the transient and subtransient parameters of a generator under normal operation. The estimation using evolutionary programming is compared with that using a corrected extended Kalman filter. The comparisons with both simulation and micromachine test results show that evolutionary programming is robust to search the real values of parameters even when the data are highly contaminated by noise, while with the extended Kalman filter, the estimation tends to diverge with such data     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.