Procedure for predicting settlements of thawing bases for engineering calculations

It was shown that in order to compute the settlement of thawing cohesive soil under a load in time it is necessary to experimentally determine the consolidation coefficient. A procedure is suggested for determining this coefficient, as well as use of the classical solution of a differential equation for seepage consolidation to describe the settlement of soil, thawing of which can occur according to any law.State All-Union Scientific Research Institute of Roads. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 5–7, July–August, 1993.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Continuous monitoring of short term dissolved oxygen and algal dynamics

Dissolved oxygen (DO) in coastal bays with frequent algal blooms can undergo significant diurnal changes. Short-term DO and algal dynamics in a sub-tropical, nitrogen-limited, marine ecosystem are studied by means of a specially designed telemetry system. The high resolution data show clearly the importance of the vertical DO structure, and its relationship with environmental variables (solar radiation, water temperature, wind, tidal current) and phytoplankton dynamics. The design, instrumentation and calibration, and operational experience of the system are described. The simple and robust system has proved useful in (i) providing continuous data for full testing of water quality models, and (ii) the planning of field experiments to study algal dynamics.     

Concurrent denitrification and oxygen uptake in microbial films

Mixed microbial films were grown on the inner walls of a tubular reactor with recirculation of the reactor contents and continuous flow-through of nutrient solution. The loss of total oxidized nitrogen was correlated to the film population, the nitrite concentration and the dissolved oxygen concentration in the reactor. When film population was greater than 0.5 × 10⁹ cells cm⁻², reactor dissolved oxygen concentration greater than 1 mg l⁻¹ had little effect on the nitrate loss. Nitrate loss declined for film populations greater than 2 × 10⁹ cells cm⁻². Models based on Monod and zero-order microbial kinetics were calibrated using these data and a nonlinear least squares method. There was little difference in the residual errors with these methods.     

Tunnelling projects in Southern Africa

Until some thirty years ago tunnelling in southern Africa for civil engineering purposes had been on a relatively small scale and of a sporadic nature. The first major tunnel to be built in the region was the 82 km long Orange-Fish Tunnel. Since 1970 more than 175 tunnels with an aggregate length of just over 400 km have been built. Much of the first phase of the Lesotho Highlands Water Project, which will have more than 100 km of tunnels, is about to be completed. The last thirty years represent the busiest period of tunnelling by civil engineers that southern Africa has ever known. The paper starts by summarising the early history of tunnelling in the region, and goes onto describe recent and current tunnelling projects. It also gives an indication of the possible demand for tunnels in the future.     

A research about a method for restoration of traditional lime mortars and plasters: A staging system approach

Turkey is quite rich with historical buildings. Depending on various factors like time, increasing air pollution due to technological improvements of the present era together with insufficiency of inspection leads to the formation of damages on these buildings which are part of our historical heritage. Conservation of such buildings which are as important as historical documents should be the first and foremost target of any project. Where maintenance is insufficient, conservation and restoration attempts should replace it. What is necessary in restoration is the use of material which resembles the original material to the closest degree or, producing appropriate material which is compatible with the properties of the original material. The first dimension of the current problem is the insufficiency of resources while the second dimension stems from the lack of proper evaluation of the material to be used in conservation and restoration. This study defines the importance of mortars and plasters along with their history and the reasons of deterioration. In addition, it sets up the information flow of mortar and plaster within a systematic decision making process. The necessary experimental methods for the production of new repair mortar or plaster that can be used in determining the character analysis of original mortar and deterioration morphology are also analyzed. Thus, a method that can be used in the conservation and restoration studies is determined with this paper.     

Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems

This paper describes a new test to determine flexibility of beam-to-column connectors used in conventional pallet racking systems. In this study, two different ways were used to find the flexibility of a connector. The connector developed was tested using the conventional cantilever method [Bajoria, KM. Three dimensional progressive collapse of warehouse racking, PhD Thesis, University of Cambridge, UK 1986], and then also using a newly proposed double cantilever method. To verify the results obtained from both the tests, a full scale frame test was carried out. In the double cantilever test the connector is subjected to three types of forces namely moment, shear and the axial pull by the beams, thereby giving behavior close to practical usage of connectors. Non-linear finite element analysis of both the tests and also of the full scale test were carried out using ANSYS [ANSYS 7.0—User's Manual, ANSYS Inc., 2005] software. The results obtained from the double cantilever test were found to match well with the full scale frame test. The experimental results and the finite element results are compared in this paper.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Spatial and temporal evolution of trihalomethanes in three water distribution systems

Spatial and seasonal changes in trihalomethane (THM) concentrations were investigated in three distribution systems of Quebec (Canada) which are supplied by different surface waters and which use a variety of physicochemical treatment strategies. The investigation was based on an intensive 25-week sampling programme, undertaken at a time of year when the temperature of southern Quebec surface waters exceeds 4 degrees C (April-November). THMs and other water quality and operational parameters were monitored at points along the distribution system--between the treatment plant and the system extremities--which represented variable residence times of water. Results showed that THM concentrations vary significantly (from 1.5 to 2 times, depending on the utility) between finished waters as they leave the plant and water at the system extremities. When water temperature exceeds 15 degrees C, spatial THM variations are particularly high (from 2 to 4 times, depending on the utility). The development of multivariate regression models showed that water temperature was a better predictor of THM seasonal variability than chlorine dose, surrogates of natural organic matter and pH. Also, initial THM formation (in finished waters leaving the plant) was a good predictor of THM levels at distribution system extremities.