A construction of codes with exponential error bounds on arbitrarydiscrete memoryless channels

This correspondence proposes an explicit construction of codes achieving capacity for arbitrary discrete memoryless channels. The proposed code is obtained by concatenating variable inner codes and an algebraic geometry code. Further, we clarify that the proposed code achieves the error exponent obtained by Forney for concatenated codes     

Characterisation and modelling of VBR video traffic

The impact of VBR video traffic characteristics on broadband network performance is analysed. In particular, the authors compare in a queue the behaviour of several models that adjust different statistical parameters of actual MPEG traces. It is proved that a good fit of the probability density function (PDF) is essential to approximate queuing behaviour while the effects of short range dependence (SRD) are of secondary importance and those of long range dependence (LRD) could be neglected for practical purposes if realistic scenarios, with strict QoS requirements, are considered     

Reactions and early-age properties inin-situ polymerized gypsum-acryl amide composites

The development of the reactions and early-age properties of a system consisting of calcium sulfate hemihydrate and acrylamide monomer was studied. The hydration of the hemi-hydrate and the polymerization of the acrylamide were determined at various time intervals, and the expansion and rise in temperature were continuously recorded. Setting times and flow were determined using standard test methods. It was shown that acrylamide and hemi-hydrate could react simultaneously to form gypsum and polyacrylamide composite in which the reactions to form both components advanced almost until completion, for mixes containing up to 10% acrylamide. Increase in the content of acrylamide improved the flow properties of the mix, but delayed the setting. At contents of 2% acrylamide, the hemi-hydrate reaction occurred prior to the polymerization process. Above 6% acrylamide, the polymerization reaction preceded the hemi-hydrate reaction. This sequence of reactions can account for the observations that above 6% acrylamide two peaks in the heat liberation curves could be detected as well as that expansion was smaller at the higher acrylamide content, due probably to separation between gypsum crystals forming when the polymer is already present.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.     

Main flux saturation modelling in double-cage and deep-barinduction machines

The available models of saturated double-cage and deep-bar induction machines are the current state-space model and the flux state-space model, where state-space variables are selected either as stator current and currents of both rotor cages, or stator flux linkage and flux linkages of both rotor cages. This paper presents a number of models of saturated double-cage (deep-bar) induction machines where alternative sets of state-spate variables are selected. The method of main flux saturation modelling relies on recently introduced concept of `generalised flux space vector', which has originally been developed for modelling of saturated single-cage induction machines. The procedure and the novel models are verified by experimental study and simulation of self-excitation process in a double-cage induction generator     

High-stability current control in the 10 A range

This paper reports on the design and evaluation of a high-stability current control developed for energizing the C-field magnet of the high-field cesium standard experiment, currently in progress at the Politecnico di Torino. This source must supply about 0.8 kW dc power with a current stability in the 10^-7 range for more than 1 h     

The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation

Modification of the eutectic Si in Al-Si foundry alloys by adding strontium or sodium is, unfortunately, accompanied by an increase of porosity in the casting. In an attempt to understand the nature of this problem, this study used a sessile-drop method to investigate the effect of Sr and Na on surface tension and volumetric shrinkage, two probable causes of porosity occur-rence. The addition of 0.01 wt pct Sr and 0.005 wt pct Na to A356 alloy decreases the surface tension of the liquid by about 19 and 10 pct, respectively, and may increase the volume shrink-age by about 12 pct. These changes to surface tension and volumetric shrinkage promote the early formation of the pores during solidification and give the availability of a longer period of growth prior to complete solidification, resulting in a larger pore size. The effect of surface tension on the pores is more significant than volumetric shrinkage. Although the predicted pore diameter increases with lower surface tension or higher volumetric shrinkage, these two effects alone do not seem able to completely account for the observed increase in porosity that is associated with modification.     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated