Stability analysis and design of stabilization measures for Chenab railway bridge rock slopes

Bulletin of Engineering Geology and the Environment - This article presents the challenges encountered during the stability analysis and stabilization of two Himalayan rock slopes supporting the...     

Security Scheme in Cloud System Using Hyper Elliptic Curve and SIFT Technique with QR Code

Wireless Personal Communications - When concerned about cloud the security has to be the major factor considered by providers of service. Double encryption is a tool used by the storage server to...     

Synthesis, characterization and optical properties of Mg(OH)2 micro-/nanostructure and its conversion to MgO

Magnesium hydroxide (Mg(OH)₂) micro- and nanostructures have been synthesized by a single step hydrothermal route. Surface morphology analysis reveals the formation of micro- and nanostructures with varying shape and size at different synthesis conditions. Structural investigations by X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirm that the synthesized material is Mg(OH)₂ with hexagonal crystal structure. An optical band gap of 5.7 eV is determined for Mg(OH)₂ nanodisks from the UV–vis absorption spectrum. A broad emission band with maximum intensity at around 400 nm is observed in the photoluminescence (PL) spectra of Mg(OH)₂ nanodisks at room temperature depicting the violet emission, which can be attributed to the ionized oxygen vacancies in the material. Furthermore, Mg(OH)₂ has been converted to MgO by calcination at 450 °C. Optical studies of the MgO nanodisks have shown an optical band gap of 3.43 eV and a broadband PL emission in the UV region. Mg(OH)₂ and MgO nanostructures with wide-band gap and short-wavelength luminescence emission can serve as a better luminescent material for photonic applications.     

Effect of Surfactants on the Structure and Morphology of Magnesium Borate Hydroxide Nanowhiskers Synthesized by Hydrothermal Route

Magnesium borate hydroxide (MBH) nanowhiskers were synthesized using a one step hydrothermal process with different surfactants. The effect surfactants have on the structure and morphology of the MBH nanowhiskers has been investigated. The X-ray diffraction profile confirms that the as-synthesized material is of single phase, monoclinic MgBO₂(OH). The variations in the size and shape of the different MBH nanowhiskers have been discussed based on the surface morphology analysis. The annealing of MBH nanowhiskers at 500 °C for 4 h has significant effect on the crystal structure and surface morphology. The UV–vis absorption spectra of the MBH nanowhiskers synthesized with and without surfactants show enhanced absorption in the low-wavelength region, and their optical band gaps were estimated from the optical band edge plots. The photoluminescence spectra of the MBH nanowhiskers produced with and without surfactants show broad emission band with the peak maximum at around 400 nm, which confirms the dominant contribution from the surface defect states.     

Effect of Nitrogen Doping on the Electrical Properties of 3C-SiC Thin Films for High-Temperature Sensors Applications

3C-SiC is a promising structural material for piezoresistive sensors used in high-temperature applications.For sensor development,the preparation of sensor materials and study of its electrical properties,such as resistivity,barrier height of grain boundaries,and temperature coefficient of resistivity,are important in addition to structural properties and these have to be optimized.In the present work,3C-SiC thin film with in situ doping of nitrogen is prepared through lowpressure chemical vapor deposition by using methyl trichloro silane,ammonia,and hydrogen as precursors.Electrical properties of deposited 3C-SiC thin films with varying nitrogen doping concentration through four probe technique are studied.Atomic force microscopy investigations are carried out to study the grain size on and average root-mean-squared roughness 3C-SiC thin films.A decrease in the degree of crystallinity is observed in nitrogen-doped 3C-SiC thin films.The sheet resistivity of nitrogen-doped 3C-SiC thin film is found to decrease with increase in temperature in the range from 303to 823 K.The sheet resistivity,average temperature coefficient of resistance,and barrier height of the grain boundaries of film doped with 17 at.%of nitrogen are 0.14 Ω cm,—1.0 ×10~(-4)/K,and 0.01 eV,respectively.Comparing all the nitrogen-doped 3C-SiC thin films,the film doped with 17 at.%of nitrogen exhibits an improved structural and electrical properties and it can be used as sensing material for high-temperature applications.     

Electrochemical behaviour of metal hexacyanoferrate converted to metal hydroxide films immobilized on indium tin oxide electrodes—Catalytic ability towards alcohol oxidation in alkaline medium

In this work, we demonstrate a simple method to modify indium tin oxide (ITO) electrodes in order to perform electro-catalytic oxidation of alcohols in alkaline medium. Metal hexacyanoferrate (MHCF) films such as nickel hexacyanoferrate (NiHCF) and copper hexacyanoferrate (CuHCF) were successfully immobilized on ITO electrodes using an electrochemical method. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize the structural and morphological aspects of MHCF films. Cyclic voltammetry (CV) was used to study the redox properties and to determine the surface coverage of these films on ITO electrodes. Electrochemical potential cycling was carried out in alkaline medium in order to alter the chemical structure of these films and convert to their corresponding metal hydroxide films. SEM and XPS were performed to analyze the structure and morphology of metal hydroxide modified electrodes. Electro-catalytic oxidation ability of these films towards methanol and ethanol in alkaline medium was investigated using CV. From these studies we found that metal hydroxide modified electrodes show a better catalytic performance and good stability for methanol oxidation along with the alleviation of CO poisoning effect. We have obtained an anodic oxidation current density of ∼82 mA cm⁻² for methanol oxidation, which is at least 10 fold higher than that of any metal hydroxide modified electrodes reported till date. The onset potential for methanol oxidation is lowered by ∼200 mV compared to other chemically modified electrodes reported. A plausible mechanism was proposed for the alcohol oxidation based on the redox properties of these modified electrodes. The methodology adapted in this work does not contain costlier noble metals like platinum and ruthenium and is economically viable.     

The functional properties of popped, flaked, extruded and roller-dried foxtail millet (Setaria italica)

Foxtail millet grains were decorticated in rice‐milling machinery and the decorticated millet was processed to prepare flaked, extrusion cooked and roller‐dried products, whereas the native grains were subjected to high‐temperature, short‐time treatment to prepare popped millet. The nutrient composition and some of the functional properties of the products were determined, principally solubility and swelling power in water, oil absorption capacity and pasting characteristics. Carbohydrate and lipid profiles of the products were also studied. The changes in the starch granular structure caused by heat treatment were examined by scanning electron microscopy. The degree of starch gelatinization was highest in the case of roller‐dried millet followed by popped, flaked and extruded products. It was concluded that the cereal processing technologies that were investigated could be successfully applied to foxtail millet to prepare ready‐to‐eat or use products, thereby increasing its utilization as a food.     

Effect of iodine incorporation on the electrical properties of amorphous conducting carbon films

In this work, the influence of iodine incorporation on the electrical properties of amorphous conducting carbon films, prepared by the vapor phase pyrolysis of maleic anhydride, is reported and discussed. X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies reveal structural changes in the system. The anomalous behavior in the electrical properties of the intercalated system at low temperatures is investigated. The system shows a positive temperature coefficient of resistance (TCR) at low temperatures, which suggests reasons for the induced ordering of the system at low temperatures with the iodine incorporation. Also, a systematic increase in the conductivity of the sample is observed. The crossover temperature depends on the disorder in the system. The results indicate the possibility of metal-insulator (M-I) transition as a function of preparation temperature, iodine concentration and magnetic field.     

Synthesis, characterization and fabrication of solar cells making use of [Ru(dcbpy)(tptz)X]X (where X = Cl, SCN, CN) complexes

Dye-sensitized TiO₂ solar cells were fabricated using tridentate ligand ruthenium(II) complexes, [Ru(dcbpy)(tptz)X]X (where dcbpy = 4,4′-dicarboxy-2,2′-bipyridine, tptz = 2,4,6-Tris(2-pyridyl)-s-triazine and X = Cl⁻, SCN⁻, CN⁻) attached to sol–gel processed TiO₂ electrodes. The ligand tptz functions as spectator ligand and dcbpy functions as the anchoring ligand with sufficient visible light absorption. The synthesized complexes were characterized before using them in solar cells. The functioning of the solar cells fabricated using different conducting glasses was monitored and the current–voltage characteristics were measured. The efficiencies of different cells were calculated and compared.     

Effect of reinforcement form on the bearing capacity of square footings on sand

This paper presents the results of laboratory model loading tests and numerical studies carried out on square footings supported on geosynthetic reinforced sand beds. The relative performance of different forms of geosynthetic reinforcement (i.e. geocell, planar layers and randomly distributed mesh elements) in foundation beds is compared; using same quantity of reinforcement in each test. A biaxial geogrid and a geonet are used for reinforcing the sand beds. Geonet is used in two forms of reinforcement, viz. planar layers and geocell, while the biaxial geogrid was used in three forms of reinforcement, viz. planar layers, geocell and randomly distributed mesh elements. Laboratory load tests on unreinforced and reinforced footings are simulated in a numerical model and the results are analyzed to understand the distribution of displacements and stresses below the footing better. Both the experimental and numerical studies demonstrated that the geocell is the most advantageous form of soil reinforcement technique of those investigated, provided there is no rupture of the material during loading. Geogrid used in the form of randomly distributed mesh elements is found to be inferior to the other two forms. Some significant observations on the difference in reinforcement mechanism for different forms of reinforcement are presented in this paper.