Simulation of transient process in melting section of reciprocating extruder

Plastic injection molding machine that can be classified as reciprocating extruders are among the most widely used machines in industry. However, most studies in the injector design were based on steady state models developed for extruders that involved no reciprocation. This over-simplified model leaves out the most important aspect of reciprocation. The authors of this paper have derived a transient melting model that takes care of the change from the conventional steady extrusion to that of a discontinuous transient process. This paper describes simulations conducted on the derived model to explain observation that cannot be explained by the steady extrusion model in practical experiments. The simulation was conducted by using parameters given in Donovan's experiment [Polym Engng, 11 (1971) 353]. The simulation results are found to qualitatively match with the experimental results. It proves the validity of the model. Simulation has also been conducted with the model on materials that their viscosities are temperature and shear rate dependent. The result has shown that screw rotation speed, screw axial movement speed, barrel thickness, barrel heat capacity, temperature of heater and polymer are factors affecting the melting speed and the transient effects.     

Synthesis of novel tri- and tetrasubstituted C<Subscript>18</Subscript> furan fatty esters

A methylene-interrupted C₁₈ keto-acetylenic fatty ester (methyl 12-oxo-9-octadecynoate) was obtained from methyl ricinoleate by bromination-dehydrobromination followed by oxidation. Reaction of methyl 12-oxo-9-octadecynoate with bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide furnished methyl 8-[5-hexyl-3-allyl-furan-2-yl]-octanoate (1, 56%) or methyl 8-[5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (2, 55%). Reaction of methyl 12-oxo-11-chloro-or 11-fluoro-9-octadeyynoate (prepared from methyl santalbate-methyl 11-E-9-octadecynoate, found in sandalwood, Santalum album, seed oil) with bis(benzonitrile) palladium(II) chloride gave methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (3, 50%) or methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (4, 50%), respectively. And when methyl 12-oxo-11-chloro- or 11-fluoro-9-octadecynoate was treated with a mixture of bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide, the reaction yielded tetrasubstituted C₁₈ furan derivatives, viz, methyl 8-(3-allyl-4-chloro-5-hexyl-furan-2-yl)-octanoate (5, 54%), methyl 8-[4-chloro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl)-octanoate (6, 54%), methyl 8-(3-allyl-4-fluoro-5-hexyl-furan-2-yl]-octanoate (7, 10%), and methyl 8-[4-fluoro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (8, 10%). The presence of a fluorine atom in the furan derivatives 4, 7, and 8 was readily characterized by the appearance of doublets for carbon nuclei, which were coupled to the fluorine atom in the ¹³C NMR spectra. All furan fatty derivatives from this work were characterized by NMR spectroscopic and mass spectrometric analyses. The yields of compounds 7 and 8 were very low (10%) despite attempts to improve the procedure by increasing the amounts of the reactants and catalyst.     

Ölveredelung: Produkt-, Energie-, Prozeß- und Umweltdaten,Ergebnisse von Großanlagen

Oil Refining: Data on Product, Energy, Process, Environmental Pollution, and Processing Data from Large Technical Plants The need to develope new methods for processing new raw materials, meeting wider market demands, conserving energy and providing environmental protection is discussed. Physical refinement provides the means to accomplish these ends, as well as being the only practical way to overcome certain new problems such as contamination with pesticides. Modern steam distillation equipment is flexible enough to handle a wide range of energy usage, recovering the fatty acids in a directly useable form without use of lye and soapstock splitting, and with very low oil losses. Data is provided to show the extreme economy of one particular method versus other physical refining equipment, and to give information on the product quality. A formula is presented to prove the reality of the low stripping steam usage achieved in practice.     

Mass spectrometric immunoassay and MRM as targeted MS-based quantitative approaches in biomarker development: Potential applications to cardiovascular disease and diabetes

Type 2 diabetes mellitus (T2DM) is an important risk factor for cardiovascular disease (CVD)—the leading cause of death in the United States. Yet not all subjects with T2DM are at equal risk for CVD complications; the challenge lies in identifying those at greatest risk. Therapies directed toward treating conventional risk factors have failed to significantly reduce this residual risk in T2DM patients. Thus newer targets and markers are needed for the development and testing of novel therapies. Herein we review two complementary MS-based approaches—mass spectrometric immunoassay (MSIA) and MS/MS as MRM—for the analysis of plasma proteins and PTMs of relevance to T2DM and CVD. Together, these complementary approaches allow for high-throughput monitoring of many PTMs and the absolute quantification of proteins near the low picomolar range. In this review article, we discuss the clinical relevance of the high density lipoprotein (HDL) proteome and Apolipoprotein A-I PTMs to T2DM and CVD as well as provide illustrative MSIA and MRM data on HDL proteins from T2DM patients to provide examples of how these MS approaches can be applied to gain new insight regarding cardiovascular risk factors. Also discussed are the reproducibility, interpretation, and limitations of each technique with an emphasis on their capacities to facilitate the translation of new biomarkers into clinical practice.     

Bithalamic hyperintensity on T2-weighted MR: vascular causes and evaluation with MR angiography

PURPOSE: To determine whether MR angiography can be used to differentiate between the two vascular causes of bithalamic hyperintensity on T2-weighted MR images: "top of the basilar" artery occlusion and deep cerebral vein thrombosis. METHODS: A retrospective review identified six patients with bithalamic T2 hyperintensity of vascular causes. MR angiography was performed in four patients, MR angiography and conventional angiography in one patient, and conventional angiography in one patient. Data pertaining to clinical presentation and hospital course were collected. MR angiographic techniques were multislab overlapping three-dimensional time-of-flight, 2-D time-of-flight, and 2-D phase-contrast. RESULTS: Three cases of top of the basilar artery occlusion and three cases of deep cerebral vein thrombosis were recognized. In all cases, T2 hyperintensity in a vascular distribution suggested cerebral occlusive disease. Infarction involving the thalami and basal ganglia was present in two cases of deep cerebral vein thrombosis. Infarction of the thalami, mesodiencephalic region, and cerebellar hemispheres was present in two cases of basilar artery occlusion. Bithalamic infarction alone was seen in one case of deep cerebral vein thrombosis and one case of basilar artery occlusion. In the five cases in which MR angiography was used, this technique accurately distinguished the vessels involved (arterial or venous). CONCLUSION: MR angiography is a useful adjunct to MR imaging in the evaluation of bithalamic T2 hyperintensity. It does help distinguish between the two vascular causes: top of basilar artery occlusion and deep cerebral vein thrombosis.     

Laser-Printed Plasmonic Metasurface Supporting Bound States in the Continuum Enhances and Shapes Infrared Spontaneous Emission of Coupled HgTe Quantum Dots

In order to advance the development of quantum emitter-based devices, it is essential to enhance light-matter interactions through coupling between semiconductor quantum dots with high quality factor resonators. Here, efficient tuning of the emission properties of HgTe quantum dots in the infrared spectral region is demonstrated by coupling them to a plasmonic metasurface that supports bound states in the continuum. The plasmonic metasurface, composed of an array of gold nanobumps, is fabricated using single-step direct laser printing, opening up new opportunities for creating exclusive 3D plasmonic nanostructures and advanced photonic devices in the infrared region. A 12-fold enhancement of the photoluminescence in the 900–1700 nm range is observed under optimal coupling conditions. By tuning the geometry of the plasmonic arrays, controllable shaping of the emission spectra is achieved, selectively enhancing specific wavelength ranges across the emission spectrum. The observed enhancement and shaping of the emission are attributed to the Purcell effect, as corroborated by systematic measurements of radiative lifetimes and optical simulations based on the numerical solution of Maxwell's equations. Moreover, coupling of the HgTe photoluminescence to high quality factor modes of the metasurface improves emission directivity, concentrating output within an ≈20° angle.     

An integrated dual sensor system automatically optimized by target rate histogram

The use of combined sensors and advanced algorithms using different principles can improve rate performance over a single sensor system. Combinations of sensors and more sophisticated algorithms, however, invariably increase the complexity of pacemaker programming. An automatically optimized combined minute ventilation and activity DDDR pacemaker was developed to minimize repeated sensor adjustment. The device used subthreshold (below cardiac stimulation threshold) lead impedance to detect lead configuration at implantation automatically, followed by "implant management," including setting of lead polarity and initiation of DDDR pacing. Automatic sensor adaptation was achieved by programming a "target rate histogram" based on the patient's activity level and frequency of exertion, and the rate profile optimization process matched the recorded integrated sensor response to the target rate histogram profile. In nine patients implanted with the DX2 pacemakers, the implant management gave 100% accuracy in the detection of lead polarity. Rate profile optimization automatically increased the pacing rate during exercise between discharge and 3-month follow-up (hall walk: 78 +/- 3 vs 98 +/- 3 beats/min, and maximal treadmill exercise: 89 +/- 6 vs 115 +/- 5 beats/min, P < 0.001) with a significant increase in exercise duration during maximal exercise (7.18 +/- 1 min vs 9.56 +/- 2 min, P = 0.05). The accuracy of rate profile optimization versus manual programming was assessed at 1 month, and there was no significant difference between pacing rate kinetics and maximal pacing rate between the two methods of programming. In conclusion, pacemaker automaticity can be initiated at implantation and the self-optimized rate adaptive response appeared to be comparable to that derived from a manual programming procedure, which may reduce the need to perform time consuming sensor programming.     

An economical piezoelectric phase modulator for fiber optic sensors

A homemade piezoelectric phase modulator for interfero-metric fiber optic sensors was fabricated using piezoelectric buzzers as strain elements. Six piezoelectric elements were embedded between the two halves of a bakelite cylinder split along its axis and secured tightly together again to form a cylinder. Single-mode optical fiber was then wound around the cylinder to complete the unit. Up to a frequency of 500 Hz, the phase shift produced by the modulator is linearly proportional to the amplitude of the applied voltage. The sensitivity of the phase modulator is about 3.6 rad/V and has a dynamic range of 1,000 rad, which is sufficient for most phase modulation purposes.     

A job grouping approach for planning container transfers at automated seaport container terminals

This paper proposes a practical job grouping approach, which aims to enhance the time related performance metrics of container transfers in the Patrick AutoStrad container terminal, located in Brisbane, Australia. It first formulates a mathematical model of the automated container transfers in a relatively complex environment. Apart from the consideration on collision avoidance of a fleet of large vehicles in a confined area, it also deals with many other difficult practical challenges such as the presence of multiple levels of container stacking and sequencing, variable container orientations, and vehicular dynamics that require finite acceleration and deceleration times. The proposed job grouping approach aims to improve the makespan of the schedule for yard jobs, while reducing straddle carrier waiting time by grouping jobs using a guiding function. The performance of the current sequential job allocation method and the proposed job grouping approach are evaluated and compared statistically using a pooled t-test for 30 randomly generated yard configurations. The experimental results show that the job grouping approach can effectively improve the schedule makespan and reduce the total straddle carrier waiting time.