Iron Particles Coated with Alumina: Synthesis by a Mechanofusion Process and Study of the High-Temperature Oxidation Resistance

The mechanofusion process, a dry particle coating route, has been successfully applied to coat iron particles with alumina. The high-temperature oxidation resistance of Fe and coated Fe particles has been comparatively investigated in air in the temperature range 350°–900°C. The activation energy calculations demonstrate that, in the temperature range 350°–420°C, the oxidation mechanisms are the same for both particles. Scanning electron microscopy and energy-dispersive spectroscopy analyses show that oxidation products are mainly formed at the iron/alumina interface at low temperatures or at the alumina/gas interface at high temperatures. It is shown that, depending on the temperature range, two different oxidation mechanisms are predominant.     

Fabrication and Room-Temperature Single-Charging Behavior of Self-Aligned Single-Dot Memory Devices

Self-aligned single-dot memory devices and arrays were fabricated based on arsenic-assisted etching and oxidation effects. The resulting device has a floating gate of about 5-10 nm, presenting single-electron memory operation at room temperature. In order to realize the final single-electron memory circuit, this paper investigates process repeatability, device uniformity in single-dot memory arrays, device scalability, and process transferability to an industrial application     

Index of critical points in rational l-approximation

This article is concerned with the l²-approximation of a given transfer function f by a rational one whose order is prescribed. We show that the sum of the indices of the critical points of the criterion is generically equal to 1, and in particular does not depend on f.     

A matrix-based approach to properness and inversion problems for rational surfaces

We present a matrix-based approach for deciding if the parameterization of an algebraic space surface is invertible or not, and for computing the inverse of the parametrization if it exists.     

Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films

An optical nondestructive strain measurement technique was performed to analyze the mechanical deformation induced by an electrical field within the insulating materials. Poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films were then subjected to constant electrical fields right up to their electrical breakdown. The experimental technique made it possible to follow the various stages of the mechanical behavior of PEN in real time. The final breakdown occurred in the observation zone and the related mechanical deformation was captured. A “margarita” structure was observed with a hole at the center. The experimental results indicated that the level of the induced‐mechanical deformations depended on the local environment. We defined two different zones representing the inside and the outside of the damaged area. The induced‐deformations were larger in the damaged zone. It was also observed that deformations increased when the sample had a lower degree of crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Echinococcal disease and the provision of humanitarian surgical aid in Bosnia

The Canadian Armed Forced have been deployed to the republics of the former Yugoslavia since 1992 as part of the United Nations Protection Force and the NATO-led Implementation Force. Most of the combat arms units have been supported by small, self-contained surgical teams for essential surgery. Considerable benefit is gained by cooperating with civilian surgeons. The experience of treating five patients with complicated hydatid disease endemic to the area is examined. Treatment of these patients requires performing major surgical procedures under austere conditions and must be undertaken with care. Careful selection and communication with the surgical nursing team and civilian surgeons is essential. Well selected cases can also pay tremendous dividends in terms of maintaining the skills of personnel who must be prepared for any emergency in addition to providing vital surgical assistance to these patients.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.