AN EXPERIMENTAL STUDY OF METHANE OXIDATIVE COUPLING IN FIXED BED REACTORS WITH A DISTRIBUTED OXYGEN FEED

Methane oxidative coupling has been carried out in a reactor with a distributed oxygen feed. The system consists of a catalytic bed of Li/MgO in a quartz reactor with one inlet for methane and one or more inlets for oxygen. To enable the comparison between the co-fed mode and the distributed feed mode, an especial experimental design was used in order to maintain the same contact time in the co-fed and in the distributed feed modes, and in order to minimize the temperature gradients caused by the exothermic oxidation process. The results clearly show that a distributed oxygen feed may give rise to significant increases in the hydrocarbon selectivity obtained at a given methane conversion,     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

Perfectly Wetting Mixtures of Surfactants from Renewable Resources: The Interaction and Synergistic Effects on Adsorption and Micellization

This paper presents a study of the surface properties of mixtures of surfactants originating from renewable sources, i.e., alkylpolyglucoside (APG), ethoxylated fatty alcohol (AE), and sodium soap (Na soap). The main objective was to optimize the surfactant ratio which produces the highest wetting properties during the analysis of the solution of the individual surfactants, two- and three-component mixtures, and at different pH values. The results showed the existence of a synergistic effect in lowering the interfacial tension, critical micelle concentration and the formation of mixed micelles in selected solutions. We found that best wetting properties were measured for the binary AE:APG mixtures. It has been demonstrated that slightly lower contact angles values were observed on Teflon and glass surfaces for the AE:APG:soap mixtures but the results were obtained for higher concentration of the components. In addition, all studied solutions have very good surface properties in acidic, basic and neural media. However, the AE:soap (molar ratio of 1:2), AE:APG (2:1) and AE:APG:soap (1:1:1) compositions improved their wetting power at pH 7 on the aluminium and glass surfaces, as compared to solutions at other pH values tested (selected Θ values close to zero—perfectly wetting liquids). All described effects detected would allow less surfactant to be used to achieve the maximum capacity of washing, wetting or solubilizing while minimizing costs and demonstrating environmental care.     

Increased HDL Size and Enhanced Apo A-I Catabolic Rates Are Associated With Doxorubicin-Induced Proteinuria in New Zealand White Rabbits

The catabolism and structure of high‐density lipoproteins (HDL) may be the determining factor of their atheroprotective properties. To better understand the role of the kidney in HDL catabolism, here we characterized HDL subclasses and the catabolic rates of apo A‐I in a rabbit model of proteinuria. Proteinuria was induced by intravenous administration of doxorubicin in New Zealand white rabbits (n = 10). HDL size and HDL subclass lipids were assessed by electrophoresis of the isolated lipoproteins. The catabolic rate of HDL‐apo A‐I was evaluated by exogenous radiolabelling with iodine‐131. Doxorubicin induced significant proteinuria after 4 weeks (4.47 ± 0.55 vs. 0.30 ± 0.02 g/L of protein in urine, P < 0.001) associated with increased uremia, creatininemia, and cardiotoxicity. Large HDL2b augmented significantly during proteinuria, whereas small HDL3b and HDL3c decreased compared to basal conditions. HDL2b, HDL2a, and HDL3a subclasses were enriched with triacylglycerols in proteinuric animals as determined by the triacylglycerol‐to‐phospholipid ratio; the cholesterol content in HDL subclasses remained unchanged. The fractional catabolic rate (FCR) of [¹³¹I]‐apo A‐I in the proteinuric rabbits was faster (FCR = 0.036 h^?1) compared to control rabbits group (FCR = 0.026 h^?1, P < 0.05). Apo E increased and apo A‐I decreased in HDL, whereas PON‐1 activity increased in proteinuric rabbits. Proteinuria was associated with an increased number of large HDL2b particles and a decreased number of small HDL3b and 3c. Proteinuria was also connected to an alteration in HDL subclass lipids, apolipoprotein content of HDL, high paraoxonase‐1 activity, and a rise in the fractional catabolic rate of the [¹³¹I]‐apo A‐I.     

Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis

This study evaluated the long-term microleakage of access cavities conditioned with phosphoric acid and deproteinizing agents for root-canal-treated teeth using fluid filtration and microscopical analysis. Occlusal surfaces of extracted human mandibular premolars (N = 90) were removed leaving a 4 mm coronal length from the cemento-enamel junction. After root canal treatment, the specimens were randomly divided into four experimental groups (n = 21) and the remaining teeth were used for positive control group (n = 6): SB: 35% H₃PO₄ + Adper Single Bond 2; SSB: 35% H₃PO₄ + 5.25% NaOCl + 10% Sodium ascorbate (C₆H₇NaO₆) + Adper Single Bond 2; XP: 35% H₃PO₄₊XP Bond; SXP: 35% H₃PO₄₊5.25% NaOCl + 10% Sodium ascorbate + XP Bond. All cavities were restored with a resin composite (Filtek Z250). After removing the root filling from the apical side, teeth were subjected to fluid filtration test for 1 week, 6 and 12 months followed by ×2500 thermocycling after 1st week and 6th months each. Data were analyzed using one-way ANOVA and Dunnet T3 tests (α = 0.05). SEM analyses were carried out after each microleakage evaluation in two random teeth from all groups. Microleakage values in groups SB and XP presented no significant difference in any of the evaluated period (p > 0.05). Microleakage results of SXP (0.01665) group showed significant difference compared to XP (0.03377) and SB (0.03049) groups after 12 months. SSB group (0.00901) showed significantly less microleakage among all other groups (0.01665–0.03377) (p < 0.05). Prior to endodontic treatment, in access cavities, acid etching with 35% H₃PO₄ followed by the application of NaOCl and sodium ascorbate completely destroyed the collagen layer, reducing the microleakage and resin–dentin interface degradation up to 12 months.     

Production of Methyl Oleate in Reactive‐Separation Systems

The esterification of oleic acid and methanol using sulfuric acid as a homogeneous catalyst is studied in reactive‐separation systems. The conversion of the free fatty acid was investigated in two different experiments with the molar ratio of methanol/oleic acid, amount of catalyst, temperature, and reaction time as variables. The conversion of the free fatty acid was found to depend strongly on the molar ratio of methanol/oleic acid. The reaction time had a direct effect on the conversion of the free fatty acid, and this conversion decreased with higher temperature. These results were valuable for a preliminary study on biodiesel production, using an acid homogeneous catalyst in a reactive dividing‐wall distillation column.     

Investigation of the Antiproliferative Properties of Natural Sesquiterpenes from Artemisia asiatica and Onopordum acanthium on HL-60 Cells in Vitro

Plants and plant extracts play a crucial role in the research into novel antineoplastic agents. Four sesquiterpene lactones, artecanin (1), 3β-chloro-4α,10α-dihydroxy-1α,2α-epoxy-5α,7αH-guaia-11(13)-en-12,6α-olide (2), iso-seco-tanapartholide 3-O-methyl ether (3) and 4β,15-dihydro-3-dehydrozaluzanin C (4), were isolated from two traditionally used Asteraceae species (Onopordum acanthium and Artemisia asiatica). When tested for antiproliferative action on HL-60 leukemia cells, these compounds exhibited reasonable IC₅₀ values in the range 3.6–13.5 μM. Treatment with the tested compounds resulted in a cell cycle disturbance characterized by increases in the G1 and G2/M populations, while there was a decrease in the S phase. Additionally, 1–3 elicited increases in the hypodiploid (subG1) population. The compounds elicited concentration-dependent chromatin condensation and disruption of the membrane integrity, as revealed by Hoechst 33258–propidium staining. Treatment for 24 h resulted in significant increases in activity of caspases-3 and -9, indicating that the tested sesquiterpenes induced the mitochondrial pathway of apoptosis. The proapoptotic properties of the sesquiterpene lactones were additionally demonstrated withannexin V staining. Compounds 1 and 2 increased the Bax/Bcl-2 expression and decreased the expressions of CDK1 and cyclin B2, as determined at the mRNA level by means of RT-PCR. These experimental results indicate that sesquiterpene lactones may be regarded as potential starting structures for the development of novel anticancer agents.     

Inactivation of Fusarium oxysporum Conidia in Soil with Gaseous Ozone – Preliminary Studies

ABSTRACT

In this study, the efficiency of gaseous ozone (O₃) injected in the soil as an oxidizing agent for the inactivation of F. oxysporum was evaluated under laboratory conditions. The results show the treatment reached an inactivation efficiency of 76% after an applied dose of 0.40 g O₃ kg ^?1 soil. This shows that the injection of O₃ can be a viable alternative to control pathogenic organisms in the soils. Nevertheless, it is clear that more studies on determining the effects of this treatment on soil quality are needed.     

Iron(II) Sulfate(VI) from Titania Production as a Raw Material for Preparation of Hydrogen Sulfide Sorbents

A hybrid sorbent material for removal of hydrogen sulfide from air was developed. The material is based on activated carbon and iron compounds obtained from waste iron(II) sulfate(VI) heptahydrate. The iron salt is deposited on the carbonaceous support and subjected to oxidation (Fe²⁺ to Fe³⁺) using atmospheric oxygen under alkaline conditions. An effect of H₂O₂ addition to the process on the composition of the resultant material was also examined. X-ray diffraction (XRD) analyses confirmed easy conversion of waste FeSO₄·7H₂O to iron oxides Fe₃O₄ and FeOOH. The activated carbon supporting iron oxides revealed a higher efficiency in H₂S elimination from air compared to the commercial activated carbon, without any modification.     

Design and Analysis of New Micromixers Based on Distillation Column Trays

Four passive micromixer designs (G1, G2, G3, and G4) based on distillation columns trays are proposed. The performance of the devices is assessed by numerical simulations. The mixing performance is investigated for different Reynolds numbers and channel heights for oil/ethanol flow. G1 and G4 designs provided a high mixing index. The G1 device achieved superior mixing performance with a moderate pressure drop due to the induced flow recirculation pattern for a relatively high flow rate, highlighting the potential use of such microdevice for scale-up and numbering-up of microdevices in modular chemical plant processing.