Thermal dehydrochlorination of pure PVC polymer: Part I—thermal degradation kinetics by thermogravimetric analysis

Thermal degradation of PVC occurs in two stages, with each stage subdivided into two substages. The first refers to the dehydrochlorination, where hydrochloric acid is formed, and giving polyene structures. Hitherto, the degradation mechanism and action of hydrochloric acid as a catalyst during the dehydrochlorination stage are poorly known. Recently, the importance of the tacticity has gained attention for its influence on the dehydrochlorination mechanism. The present work focused on the dehydrochlorination stage, studying the molecular structure by FTIR analysis and the kinetic parameters by TGA analysis in Nitrogen atmosphere, based on three mathematical methods: Friedman, Kissinger, and Flynn-Wall-Ozawa. The sample was a pure homopolymer obtained by suspension polymerization. The dehydrochlorination kinetics follows a first order reaction model and occurs by nucleation and growth. The dehydrochlorination begins with the loss of very labile chlorine atoms present in defective and isotactic molecular segments. The formed HCl acts as a catalyst in the degradation. Following 40% conversion, a drop in Ea is observed. After that, chlorine atoms present in syndiotactic and atactic sequences, are released and, added to the large number of polyene chain sequences, and an increase in Ea is observed up to 60% conversion, where the dehydrochlorination stage is concluded.     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite‐time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off‐line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state‐feedback only. To illustrate the usefulness of the approach, real‐time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov‐driven voltage fluctuations. Copyright © 2015 John Wiley & Sons, Ltd.     

Landmark-based music recognition system optimisation using genetic algorithms

Audio fingerprinting allows us to label an unidentified music fragment within a previously generated database. The use of spectral landmarks aims to obtain a robustness that lets a certain level of noise be present in the audio query. This group of audio identification algorithms holds several configuration parameters whose values are usually chosen based upon the researcher’s knowledge, previous published experimentation or just trial and error methods. In this paper we describe the whole optimisation process of a Landmark-based Music Recognition System using genetic algorithms. We define the actual structure of the algorithm as a chromosome by transforming its high relevant parameters into various genes and building up an appropriate fitness evaluation method. The optimised output parameters are used to set up a complete system that is compared with a non-optimised one by designing an unbiased evaluation model.     

Analytical error analysis of Clifford gates by the fault-path tracer method

We estimate the success probability of quantum protocols composed of Clifford operations in the presence of Pauli errors. Our method is derived from the fault-point formalism previously used to determine the success rate of low-distance error correction codes. Here we apply it to a wider range of quantum protocols and identify circuit structures that allow for efficient calculation of the exact success probability and even the final distribution of output states. As examples, we apply our method to the Bernstein–Vazirani algorithm and the Steane [[7,1,3]] quantum error correction code and compare the results to Monte Carlo simulations.     

Learning Temperature Dynamics on Agar-Based Phantom Tissue Surface During Single Point CO $$_2$$ 2 Laser Exposure

Neural Processing Letters - This paper presents an approach to determine a model of superficial tissue temperature dynamics during continuous wave CO $$_2$$ laser irradiation. The main contribution...     

A selective conductive polymer-based sensor for volatile halogenated organic compounds (VHOC)

A novel poly(p-xylylene), PPX, derivative bearing alkoxyphenyl side groups was electrochemically synthesized in 87% yield. The polymer, poly(4′-hexyloxy-2,5-biphenyleneethylene) (PHBPE), presented a fraction (92%) soluble in common organic solvents. It showed to be thermally resistant up to 185 °C. UV–vis analysis revealed an E_gap of 3.5 eV. Gas sensors made from thin films of 10-camphorsulfonic acid-doped PHBPE deposited on interdigitated electrodes exhibited significant changes in electrical conductance upon exposure to five VHOCs: 1,2-dichloroethane, bromochloromethane, trichloromethane, dichloromethane and tetrachloromethane. The conductance decreased after exposure to tetrachloromethane and increased after exposure to all the other VHOCs. Three-dimensional plots of relative response versus time of half response versus time of half recovery showed good discrimination between the five VHOCs tested.     

Multicriteria decisions on interdependent infrastructure transportation projects using an evolutionary-based framework

When evaluating transportation infrastructure projects and determining which of them will be carried out from a set of projects and given a budget constraint, several criteria need to be considered in the decision. Standard evaluation practices imply the aggregation of impacts into one utility function which is later optimized. Nevertheless these techniques used for translation of different measuring units into monetary terms are highly controversial. Multicriteria techniques can explicitly deal with different measuring units, however, they are not suitable to model interdependence relationships of projects that share a common characteristic (same route, location or target population, for instance). In this research we model this transportation planning problem, the multi-objective transportation infrastructure project selection problem (MTIPSP), as a constrained multi-objective optimization problem with quadratic objective functions, using a variation of the multi-objective 0–1 knapsack problem plus some additional constraints. Given the combinatorial nature of the problem, an evolutionary-based framework is used for the identification of Pareto solutions, and later, those with non-attractive properties are filtered using a Knee Identification Procedure. The final selection of the projects portfolio is made using a well known multicriteria decision aid method and including the decision makers’ preferences based on the existing context.     

Analysis of the inappropriate utilization of the emergency service of a third-level hospital

OBJECTIVE: a) To find the reasons for inadequate use of Hospital Casualty Departments (HCDs); b) to discover the general population's levels of information concerning non-hospital Emergency Services (NESs); c) to analyse the relationship between the type of Primary Care Centre (PCC), i.e. whether reformed or not, and inadequate use of HCDs. DESIGN: A crossover study. SETTING: The Germans Trias i Pujol Hospital Casualty Department, Badalona. PATIENTS: A random sample of 321 patients over 14 years old, who were attended for pathologies considered emergencies not requiring hospital treatment. MEASUREMENTS AND MAIN RESULTS: The variables gathered were: age, gender, where the patient came from, reason for hospital use, knowledge of NESs and subsequent referral. 83.2% of patients attended on their own initiative. The main reasons given were "advantages of a hospital" and "the persistence of symptoms." 49% of the patients stated they knew of the NESs. 80% of the patients proceeded from PCCs which had not been reformed. There were no statistically significant differences (p > 0.05) when the variables "reason for use" and "knowledge of NESs" were compared in relation to where the patient came from (i.e. reformed or non-reformed PCC). CONCLUSIONS: General practitioners in reformed PCCs are less likely to refer to HCDs. Knowledge and use of NESs should be actively supported.     

Light Controlled Biohybrid Microbots

Biohybrid microbots integrate biological actuators and sensors into synthetic chassis with the aim of providing the building blocks of next-generation micro-robotics. One of the main challenges is the development of self-assembled systems with consistent behavior and such that they can be controlled independently to perform complex tasks. Herein, it is shown that, using light-driven bacteria as propellers, 3D printed microbots can be steered by unbalancing light intensity over different microbot parts. An optimal feedback loop is designed in which a central computer projects onto each microbot a tailor-made light pattern, calculated from its position and orientation. In this way, multiple microbots can be independently guided through a series of spatially distributed checkpoints. By exploiting a natural light-driven proton pump, these bio-hybrid microbots are able to extract mechanical energy from light with such high efficiency that, in principle, hundreds of these systems can be controlled simultaneously with a total optical power of just a few milliwatts.