Net-value of the relativistic crystal field effect

The relativistic crystal field theory in case of the rare earth ion doped materials is presented. In order to calculate the values of crystal field splittings the effectively relativistic crystal field operators are applied. The matrix elements of these operators are evaluated in the non-relativistic LS scheme, whereas the radial integrals include one electron Dirac–Fock wavefunctions. The numerical results of the relativistic crystal field effects are presented for Ce³⁺ or Yb³⁺ ions in LuPO₄, and they are compared with those obtained from the non-relativistic approach.     

Differences in safety belt use by race

The purpose of the study was to identify daytime differences in safety belt use by race. Safety belt use was investigated in a direct observation survey of drivers and front-outboard passengers throughout Michigan. Data were weighted to calculate statewide safety belt use rates by race. Race was assessed visually by trained observers. The study showed that motor vehicle occupants identified as Black had significantly lower safety belt use than those occupants identified as White or Other.     

Structural and photoresponsive behavior of a series of (phenylene)azobenzene‐containing liquid‐crystalline methacrylic copolymers

A series of side‐chain liquid‐crystalline methacrylic copolymers, having various amounts of 4′‐(4‐decyloxyphenyl)‐4‐(hexyloxy)‐azobenzene as the mesogenic group, were synthesized and characterized by differential scanning calorimetry, polarizing optical microscopy and X‐ray diffraction to determine their mesomorphic properties, and by UV?visible spectrometry to elucidate their optical absorption characteristics. Also, birefringence and surface relief gratings were photoinduced in the films using a laser beam of 413 nm. Copolymers with high mesogen contents display a polymorphic behavior of the smectic type. The smectic order tends to disappear as the content of mesogens in the copolymer decreases, going from extended lamellar domains of chromophores packed in a parallel position, typical for smectic liquid crystals, to small aggregates of chromophores dispersed in an amorphous matrix. Important hypsochromic shifts (Δλ_max ≈ 20 nm), associated with π interactions between neighboring aromatic groups, confirm the aggregation of chromophores in lamellar structures. The light‐induced birefringence (0.005 ? 0.06) is not as high as expected but it corroborates that there exists a tight interplay between photoinduced orientation and intrinsic molecular order. Surface relief gratings were recorded in copolymers with low mesogen content (15 ? 30 mol%), showing by atomic force microscopy sinusoidal profiles with an average depth of around 150 nm. © 2013 Society of Chemical Industry     

Partial characterization of white cabbages (Brassica oleracea var. capitata f. alba) from different regions by glucosinolates, bioactive compounds, total antioxidant activities and proteins

Glucosinolates (GLS), antioxidative compounds, total radical scavenging activities (TRSAs) and proteins of white cabbage samples derived from different regions of Europe, collected in the spring and autumn, were studied. Glucobrassicin and sinigrin were the dominating GLS in all analyzed cabbage samples. Depending on origin, these two GLS accounted for ∼30% to ∼70% of the total. The total GLS content ranged from 3.3 to 7.7 μmol/g dw in lyophilized vegetables. Assays based on electron transfer [total phenols by Folin-Ciocalteu reagent (FCR), 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)] radical cation (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH)] were used to compare the TRSAs and the main bioactive compounds in cabbage. Total polyphenols varied from 2.4 to 4.9 GAE/g dw. The TRSAs ranged from 2.7 to 8.2 μmol TE/g dw in ABTS test and from 2.4 to 5.4 μmol TE/g dw in DPPH assay. The maximum amount of polyphenol compounds, antioxidant activity, as well as total GLS content, were recorded in Belgian cabbage harvested in the autumn and the lowest ones were found for Poland 2 cabbage harvested in the spring. In extracted and separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) proteins from cabbage leaves only in samples from England and Belgium some differences in patterns were found in the regions of 60 and 97 kDa. The calculated correlations between antioxidative potency and the abundance of bioactive compounds were highly statistically significant. This suggests that TRSA could serve as a means of standardization of natural mixtures, at least in the case of cabbage, necessary to compare results of biological studies carried out for vegetable derived samples.     

Electrodeposition and heat treatment of nickel/silicon carbide composites

Electrodeposited Ni/SiC composite coatings were obtained in a Watts-type bath. The effect of fine SiC particles on polarization curves of the cathodic reduction of nickel ions was discussed. The incorporation of the particles into the deposit with respect to current density and SiC concentration in the bath was tested. Cathodic current efficiencies were also calculated. Structure of as-plated and heat-treated Ni/SiC composites were examined by means of metallography observations as well as scanning and transmission electron microscopy methods. Two phase transformations in the temperatures range of 20-700 °C were found. For annealed samples, Ni₂Si and Ni₃Si₂ phases were identified. Hardening of the Ni/SiC composites as a function of the particle content in the deposit and annealing temperature was determined by means of the microhardness testing method.     

Particle emission characteristics of office printers

In modern society, printers are widely used in the office environment. This study investigated particle number and PM2.5 emissions from printers using the TSI SMPS, TSI CPC 3022, and 3025A TSI P-Trak and DustTrak. The monitoring of particle characteristics in a large open-plan office showed that particles generated by printers can significantly (p = 0.01) affect the submicrometer particle number concentration levels in the office. An investigation of the submicrometer particle emissions produced by each of the 62 printers used in the office building was also conducted and based on the particle concentrations in the immediate vicinity of the printers, after a short printing job, the printers were divided into four classes: non-emitters, and low, medium, and high emitters. It was found that approximately 60% of the investigated printers did not emit submicrometer particles and of the 40% that did emit particles, 27% were high particle emitters. Particle emission characteristics from three different laser printers were also studied in an experimental chamber, which showed that particle emission rates are printer-type specific and are affected by toner coverage and cartridge age. While a more comprehensive study is still required, to provide a better database of printer emission rates, as well as their chemical characteristics, the results from this study imply that submicrometer particle concentration levels in an office can be reduced by a proper choice of the printers.     

Exposure to particles from laser printers operating within office workplaces

While recent research has provided valuable information as to the composition of laser printer particles, their formation mechanisms, and explained why some printers are emitters while others are low emitters, questions relating to the potential exposure of office workers remained unanswered. In particular, (i) what impact does the operation of laser printers have on the background particle number concentration (PNC) of an office environment over the duration of a typical working day? (ii) What is the airborne particle exposure to office workers in the vicinity of laser printers? (iii) What influence does the office ventilation have upon the transport and concentration of particles? (iv) Is there a need to control the generation of, and/or transport of particles arising from the operation of laser printers within an office environment? (v) What instrumentation and methodology is relevant for characterizing such particles within an office location? We present experimental evidence on printer temporal and spatial PNC during the operation of 107 laser printers within open plan offices of five buildings. The 8 h time-weighted average printer particle exposure is significantly less than the 8 h time-weighted local background particle exposure, but that peak printer particle exposure can be greater than 2 orders of magnitude higher than local background particle exposure. The particle size range is predominantly ultrafine (<100 nm diameter). In addition we have established that office workers are constantly exposed to nonprinter derived particle concentrations, with up to an order of magnitude difference in such exposure among offices, and propose that such exposure be controlled along with exposure to printer derived particles. We also propose, for the first time, that peak particle reference values be calculated for each office area analogous to the criteria used in Australia and elsewhere for evaluating exposure excursion above occupational hazardous chemical exposure standards. A universal peak particle reference value of 2.0 × 10(4) particles cm(-3) has been proposed.     

Relaxation processes and intermolecular interactions in PVME hydrogels in sub-zero temperatures: Glass transition and pre-melting of ice

The phase transition observed by various methods in poly(vinyl methyl ether)/water systems at around 18 °C has been assigned by some investigators to the pre-melting of water and by others to a glass transition of the polymer. In this study, broadband dielectric spectroscopy and temperature modulated differential scanning calorimetry were used to identify this transition in radiationally crosslinked poly(vinyl methyl ether) hydrogels, as well as to analyse sub-zero relaxation processes in such a three-phase (polymer/ice/liquid water) system. The process at 18 °C was related to the pre-melting of water induced by the segmental motions of the polymer; however, it was seen to be one transition due to the cooperative motions of both compounds. The atypical (two regimes) temperature dependence of the segmental motion process was observed and was related to confinement of the polymer chains between ice clusters below approximately ?24 °C; furthermore, the main dielectric process of hexagonal ice was identified and a Maxwell-Wagner effect was observed.     

Detection of clenbuterol in beef meat,liver and kidney by mid‐infrared spectroscopy (FT‐Mid IR) and multivariate analysis

Mid‐infrared spectroscopy (FT‐Mid IR) coupled with multivariate analysis was used to predict clenbuterol in beef meat, liver and kidney. A SIMCA model was also developed to discriminate between pure (beef meat, liver and kidney) and spiked with clenbuterol samples (beef meat‐clenbuterol, liver‐clenbuterol and kidney‐clenbuterol). The best models to predict clenbuterol concentrations were obtained using the partial least squares algorithm (PLS) with a R² > 0.9 and SEC and standard error of prediction <0.296 and 0.324, respectively. The SIMCA model used to discriminate pure and spiked with clenbuterol samples showed 100% correct classification rate. Methods detection limit was 2 μg kg^?1. FT‐Mid IR coupled with chemometrics could be a simple and rapid screening tool for monitoring clenbuterol in beef meat, liver and kidney implicated in food poisoning. This method could be use for screening purposes.