Designing smarter touch-based interfaces for educational contexts

In next-generation classrooms and educational environments, interactive technologies such as surface computing, natural gesture interfaces, and mobile devices will enable new means of motivating and engaging students in active learning. Our foundational studies provide a corpus of over 10,000 touch interactions and nearly 7,000 gestures collected from nearly 70 adults and children aged 7 years and above, which can help us understand the characteristics of children’s interactions in these modalities and how they differ from adults. Based on these data, we identify key design and implementation challenges of supporting children’s touch and gesture interactions, and we suggest ways to address them. For example, we find children have more trouble successfully acquiring onscreen targets and having their gestures recognized than do adults, especially the youngest age group (7–10 years old). The contributions of this work provide a foundation that will enable touch-based interactive educational apps that increase student success.     

Supported Alumina Members by an in-Situ Sol–Gel Method

Alumina membranes were prepared using a sol–gel process. Thin gel layers were grown onto porous alumina support tubes by using the permeation of water through the tube to control the rate of hydrolysis. Optimum coating conditions were found to be an ASB to 2-propanol volume ratio of 1:25, coating times between 10 and 15 s, and partial drying times between 2.5 and 3 min, depending on whether the water was flowing in the tube or stored in the tube. The coatings remained crack-free and adherent when fired to 800°C.     

Lipase PS-catalyzed transesterification of citronellyl butyrate and geranyl caproate: Effect of reaction parameters

Pseudomonas sp. lipase PS was immobilized by adsorption and tested for its ability to catalyze the synthesis of citronellyl butyrate and geranyl caproate by transesterification in n-hexane. The reaction parameters investigated were: enzyme load, effect of substrate concentration, added water, temperature, time course, organic solvent, pH memory, and enzyme reuse. Yields as high as 96 and 99% were obtained for citronellyl butyrate and geranyl caproate, respectively, with 300 units (approx. 15% w/w of reactants) of lipase PS. Increasing amounts of terpene alcohol inhibited lipase activity, while excess acyl donor (triacylglycerol) concentration enhanced ester production. Optimal yields were obtained at temperatures from 30–50°C after 24-h incubation time. Yields of 90 and 99% were obtained for citronellyl and geranyl esters, respectively, with 2% added water. Solvents with log P values ≥ 2.5 showed the highest conversion yields. pH 7 and 6–8 seemed to be ideal for citronellyl butyrate and geraniol caproate, respectively. The lipase remained active after reusing 12 times.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

High-Temperature Crack Growth in Monolithic and SiCw-Reinforced Silicon Nitride under Static and Cyclic Loads

Experimental results are presented on subcritical crack growth under sustained and cyclic loads in a HIPed Si₃N₄ at 1450°C and a hot–pressed Si₃N₄–10 vol% SiC_w composite in the temperature range 1300°–1400°C. Static and cyclic crack growth rates are obtained from the threshold for the onset of stable fracture with different cyclic frequencies and load ratios. Fatigue crack growth rates for both the monolithic and SiC_w-reinforced Si₃N₄ are generally higher than the crack growth velocities predicted using static crack growth data. However, the threshold stress intensity factor ranges for the onset of crack growth are always higher under cyclic loads than for sustained load fracture. Electron microscopy of crack wake contact and crack–tip damage illustrate the mechanisms of subcritical crack growth under static and cyclic loading. Critical experiments have been conducted systematically to measure the fracture initiation toughness at room temperature, after advancing the crack subcritically by a controlled amount under static or cyclic loads at elevated temperatures. Results of these experiments quantify the extent of degradation in crack–wake bridging due to cyclically varying loads. The effects of preexisting glass phase on elevated temperature fatigue and fracture are examined, and the creep crack growth behavior of Si₃N₄–based ceramics is compared with that of oxide-based ceramics.     

Single-stage flowing liquid film impactor for continuous on-line particle analysis

A single-stage “wet impactor” is presented, where the impaction occurs on a regenerated water surface. The developed impactor is equipped with an impaction liquid support plate of etched glass and a drain spout providing a continuous liquid flow covering the impaction area. Subsequent transport of the impaction liquid makes an on-line determination possible. With multiple nozzles (74 holes, 0.3 mm i.d.) and an air flow of 101/min the cut-off was determined to 0.41 ± 0.02 μm. The impactor was also investigated for its particle loss. The cut-off function, regarding the consequences of letting impaction occur in a liquid film is discussed and compared to conventional impactors. The analysis technique was tested in an ambient air measurement study with an ion chromatograph attached to the sampling system.     

Pheromone specificity inEriocrania semipurpurella (Stephens) andE. sangii (Wood) (Lepidoptera: Eriocraniidae) based on chirality of semiochemicals

The fifth abdominal segment of femaleEriocrania semipurpurella (Stephens) andE. sangii (Wood) contains a pair of exocrine glands. Hexane extracts of this segment were prepared from both species and analyzed by gas chromatography with simultaneous flame ionization and electroantennographic detection (EAD). For both species, the EAD active peaks were identified as nonan-2-one, (Z)-6-nonen-2-one, and (Z)-6-nonen-2-ol by means of mass spectrometry and comparison of retention indices with those of synthetic standards. Enantiomeric separation of chiral alcohols from the female extracts was achieved by gas chromatographic analysis on a cyclodextrin column. InE. semipurpurella, a mixture of (2S,6Z)-nonen-2-ol and (2R,6Z)-nonen-2-ol (2: I) was found, whereas inE. sangii (2S,6Z)-nonen-2-ol was the predominant enantiomer and only traces of theR enantiomer were indicated by the antennal response. In field tests, a blend of the three compounds was not attractive to conspecific males. A subtractive assay showed that the alcohol in various enantiomeric mixtures was the only attractive compound, whereas addition of (Z)-6-nonen-2-one to the alcohol completely inhibited the attraction of both species. A trapping experiment including a wide range of ratios between theR andS enantiomers showed that baits containing 95–100% of theS enantiomer were attractive to maleE. sangii, whereas males ofE. semipurpurella were attracted to all tested ratios of the enantiomers. However, the response profiles of maleE. semipurpurella differed between populations from southern Sweden, south Finland, and the Kola Peninsula in Russia. In south Sweden males were maximally attracted to a racemic mixture of the alcohols. At the Kola PeninsulaE. semipurpurella was attracted to baits containing 95–100% of theR enantiomer. In south Finland all tested ratios between 0 and 100%R enantiomer trappedE. semipurpurella, but the trap catches appeared to be bimodally distributed with peaks around 15 and 70%R enantiomer. The trapping results suggest the existence of pheromone races or sibling species among the specimens identified asE. semipurpurella.Dedicated to Prof. H. J. Bestmann on the occasion of his 70th birthday.     

Development of a Phytochemical-Based Lure for the Dried Bean Beetle Acanthoscelides obtectus Say (Coleoptera: Chrysomelidae)

The dried bean beetle, Acanthoscelides obtectus, is an economically important, worldwide pest of legume crops including dry beans, Phaseolus vulgaris. Assessment of A. obtectus infestation levels in pre-harvest field crops and post-harvest granaries is difficult to achieve because there is no effective monitoring tool for early detection so that interventions can be deployed as needed. Because A. obtectus is a generic pollen and nectar feeder, we adopted an electrophysiological (EAG) screening approach, using the antennae of female A. obtectus to identify physiologically active, volatile phytochemicals, which could then be investigated for their attractiveness to A. obtectus in laboratory behavioral assays and preliminary field tests. Of the 27 compounds tested in EAG screening, 5 compounds, i.e., methyl anthranilate, methyl eugenol, benzyl alcohol, (RS)-lavandulol, and 2-phenylethanol, elicited stronger EAG responses than the standard (1-phenylethanol). In 4-arm olfactometer bioassays, female A. obtectus preferred the olfactometer arm containing the odor of either methyl anthranilate or benzyl alcohol compared to the solvent control. In preliminary field tests using these 2 compounds as a binary mixture, at least 5 times as many beetles were caught on baited traps compared to non-baited traps. The field data also suggested that benzyl alcohol was primarily responsible for the field activity of the blend. We hypothesize that the attraction of A. obtectus to the combined benzyl alcohol/methyl anthranilate and the single benzyl alcohol baits is connected to the species` nectar- and pollen-feeding behaviour and not to its intraspecific communication. To our knowledge, this is the first evidence that A. obtectus behavior in the field can be modified by the deployment of plant-derived semiochemicals.

     

Host Plant Constancy in Ovipositing Manduca sexta

Journal of Chemical Ecology - Many pollinating insects exhibit flower constancy, i.e. they target flower species they have already experienced and fed from. While the insects might profit from...     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).