导向剂加入方式对Y型沸石合成的影响

以煤系高岭土为原料,采用液态补硅手段调节体系SiO2/Al2O3、导向剂两步加入法合成了Y型沸石.考察了导向剂不同加入方式对Y型沸石合成的影响.采用合理的导向剂两步加入法,特别是通过控制导向剂第二步加入的时间,可明显缩短Y型沸石的晶化时间,并有效地减少P型沸石的生成.     

The quantification of remote sensing

The paper firstly defined the remote sensing information quantification, analyzed the necessity of developing remote sensing quantification, figured out the application guidelines requirement, and pointed out the importance of quantification research. Then taking the remote sensing application research of CBERS-02 data quantification as the example, the paper described the whole quantification system of “remotely sensed digital signal-radiation information-field parameter inversion”. Finally the paper gave the prospect for the development trend of the quantitative remote sensing.     

S28-248型偏心BDC钻头的研制与应用

为了提高中原油田沙3中至沙4段四开小井眼的钻井速度,有效地解决易卡钻、钻速低、成本高以及小间隙井眼固井质量差等问题,中原油田与川石·克里斯坦森金刚石钻头有限公司合作,研制开发了用于深部小井眼钻井的149.2mm的S28-248型偏心BDC钻头。详细介绍了该钻头的设计特点及现场应用情况。     

自制小型铺轨机具铺设隧道宽枕轨道

结合宝成复线新大滩隧道铺设J-82型预应力混凝土宽轨枕板采用的施工技术，就其机具的组成功用及施工方法作了介绍，指出了KPZ-50型铺轨机具的优点。     

劣化环丁砜再生技术的工业应用

为解决国内外环丁砜抽提芳烃工艺中环丁砜的劣化问题，在不添加单乙醇胺的前提下，采用阴离子交换树脂处理劣化的环丁砜，可使系统的pH值从3．4升到5．5左右，离子交换树脂需30d左右再生一次，降低了设备的腐蚀，减少了装置的堵塞，使系统运行稳定，取得了可观的社会效益和经济效益。     

带吊车门式刚架轻型钢结构厂房的设计与分析

以实际工程为背景，采用门式刚架轻型房屋钢结构设计规程，对带吊车门式刚架、吊车梁、抗风柱及基础的受力特点、设计方法进行分析，解决了设计中所遇到的问题。     

Microfabricated preconcentrator-focuser for a microscale gas chromatograph

The design, fabrication, and testing of a preconcentrator-focuser (PCF), consisting of a thick micromachined Si heater packed with a small quantity of a granular adsorbent material are described. The PCF is developed to capture and concentrate vapors for subsequent focused thermal desorption and analysis in a micro gas chromatograph. The microheater contains an array of high-aspect-ratio, etched-Si heating elements, 520 /spl mu/m (h)/spl times/50 /spl mu/m (w)/spl times/3000 /spl mu/m (l), bounded by an annulus of Si and thermally isolated from the remaining substrate by an air gap. This structure is sandwiched between Pyrex glass plates with inlet/outlet ports that accept capillary tubes for sample flow and is sealed by anodic bonding (bottom) and rapidly annealed glass/metal/Si solder bonding (top). The large microheater surface area allows for high adsorption capacity and efficient, uniform thermal desorption of vapors captured on the adsorbent within the structure. The adsorbent consists of roughly spherical granules, /spl sim/200 /spl mu/m in diameter, of a high-surface-area, graphitized carbon. Key design considerations, fabrication technologies, and results of performance tests are presented with an emphasis on the thermal desorption characteristics of several representative volatile organic compounds as a function of volumetric flow rates and heating rates. Preconcentration factors as high as 5600 and desorbed peak widths as narrow as 0.8 s are achieved from 0.25-L samples of benzene at modest heating rates. The effects of operating variables on sensitivity, chromatographic resolution, and detection limits are assessed. Testing of this PCF with a micromachined separation column and integrated sensor array is discussed briefly.     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.     

浅析当今写意青花的题材选择

青花装饰是景德镇的传统装饰方法之一，其中的写意青花又以其简约萧疏的艺术特征获得了人们的普遍喜爱。针对时代的变化影响，研究了当今写意青花在题材选择上与传统写意青花的差异。     

郑411块超稠油试油试采工艺技术应用

郑411块沙三段地层疏松出砂、原油粘度高，属中深层超稠油，常规试油试采方法难以突破出油关，采用APR全通径氮气垫测试、地层与井筒复合防砂、水平井配合直井蒸汽吞吐、氮气泡沫封堵调剖和井筒加热举升稠油等配套工艺技术，取得了较好的效果，为中深层超稠油油藏的开发提供了技术思路。