25Cr3Mo3NiNb二次硬化钢冲击性能的研究

研究了二次硬化钢25Cr3Mo3NiNb的冲击韧度随回火温度和试验温度的变化.结果发现,试验钢在200℃回火时冲击韧度较高,300～600℃回火时冲击韧度值较低,600℃以上回火时冲击韧度值迅速升高,640℃回火时冲击韧度达到最高值55J/cm2,640℃以上回火时冲击韧度值有所降低.640℃回火后试验钢的冷脆转变温度为10℃,屈服强度为960MPa,可以满足兵器特种结构件高强度高韧性的要求.     

机床故障诊断系统知识表示的研究

针对所研究的机床故障诊断专家系统，以故障树分析法为基础，采用面向对象的事件知识表示方法。并以面向对象编程技术给出了知识表示的示例。分析了这种知识表示方法的特点。实践证明，这种知识表示方法在故障诊断专家系统中是确实有效的，而且这种表示方法融合了多种传统知识表示方法的长处，是一种值得研究与应用的方法。     

延缓与加速A1-Cu合金时效析出反应的研究

研究了溶质原子浓度、Si晶体第二相、残余形变、外加莫来石(Mullite)短纤维及其交互作用，对二元Al—Cu合金时效析出行为的影响。试验材料采用挤压铸造方法制备，复合材料中纤维体积分数为18％。实验结果表明：随溶质原子浓度的升高，A1-Cu二元合金中GP，θ″和θ′相的析出都得到了相应加快；Si含量超过一定值后，随Si含量增加，A1-Cu-Si合金中GP区形成受到抑制，而θ″和θ′相的析出得到加快；形变对GP区的抑制和对θ″，θ′和θ相的加速析出具有十分明显的作用；纤维本身除对GP区抑制和对θ″，θ′相的析出加速外，还会与溶质原子、合金元素或第二相以及残余形变交互作用，使GP区被抑制，而θ″，θ′甚至θ相被加速析出等现象进一步加强。用位错理论能较好地解释析出反应延缓与加速的微观机理。     

采用稀土贮氢材料的镍氢电池

介绍了镍-金属氢化物电池的特性和该类电池所用的稀土贮氢材料及其成份配制、制备工艺、合金添加剂对LaNi_5基合金电极综合性能的影响,以及该类电池的应用开发前景。     

Electronic struture of titanium silicides

ＥＬＥＣＴＲＯＮＩＣＳＴＲＵＣＴＵＲＥＯＦＴＩＴＡＮＩＵＭＳＩＬＩＣＩＤＥＳＬｏｎｇ，Ｘｉａｎｇｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｃｈａｎｇｓｈａ４１００８３）Ｃ...     

CoCrPtNb／CrTi／C多层膜记录介质的制备和性能研究

采用CoCrPtNb四元合金作磁记录介质，并采用多层膜结构（CoCrPt）100-Nbx/CrTi／C／Glass制备玻璃盘基硬盘。实验结果表明：采用适宜厚度的籽晶层与合适组分的底层和磁性层的多层膜结构，即使在室温下溅射，此种薄膜磁记录介质也可得到高达260kA／m的矫顽力；在550℃高温下，经过30min真空退火后，其矫顽力有较大幅度提高，并在Nb含量为2．4％（原子分数）时达到极大值386kA／m，适用于高密度磁记录。同时，也详细分析了磁性层和底层组分、籽晶层厚度以及真空退火对磁记录介质磁性能和微结构的影响。     

造气微机工艺控制和运行程序的改进

总结了ＬＹＫ－２型造气炉况寻优控制微机在工艺控制和运行程度方面的改进所取得的成功经验。通过改进，该厂不但稳定了气质气量，而且吨肥煤耗大幅度下降。其经济效益非常显著，为油压微机技术在小氮肥造气工艺上的开发应用，提供了可资借鉴的经验教训。     

Coloring effect of the organic hybrid of polyamide 6 and N,N′‐ethylene‐bis(tetrabromophthalimide)

Coloring study in organic hybrid of polyamide (PA6) and N,N′‐ethylene‐bis(tetrabromophthalimide) (EPT), where the chromophore was self‐assembled by hydrogen bonding formed between PA6 molecular chains and EPT compound, have been characterized by several techniques. CS930 double wavelength lamella scanner was employed to measure the change of color. The existence of hydrogen bonding in PA6/N‐N′‐ethylene‐bis (tetrabromophthalimide) (PA6EPT) was investigated with Fourier transform infrared (FTIR), the results of which were compared with that of PA6 with the same thermal history. FTIR spectra at room temperature revealed that there is essentially hydrogen bonding between PA6 and EPT. The crystallization behavior of PA6EPT affected by hydrogen bonding was studied by using FTIR. The temperature‐dependent behavior of both PA6 and PA6EPT was studied by temperature‐FTIR spectroscopy and differential scanning calorimetry (DSC). With temperature increasing, changes in sensitive, high‐resolution absorbance spectra are observed as dissolve‐volatilizing thin film. Temperature‐FTIR results showed that the hydrogen bonding in PA6EPT attenuated and dissociated considerably at a smaller rate than PA6, that is to say, hydrogen bonding in PA6EPT is more stable than that in PA6. DSC showed that the melting temperature of PA6EPT and PA6 are similar. However, the crystalline degree and crystalline temperature and melting enthalpy of PA6 and PA6EPT are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 594–600, 2007     

热塑性复合材料用混纤预浸料特征

本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析.