34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

ID-based threshold decryption secure against adaptive chosen-ciphertext attack

This paper proposes an identity-based threshold decryption scheme IB-ThDec and reduces its security to the Bilinear Diffie-Hellman problem. Compared with previous work, this conceals two pairing computations in the ciphertext validity verification procedure. The formal proof of security of this scheme is provided in the random oracle model. Additionally, we show that IB-ThDec can be applied to the threshold key escrow and the mediated cryptosystems.     

噻二唑二聚物/丁氧基三乙二醇复合物的合成

合成了噻二唑二聚物/丁氧基三乙二醇复合物。反应物的摩尔比及反应温度影响产物作为添加剂加入到润滑脂中的抗烧结性能。在最佳反应条件下,即n(噻二唑二聚物)∶n(丁氧基三乙二醇)=0.5∶1.0,反应温度125℃时,产率为85%。通过分子模拟、红外光谱、13C核磁共振及N、S元素的含量测定,探讨了产物的结构及反应机理。结果表明,噻二唑二聚物与丁氧基三乙二醇的摩尔比越大,在金属表面形成配位的噻二唑环的个数就越多,就会表现出更强的吸附特性,从而表现出更高的抗烧结性能。     

多路温度转换器在长庆石化公司的应用

介绍了MTL800系列多路温度转换器在长庆石化公司的具体应用,并对MTL800系列温度转换器的特点做了描述。     

龙桥水电站大坝安全监测成果初步分析

简述了龙桥水利水电枢纽安全监测工程监测设备的施工工艺和监测成果的整编方法,对监测成果进行了初步分析,成果表明:坝基温度偏高,基岩变形较小,坝体混凝土温度及诱导缝的张开有利于蓄水前的封拱灌浆,坝体应力应变状态良好.     

STUDY ON THE COAL DESULFURIZATION BY DILUTE ALKALI / ACID TREATMENT AND ITS MECHANISM

Sulfur in coal causes problems in coal processing and utilization, therefore the chemical beneficiation of coal has gained widespread attention. Using three coal samples with high sulfur content the effect of desulfurization has been studied. For Nantong coal containing 4.25% total sulfur under the condition sulfur reduction increased from 38.8% upto 62.4% the released sulfur was generally sulfate and pyrite, but the organic sulfur almost remained constant. When alkali treatment was performed at 370^°C, organic sulfur removal of Donglin and Yanzhou coal was to 50.6% and 57.3% respectively.     

Titanium alloys in total joint replacement--a materials science perspective

Increased use of titanium alloys as biomaterials is occurring due to their lower modulus, superior biocompatibility and enhanced corrosion resistance when compared to more conventional stainless steels and cobalt-based alloys. These attractive properties were a driving force for the early introduction of alpha (cpTi) and alpha + beta (Ti-6A1-4V) alloys as well as for the more recent development of new Ti-alloy compositions and orthopaedic metastable beta titanium alloys. The later possess enhanced biocompatibility, reduced elastic modulus, and superior strain-controlled and notch fatigue resistance. However, the poor shear strength and wear resistance of titanium alloys have nevertheless limited their biomedical use. Although the wear resistance of beta-Ti alloys has shown some improvement when compared to alpha + beta alloys, the ultimate utility of orthopaedic titanium alloys as wear components will require a more complete fundamental understanding of the wear mechanisms involved. This review examines current information on the physical and mechanical characteristics of titanium alloys used in artifical joint replacement prostheses, with a special focus on those issues associated with the long-term prosthetic requirements, e.g., fatigue and wear.     

Angiotensin II stimulates cardiac myocyte hypertrophy via paracrine release of TGF-beta 1 and endothelin-1 from fibroblasts

We examined the effects of different cytokine combinations and culture conditions on the expansion and modulation of cell surface antigens of CD34+ derived dendritic cells (DCs), the most efficient antigen-presenting cells capable of stimulating resting T cells in the primary immune response. Cells with a dendritic morphology and expressing HLA-DR, CD1a, S100 and CD83 were maximally expanded under serum-free conditions with the addition of SCF, GM-CSF, TNF-alpha, TGF-beta and Flt-3 ligand (fold increase of CD1a+ cells = 102 +/- 32 after 2 weeks of culture). CD34+ cells were also grown under continuous flow conditions in an artificial capillary system: after 14d of culture, the expansion in the total cell number was lower than that of the static cultures (3.3 +/- 2 v 18.9 +/- 4) but the percentage of CD1a+/CD83+/ CD80+ cells was considerably higher, whereas the CD14+ cells were significantly reduced (8.9 +/- 2 v 26 +/- 13). In continuous perfusion cultures, low levels of DC precursors and of LTC-IC were still present up to day 14. The DCs generated under flow conditions stimulated the mixed leucocyte reaction (MLR) more than the cells grown in static cultures. By electron microscopy, cells grown in the continuous flow system showed an increased number of large cells with numerous dendritic processes and abundant multilamellar complexes. The cells expanded under these conditions were sorted on the basis of their light-scatter properties into two fractions: one containing a predominance of CD1a+/S100+/ CD8 3+/CD80+/CD14- 'large cells' with great internal complexity (mature DCs); the second including 'small cells' either CD33+/CD14+, CD33+/CD15+ or CD33+/CD13-/CD14. The DCs generated and selected with this method are therefore particularly well suited for immunotherapeutic protocols.     

陶瓷模用α半水石膏的研究

理论上提出了影响陶瓷模用半水石膏常，高温性能的主要因素，即结晶形态．标准稠水度，初凝时间，抗折强度，进行了实验验证，确定了相应的制作技术，获得了性能优良的陶瓷模用α半水石膏。