Effect of postnatal exposure to a PCB mixture in monkeys on multiple fixed interval-fixed ratio performance

Behavioral impairment as a consequence of PCB exposure beginning in utero has been reported in both humans and animals. The present study assessed the behavioral consequences of postnatal exposure to PCBs. Male monkeys (Macaca fascicularis) were dosed from birth to 20 weeks of age with 7.5 microgram(s)/kg/day of a PCB mixture representative of the PCBs typically found in human breast milk (eight monkeys) or vehicle (four monkeys). At 4 years of age, performance under a multiple fixed interval (FI)-fixed ratio (FR) schedule of reinforcement was assessed. The FI component was more sensitive to disruption as a result of PCB exposure than was the FR component. PCB-exposed monkeys displayed shorter mean interresponse times (IRTs) than controls, particularly during the earlier sessions of the experiment. Similarly, the increase in pause time characteristic of the acquisition of typical FI performance emerged more slowly across sessions in the PCB-treated group. However, the number of short IRTs (less than 5 s) remained greater in the treated group compared to controls over the 48-session duration of the experiment. On the FR component, control monkeys decreases the mean pause time across sessions whereas the PCB-treated group did not; there were no differences between groups for absolute value of average IRT or pause time. The results of this study extend previous research in this cohort of monkeys, and provide further evidence that PCB exposure limited to the early postnatal period and resulting in environmentally relevant body burdens produces long-term behavioral effects.     

Mathematical and experimental method to obtain the inverse modeling of nonsinusoidal and saturated synchronous reluctance motors

This paper presents new inverse modeling for synchronous reluctance motor (SyRM). This modeling is valid when the inductances are sinusoidal or nonsinusoidal and even when the machine is saturated. This technique involves the generation of constant torque curves as a function of two-phase currents in the Concordia's reference frame when the rotor angle is fixed. We also introduce an experimental method to obtain directly the inverse modeling. This practical method takes into account the saturation of the motor. This technique allows the reduction of the low torque ripple in the case of nonsinusoidal inductances.     

Concentration-response relationships for adenosine agonists during preconditioning of rabbit cardiomyocytes

Although adenosine receptors have been implicated in the induction of preconditioning in a variety of experimental models, there is controversy concerning the specific adenosine receptor subtypes mediating this effect. Concentration-protection relationships for adenosine and adenosine agonists in rabbit cardiomyocytes were used to characterize the role of adenosine receptor subtypes in preconditioning. Isolated cells were ischemically preconditioned or pre-incubated for 10 min with increasing concentrations of adenosine, CCPA (2-chloro-N6-cyclopentyladenosine), APNEA (N6-2-(4-aminophenyl)ethyladenosine), or BNECA (N6-benzyl-5'-N-ethyl-carboxamidoadenosine) in the presence or absence of 1 or 10 microM of the selective A1-adenosine antagonist DPCPX (8-Cyclopentyl-1,3-dipropylxanthine). Following a 30-min post-incubation period, cells were pelleted, layered with oil and ischemically incubated for 180 min. Injury was assessed by osmotic swelling and trypan blue exclusion of sequential samples, and determination of the areas beneath the mortality curves. Adenosine produced a broad concentration-protection curve which was displaced to the right by DPCPX. The curve for A1-selective agonist CCPA was biphasic, with an initial response below 1 nM and a second above 1 microM. DPCPX abolished the early response leaving a steep monophasic curve between 0.1 and 10 microM CCPA. The APNEA curve appeared moriophasic, the major slope occurring between 1-100 nM; DPCPX (1 microM) shifted the concentration-response curve approximately 30-fold and decreased the slope. Adenosine receptor agonist BNECA produced preconditioning characterized by a shallow monophasic concentration-protection curve with a maximal effect of 49% and an EC50 of approximately 5 nM; DPCPX shifted the BNECA concentration-protection relationship approximately 40-fold with only a modest increase in slope. Analysis of the data suggests that induction of preconditioning results from interaction of agonists with the A1 receptor and a second adenosine receptor having properties consistent with the A3 receptor. Adenosine, CCPA, APNEA, BNECA and DPCPX each appear to be selective for the A1 adenosine receptor subtype in isolated rabbit cardiomyocytes.     

Comparison of physical property-porosity behaviour with minimum solid area models

An extensive survey of the porosity dependence of (room temperature) physical properties shows that mechanical properties and electrical and thermal conductivity, i.e. properties dependent on the local flux or fields in the material, follow minimum solid area models. This is shown extensively for elastic properties and tensile (flexure) strength, but consistency with other properties, e.g. compressive strength, hardness, electrical and thermal conductivity is also shown. Although data for ceramics is most extensive, data for rocks, metals, and carbon are included, since the consistency of these, especially of metals with ceramics, provides important support for the minimum solid area concept. While porosity characterization is generally minimal, expected model trends with pore character are corroborated by correlating processing and resultant expected pore character with porosity-property results. It is argued that properties dependent on mass should be better fit by a linear, i.e. rule of mixture, relationship between such properties and porosity. Support for this is shown in dielectric constant-porosity data.     

When 3-year-olds pass the appearance–reality test.

68 3-yr-olds received a standard appearance–reality task along with either a trick task, in which the appearance question was placed in the context of a deceptive game, or a reduced information processing task, in which a dual object (e.g., a sponge-rock) was presented along with an object that matched the dual object's identity (a sponge) and one that matched the dual object's appearance (a rock). Children were more likely to pass either the trick or reduced information processing task and fail the standard than the reverse. Thus, 3-yr-olds can grasp the distinction between appearance and reality (a) when their goal is to trick someone, which may prime them to think about the other's mental state, and (b) when they do not need to hold conflicting object identities in mind at the same time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A REVIEW OF PRODUCTION PLANNING AND SCHEDULING MODELS IN THE SEMICONDUCTOR INDUSTRY PART I: SYSTEM CHARACTERISTICS, PERFORMANCE EVALUATION AND PRODUCTION PLANNING

Although the national importance of the semiconductor industry is widely acknowledged, it is only recently that the production planning and scheduling problems encountered in this environment have begun to be addressed using industrial engineering and operations research.techniques. These problems have several features that make them difficult and challenging: random yields and rework, complex product flows, and rapidly changing products and technologies. Hence their solution will contribute considerably to die theory and practice of production planning and control. In a two-part project we present a review of research in this area to date, discuss the applicability of the various approaches and suggest directions for future research. In this paper, Part I, we describe the characteristics of the semiconductor manufacturing environment and review models related to performance evaluation and production planning. Part II will review research on shop-floor control in this industry to date.     

Sociodemographic factors and the variation in syphilis rates among US counties, 1984 through 1993: an ecological analysis

OBJECTIVES: Syphilis in the United States is focally distributed, with high incidence rates in the South and in metropolitan areas nationwide. In this study an ecological analysis, using the county as the unit of analysis, was performed to generate hypotheses about community-level determinants of syphilis rates. METHODS: Bivariate rank correlations and multivariate, backward stepwise elimination linear regressions were performed. Mean annual incidence of primary- and secondary-stage syphilis in a county was the dependent variable, and county sociodemographic characteristics (from census data) were the independent variables. RESULTS: In the multivariate regression model, sociodemographic characteristics accounted for 71% of the variation in syphilis rates among counties. With other factors accounted for, the most highly correlated characteristics were percentage non-Hispanic Black population, county location in the South, percentage of the population that was urban, percentage Hispanic population, and percentage of births to women younger than 20 years. CONCLUSIONS: Most of the variation in syphilis rates among counties is accounted for by sociodemographic characteristics. Identification and remediation of modifiable health determinants for which these factors are markers are needed to improve the health status of these populations.     

An analysis of the coupling of an injection laser diode to a planar LiNbO3waveguide

Calculated butt coupling efficiency between a GaAlAs double heterostructure laser and a single-mode LiNbO3Ti-diffused optical waveguide is presented in this paper as a function of the transverse displacement, the angular alignment, the longitudinal separation between the laser and the waveguide end surfaces, the radiation field of the laser diode and its dependence on the laser diode structure, and the mode profile of the waveguide and its dependence on experimental diffusion parameters. The maximum efficiency is less than 40 percent because of the mismatch between the waveguide mode and the laser radiation, caused primarily by the experimental limitations in their structures. The effect of the reflection of the waveguide end surface on the laser oscillation has also been estimated.