用瞬时法测定液体导热系数

以珠状热敏电阻为加热元件,建立了用瞬时法测定液体导热系数的装置,在25℃下用乙二醇等7个标准样品,对该装置进行了标定,平均偏差为2%.为了核实装置和所得关系式的可靠性,又测定了13个已知导热系数的样品,多数偏差在2%以内,最大偏差为5%.单次测量的精度为0.2%.本文叙述了这一方法的原理,并对实验结果进行了讨论.     

原子吸收光谱法测定生产金刚石电解触媒废液沉渣中的锰

通过正交实验确定了利用原子吸收分光光度法测定锰的最佳测试条件,并测定了生产金刚石电解触媒废液沉渣中的锰含量,实验准确度和精密度较高,适合工业快速分析.     

Modeling and global trajectory tracking control for an over-actuated MAV

This paper deals with an original micro aerial vehicle (MAV) design, the Omnicopter MAV. It has two central coaxial rotors with fixed-pitch propellers and three perimeter mounted ducted fans with servo motors performing thrust vectoring. Compared with traditional rotary wing MAVs that have inherent underactuation, the Omnicopter possesses some advantages in mobility, for example, lateral translation with zero attitude and hover with nonzero attitude. The trajectory tracking control design, global stability analysis, and control allocation are demonstrated through numerical simulation. The advantage of zero attitude translation is illustrated through experimental results.     

A new gear fault feature extraction method based on hybrid time–frequency analysis

Gear is one of the popular and important components in the rotary machinery transmission. Vibration monitoring is the common way to take gear feature extraction and fault diagnosis. The gear vibration signal collected in the running time often reflects the characteristics such as non-Gaussian and nonlinear, which is difficult in time domain or frequency domain analysis. This paper proposed a novel gear fault feature extraction method based on hybrid time–frequency analysis. This method combined the Mexican hat wavelet filter de-noise method and the auto term window method at the first time. This method can not only de-noise noise jamming in raw vibration signal, but also extract gear fault features effectively. The final experimental analysis proved the feasibility and the availability of this new method.     

种子法制备聚合物乳液技术的进展

从建筑乳液的生产现状、自生种子法与外加种子法的区别、种子乳液的特点及外加种子法生产的乳液特性等方面介绍了种子法制备乳液技术的进展。     

The effect of radical desorption on the particle size distribution in vinyl acetate emulsion polymerization

The effect of free radical desorption is studied by using a mathematical model of particle size distribution in continuous emulsion polymerization. By comparing the theoretical prediction with experimental data, the value of D_o for the vinyl acetate (VAc) system is best chosen as 0.19 × 10^?7 cm²/h. The effect of radical desorption as well as mean residence time on the absolute particle size distribution, total concentration of polymer particles, conversion, and average number of radicals per polymer particle are analyzed by the model proposed.     

Effect of particle size on the surface oxidation and flotation behavior of galena particles in lime system

ABSTRACT

In this research, the effect of particle size on the surface oxidation and flotation behavior of galena in the lime system was studied. Coarse (?0.074 + 0.038 mm), intermediate (?0.038 + 0.025 mm) and fine (?0.025 mm) galena particles were used in the experiment. The dissolution tests, flotation tests, and sorption tests were accomplished. Through further analysis by XPS, the effect of particle size and lime was observed. The decrease of mineral particle sizes increased the adsorption ratio of collector and the dissolution of galena, while the hydrophilic product OH^?/Ca(OH)⁺ produced by dissolution occupied the dominant position, which led to the minerals hydrophilic.     

The influence of resin characteristics on the high speed melt spinning of isotactic polypropylene. II. On-line studies of diameter,birefringence, and temperature profiles

An investigation was carried out of the high speed melt spinning of three polypropylene resins with melt flow indices of 12, 35, and 300. On-line measurements were made of diameter, birefringence, and temperature as a function of distance from the spinneret for a range of spinning conditions for each polymer. A plateau (decrease of cooling rate) in the temperature profile was associated with the occurrence of crystallization in the spinline. The position of this plateau correlated with a rapid rise in the birefringence profile and a rapid decrease in the rate of drawdown in the diameter profile. The temperature and birefringence profiles were used to determine the temperature and position on the spinline at which the onset of crystallization occurred. It was found that the position and temperature of crystallization onset varied considerably with changes in take-up velocity, extrusion temperature, and resin melt index (weight average molecular weight). The crystallization onset occurred nearer the spinneret and at higher temperatures with (1) an increase of take-up velocity, (2) a decrease of extrusion temperature, or (3) a decrease of resin melt flow index. An analysis was carried out to estimate the rate of stress development with distance along the spinline; the results were also used to estimate the stress at the onset of crystallization for each spinning condition. It was concluded that the observed behavior could be attributed to the role of spinline stress in producing molecular orientation and consequent increase of crystallization rate.     

半参数广义线性模型惩罚似然估计的几个性质

本文在给出了半参数广义线性模型惩罚似然估计及惩罚准似然估计的基础上,得到了下面几个性质:(Ⅰ)极小惩罚似然估计及惩罚准似然估计等价于惩罚加权最小二乘估计;(Ⅱ)估计的收敛性及加速收敛法;(Ⅲ)估计的一种 Bayes 解释。     

Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.