Stability of microencapsulated lactic acid bacteria under acidic and bile juice conditions

The probiotic strains Lactobacillus brevis CCMA1284 and Lactobacillus plantarum CCMA0359 were microencapsulated by spray drying using different matrices – whey powder (W), whey powder with inulin (WI) and whey powder with maltodextrin (WM). Viability of the microencapsulated strains in acid and bile juices and during 90 days of storage (seven and 25 °C) was evaluated. The two strains exhibited high encapsulation efficiency (> 86%) by spray drying. The different matrices maintained L. plantarum viability above six log CFU g⁻¹ at 7 °C for 90 days, whereas similar results for L. brevis were observed only for W. The use of inulin as matrix of encapsulation did not enhance bacterial viability in the evaluated conditions. In general, the use of W and WM as matrices was effective for L. plantarum viability. However, only W was effective for L. brevis in the evaluated conditions. The spray drying technique was successfully adopted for the encapsulation of L. plantarum CCMA0359 and L. brevis CCMA1284 strains.     

A feasibility study of Lactobacillus plantarum in fruit powders after processing and storage

The aim of this study was to develop fruit powders (apple, banana and strawberry) enriched with a probiotic strain (Lactobacillus plantarum 299v). Two methodologies were proposed: (i) drying of the fruit with probiotic culture incorporated (by convection) or (ii) drying of fruit (by convection) and addition of spray‐dried probiotic culture. In the first methodology, processing caused a notable reduction in probiotic viable counts in apple, but this reduction was lower during drying of banana and strawberry. A large reduction in viable cells was also recorded during storage. In the second methodology, the survival of L. plantarum 299v was considerably higher during spray‐drying, and fruit powders with a microbial content suitable for a probiotic food (10⁸–10⁹ cfu g^?1) were obtained. The fruit powders incorporating L. plantarum 299v can be stored at 4 °C or at room temperature, for at least 3 months. This preliminary study demonstrated that fruit powders are good carriers of probiotic cultures, but the techniques used to produce them should be carefully considered.     

Synthesis and Photopolymerization of Tween 20 Methacrylate/N-vinyl-2-Pyrrolidone Blends

Poly(oxyethylene 20 sorbitan) monolaurate (Tween® 20) methacrylates were synthesized by coupling methacryloyl chloride (MeOCl) to Tween 20 in the presence of 4-(N,N-dimethylamino) pyridine, using THF as a solvent, in order to investigate their suitability as precursors for photopolymerizable hydrogels in tissue engineering applications. The degree of substitution could be controlled by adjusting the molar ratio of MeOCl and Tween 20, giving three different monomers: Tween 20 monomethacrylate, Tween 20 dimethacrylate and Tween 20 trimethacrylate. Combined ¹ H NMR and MALDI-TOF MS confirmed these monomers to be of high purity and to have polydispersities less than 1.3. It was shown that aqueous solutions of the monomers were photoactive, all the methacrylate groups reacting within 30 minutes exposure to a UV light intensity of 145 mW/cm². Aqueous Tween 20 trimethacrylate was then combined with N-vinyl-2-pyrrolidone (NVP), giving tough copolymer hydrogels on photopolymerization, whose swelling ratios and swelling rates could be tuned by varying the Tween 20 trimethacrylate content. The use of a flexible spacer with a multifunctional monomer gives a permanent three-dimensional network, whilst maintaining degrees of swelling of between 60 and 85%, with potential for a wide range of biological and non-biological applications.     

Carbonation durability of blended cement pastes used for waste encapsulation

Blended cement pastes are currently used for encapsulation of low level and intermediate level nuclear waste in the UK. However, there is still little information on the long-term durability of those mixes to some chemical attacks. Accelerated testing may predict the long-term durability or at least help the selection of more durable formulations. In this work, blended blastfurnace slag (BFS)/Portland cement (OPC) pastes containing 60, 75 and 90% BFS and pulverised fuel ash (PFA)/OPC pastes with 40, 55 and 75% PFA were cured at 20 and 60°C for 90 days then submitted to natural and accelerated carbonation (5% CO₂). The effects of the curing temperature as well as the OPC replacement level on the carbonation ratio are presented. Results showed a good correlation between natural and accelerated carbonation for the pastes studied. Carbonation was found to be governed by the amount of calcium hydroxide available in the mixes before the process started.     

Characterization of Microencapsulated Rosemary Essential Oil and Its Antimicrobial Effect on Fresh Dough

This study aimed to characterize rosemary essential oil particles obtained by spray-drying and to evaluate their antimicrobial activity. Measurements of mycelial growth of Penicillium and Aspergillus fungi, isolated from fresh dough, were made applying oil concentrations of 1.0, 5.0, 10.0, 20.0, and 50.0 μL/mL. Fungi and yeast counts in the fresh dough submitted to the control (no oil), pure oil, and microencapsulated oil treatments were also conducted. The microcapsules showed 50 % oil retention after drying, and the major oil components identified were 1,8-cineole (29.0 %), camphor (26.6 %), and α-pinene (10.6 %). The analysis of the particles revealed surfaces without fissures, with a mean particle size of 12.2 μm and presenting an amorphous structure. The growth inhibiting effect of Penicillium sp. fungus, compared to the control, was verified at concentrations of 1.0, 5.0, and 10.0 μL/mL rosemary essential oil, which did not differ among them. For Aspergillus sp., the application of 10.0 μL/mL oil provided greater inhibition compared to 1.0 and 5.0 μL/mL. Complete inhibition occurred with the application of 50.0 μL/mL for both fungal genera tested. At 8 days of dough storage at 25 °C, a decrease of at least 0.7 and 1.5 log cycles of fungal growth was observed in the dough with pure oil and that with microencapsulated oil, respectively, relative to the control. The microencapsulation process retained the antimicrobial property of rosemary essential oil and provided further extension of this activity over time when applied to fresh dough.     

Target tracking of autonomous robotic vehicles using range‐only measurements: a switched logic‐based control strategy

This paper considers the pursuing or target tracking problem where an autonomous robotic vehicle is required to move towards a maneuvering target using range‐only measurements. We propose a switched logic‐based control strategy to solve the pursuing problem that can be described as comprising a continuous cycle of two distinct phases: (1) the determination of the bearing, and (2) the steering control of the vehicle to follow the direction computed in the previous step while the range is decreasing. We provide guaranteed conditions under which the switched closed‐loop system achieves convergence of the relative distance error to a small neighborhood around zero. Simulation results are presented and discussed.Copyright © 2011 John Wiley & Sons, Ltd.     

Anaerobic methane oxidation and aerobic methane production in an east African great lake (Lake Kivu)

We investigated CH₄ oxidation in the water column of Lake Kivu, a deep meromictic tropical lake with CH₄-rich anoxic deep waters. Depth profiles of dissolved gases (CH₄ and N₂O) and a diversity of potential electron acceptors for anaerobic CH₄ oxidation (NO₃^?, SO₄^2?, Fe and Mn oxides) were determined during six field campaigns between June 2011 and August 2014. Denitrification measurements based on stable isotope labelling experiments were performed twice. In addition, we quantified aerobic and anaerobic CH₄ oxidation, NO₃^? and SO₄^2? consumption rates, with and without the presence of an inhibitor of SO₄^2?-reducing bacteria activity. Aerobic CH₄ production was also measured in parallel incubations with the addition of an inhibitor of aerobic CH₄ oxidation. The maximum aerobic and anaerobic CH₄ oxidation rates were estimated to be 27?±?2 and 16?±?8?μmol/L/d, respectively. We observed a difference in the relative importance of aerobic and anaerobic CH₄ oxidation during the rainy and the dry season, with a greater role for aerobic oxidation during the dry season. Lower anaerobic CH₄ oxidation rates were measured in presence of molybdate in half of the measurements, suggesting the occurrence of linkage between SO₄^2? reduction and anaerobic CH₄ oxidation. NO₃^? consumption and dissolved Mn production rates were never high enough to sustain the measured anaerobic CH₄ oxidation, reinforcing the idea of a coupling between SO₄^2? reduction and CH₄ oxidation in the anoxic waters of Lake Kivu. Finally, significant rates (up to 0.37?μmol/L/d) of pelagic CH₄ production were also measured in oxygenated waters.     

Correlation Between Chemical Composition and Adherence of Cr and Co Coatings Deposited by Electric Arc

This paper presents the adhesive strength of FeCr and FeCoCr coatings produced by electric arc thermal spray process on carbon steel plates. Carbon steels are not resistant to corrosion and several methods are used in surface engineering to protect them from aggressive environments such as the marine one. The main objective of this work is the evaluation of the mechanical and metallurgical properties of coatings produced by thermal spray on carbon steel. Five chemical compositions were tested in order to give a large panel of possibility. Coatings were characterized by several methods to result in a screening of performance. The physical properties of coatings were also evaluated by adhesion quantification, using pull-off test, and microhardness measurement. The assessment of microstructural morphology by X-ray diffraction (XRD) and scanning electron microscopy (SEM) was made. The open circuit potential was monitored to evaluate the corrosion tendency. SEM results showed uniformity in the deposited layer and low amount of oxide and porosity. The adhesive strength of FeCoCr alloy coatings was higher than other coating conditions. In the immersion test, all sealed conditions presented high corrosion potential. Semi-quantitative phase calculation was performed by the Rietveld method using XRD. The presence of FeCr, FeCo, and austenite phases was determined. Based on the performed characterizations, the findings suggested that the FeCrCo deposition, with an epoxy sealing, is suitable to be used as an efficient coating of carbon steel in aggressive corrosive environments.     

Biocompatibility and cutaneous reactivity of cellulosic polysaccharide film in induced skin wounds in rats

The development of a skin substitute suitable for immediately performing the function of the lost dermis and epidermis could result in a positive impact on the treatment of patients with extensive skin lesions. A biopolymer film was applied to skin wounds to investigate the biocompatibility and cutaneous reaction and to test its activity as a mechanical barrier and conductor in the healing process. Forty Wistar rats of both sexes were used in the present study. Two excisions were performed in the dorsal part of the skin flaps. The polysaccharide film was applied over one of the incisions and other incision was washed with saline. The time spent for complete healing of both lesions was virtually the same in both groups, during 21 days of observation. The film remained attached to the bed of the exposed wound for an average period of 6 days. There were no statistically significant differences with regard to lesion measurement area at assessment times of 2nd, 7th and 14th postoperative days. At day 21, the scar area showed a significant difference (0.0229). After 40 days, all wounds were completely healed. No statistically significant differences were found between the histological parameters assessed in the experimental and control groups. The cellulosic polysaccharide film integrated well with the tissue showing high biocompatibility and low skin reactivity.