Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior

The effects of porous ceramic plates on the thermal behavior of ventilated façades were evaluated, and the results are presented herein. Thermal behavior in a ventilated façade of specimens containing 40 wt% of lime mud and a firing temperature of 1100°C was evaluated and compared with a commercial porcelain ceramic tile, which was the reference material. An experimental apparatus was designed to evaluate the thermal performance of the studied ventilated façades. The results revealed that the ventilated façade composed of the studied porous ceramic tiles produced a greater reduction in temperature between the external environmental and the interior of a box representing a building (ΔT5) of 65.7°C, compared with the façade composed of the commercial porcelain ceramic tiles (ΔT5 = 56.0°C) and even the traditional façade (ΔT5 = 49.1°C). Thus, porous ceramic tiles based on byproducts are promising candidates for ventilated façade systems.     

NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

Kinetics of the Initial Stage of Sintering from Shrinkage Data: Simultaneous Determination of Activation Energy and Kinetic Model from a Single Nonisothermal Experiment

A new method for the kinetic analysis of the initial stage of sintering for constant-heating-rate data has been proposed. Unlike all of the methods previously reported in the literature, this new method proposed here allows the simultaneous determination of the activation energy and the kinetic model from a single dilatometric curve recorded under a linear-heating-rate program. The proposed method has been tested with simulated sintering curves and experimental results have been obtained for the sintering of a rutile sample.     

Study of the polymerization of 1-octadecene with different rnetallocene catalysts

Summary 1-Octadecene (C18) was polymerized by using different metallocene catalysts. The rac-Et(Ind)₂ZrC1₂/MAO (I) and rac-Me₂Si(Ind)₂ZrC1₂/MAO (III) presented the highest activity as compared with ra-Et(2-Me-Ind)₂ZrCl₂/MAO (II) and Ph₂C(Flu)(Cp)ZrC1₂/MAO (IV) catalysts. Catalyst IV produced polymers with highest molecular weights. The microstructure of the polymers was determined by ¹³C-NMR spectroscopy. Catalyst systems I, II and III produced isotactic polymers while catalyst IV produced polymers with mainly syndiotactic structures but with large amount of stereoregular error. Received: 21 June 2002/Revised version: 4 November 2002/ Accepted: 4 November 2002     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.     

Styrene-butadiene branched star-shaped asphalt modifiers: Synthesis and mechanical characterization

Abstract

The synthesis and the corresponding characterization of styrene-butadiene (SB), branched, star-shaped copolymers was investigated as part of a research project on asphalt modification using polymers with precise molecular structures. The method of anionic polymerization was followed to prepare samples of block copolymers of SB, a synthesis method that controls chain-architecture, molecular weight distribution, monomer distribution, and the average molecular weight. The research studies are the synthesis of block copolymers including linear, three- and four-arms constructs, depending on the coupling agent used. The techniques of nuclear magnetic resonance (1NMR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and rheology were carried out to characterize the copolymers. From the results of the 1NMR, DSC, and GPC analyses, all star-shaped copolymers investigated showed a similar block copolymer composition. Furthermore, the rheological behavior of one of the synthesized star-shaped copolymers was nearly the same as a four-branched commercial copolymer. Rheologically, the four-arm block copolymer sample had the largest storage modulus (G′) among the branched copolymers synthetized, indicating that such architecture produces a highly structured material. In regard to polymer-modified asphalt formulations, the three-branched copolymer architecture yielded better elastic behavior than the four-branch version. In summary, the findings of this investigation provide new insight about a polymer system that may offer advantages in industrial asphalt paving applications.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Generation and Selection of Abductive Explanations for Non-Omniscient Agents

Among the non-monotonic reasoning processes, abduction is one of the most important. Usually described as the process of looking for explanations, it has been recognized as one of the most commonly used in our daily activities. Still, the traditional definitions of an abductive problem and an abductive solution mention only theories and formulas, leaving agency out of the picture. Our work proposes a study of abductive reasoning from an epistemic and dynamic perspective. In the first part we explore syntactic definitions of both an abductive problem in terms of an agent’s information and an abductive solution in terms of the actions that modify the agent’s information. We look at diverse kinds of agents, including not only omniscient ones but also those whose information is not closed under logical consequence and those whose reasoning abilities are not complete. In the second part, we look at an existing logical framework whose semantic model allows us to interpret the previously stated formulas, and we define two actions that represent forms of abductive reasoning.     

Improving process models by mining mappings of low-level events to high-level activities

While it is possible to analyze the run-time behavior of a business process through process mining techniques, in practice there is often a gap between the low-level nature of the events recorded in an event log and the high-level of abstraction at which the process is modeled. This makes it difficult to understand the recorded behavior in terms of the high-level activities in the process model. Also, it makes it difficult to improve the model based on run-time data about the process. In this work we present an approach to mine mappings between the events in the log and the activities in the model. These mappings can be used to generate suggestions of how the process model can be extended in order to capture the behavior recorded in the event log. Using a real-world and publicly available event log, we show how the approach can improve the model in a stepwise manner, until it covers all the behavior recorded in the event log.