Validation of 3-D curved objects: CAD model and fabricatedworkpiece

This paper proposes a new method to describe and identify a 3-D curved object for the purpose of validating a fabricated object to the design specification. Curved 3-D objects are, in general, difficult to represent and identify because they lack distinct properties such as edges, planes, or cylindrical surfaces which are the building blocks in representing objects. In this paper, the authors propose to use principal axes of a 3-D object to establish a reference for the representation. A method of obtaining an inertia matrix from a 3-D range image is developed. The unique set of principal axes is obtained from the inertia matrix of an object with an arbitrary 3-D position and orientation, and the object can be described uniquely on these principal axes. On the principal axes, an object is described by a set of features describing the shape of the object such as spine, section size, section orientation, and section contraction. The features are used for comparing two objects for the validation purpose. The authors also propose a direct measure of similarity between two objects as a mean-squared difference of radii. As an experiment, two 3-D object models are designed through a CAD package, and fabricated objects are compared with the designed models for validation purposes     

攀钢“501”滑动水口液压驱动系统的研制

介绍了为攀钢“５０１”滑动水口研制的专用液压驱动系统，对该系统的工作原理，性能特点，主要元件（设备）的选择原则等作了较为详细的说明介绍。     

我国煤炭生产的环境问题及其对策研究

论文分析了我国煤炭生产中所存在的环境问题 ,并提出采取应用全面绿色管理、贯彻实施ISO14 0 0 0系列标准及推广应用清洁生产等对应措施和方法。其中全面绿色管理是作者首次提出的全新概念。     

BIMORPH PIEZOELECTRIC ACTUATOR FOR SMALL PIPE ROBOT

An experimental bimorph piezoelectric element (PZT) actuator for small pipe robot is developed. The robot can move in φ20 mm pipe, and can carry a CCD camera for detecting cracks or fine holes on inner surface of pipe. The velocity of the robot can reach 17～22 mm/s for vertical pipe up/down, respectively. Moving principle and its performance characteristics are presented.     

冷41-平14"L"型水平井轨迹优化与控制技术

冷41-平14井受地面条件的限制,靶前位移小,为保证中间套管和完井管柱的顺利下入,剖面设计为“反向造斜-稳斜-降斜-正向造斜-水平段”的“L”型。简要介绍了冷41-平14“L”型水平井的设计概况,详细介绍了该井井眼轨道优化设计原则和设计结果,以及实钻井眼轨迹连续控制技术。该井精确命中A、B靶,两靶处的井斜角、方位角和垂深等达到了设计要求,在A靶实现了软着陆。该井井眼轨道优化设计和井眼轨迹控制技术为类似水平井的井眼轨道设计和轨迹控制提供了有益的借鉴。     

High voltage (>1kV) and high current gain (32) 4H-SiC power BJTs using Al-free ohmic contact to the base

This letter reports the design and fabrication of 4H-SiC bipolar junction transistors with both high voltage (>1kV) and high dc current gain (/spl beta/=32) at a collector current level of I/sub c/=3.83A (J/sub c/=319 A/cm/sup 2/). An Al-free base ohmic contact has been used which, when compared with BJTs fabricated with Al-based base contact, shows clearly improved blocking voltage. A specific on-resistance of 17 m/spl Omega//spl middot/cm/sup 2/ has been achieved for collector current densities up to 289 A/cm/sup 2/.     

Fabrication and characteristics of high-speed implant-confined index-guided lateral-current 850-nm vertical cavity surface-emitting lasers

Process technology of high-speed implant-apertured index-guide lateral-current-injection top dielectric-mirror quantum-well 850-nm vertical cavity surface-emitting lasers (VCSELs) has been developed. Oxygen and helium implantation for aperture definition and extrinsic capacitance reduction, dielectric mirror formation, p- and n-ohmic contact formation, VCSEL resistance, and thermal analysis were investigated. Employing this technology, GaAs/AlGaAs-based 850-nm VCSELs with small signal modulation bandwidths up to 11.5 Gb/s and an eye diagram generated at 12 Gb/s by a pseudorandom bit sequence of 2/sup 31/-1 were achieved. The bit-error rates were below 10/sup -13/. The threshold current is as low as 0.8 mA for 7-/spl mu/m-diameter current apertures and typical slope efficiencies of 0.45-0.5 mA/mW were obtained.     

用屏蔽暂堵技术封堵水平井裂缝性漏层

克拉玛依油田HW702水平井的大斜度段和水平段,将穿越纵向裂缝发育的二叠系佳木河组储层。为安全钻进和保护油层,用超细碳酸钙和磺化沥青复配后加入复合离子钻井液中成屏蔽暂堵的堵漏钻井液。室内用岩心试验,屏蔽暂堵后渗透率可降为0,暂堵深度小于3cm,可用酸化和射孔解堵。现场使用效果也很好,使HW702水平井顺利完钻,并获得工业油气流。