煤岩破裂微震信号的小波特征能谱系数分析法

煤岩破裂微震信号是一种时变非平稳信号,具有不可预知性和突发瞬态性,为了提取能够表征微震源信息的有效特征,基于小波理论,选取了适合微震信号的小波基函数,并根据采样定理及Mallat算法确定了小波分解最大尺度,提出了用小波特征能谱系数分析煤岩破裂微震信号波形的状态分析方法。实验结果表明,微震信号与噪声信号有明显不同的小波特征能谱系数分布特征,而且可利用提取的能谱系数作为特征向量表示信号特征。这对于抑制微震信号的不稳定性和同频段的干扰信号,以及后续的特征编码非常有利,为实现煤岩破裂微震信号实时的模式识别打下了重要基础。     

永磁体嵌入式同步电机的构造及控制

永磁伺服电机的设计与开发是目前的热点之一，永磁体嵌入式同步电机（IPMSM），以其独有的特性正日益受到关注。文章对IPMSM的转子构造进行分析，提出最大转矩／电流控制方法。     

协同式神经网络的识别性能分析

本文对一类全新的神经网络——协同式神经网络的性能进行了研究.在介绍了模式识别协同式神经网络原理的基础上,进一步分析了离散协同网络的识别稳定性及识别率,并与传统神经网络——Hopfield网络在汉字图像识别方面进行了性能比较,进而指出协同式神经网络在真实汉字图像识别性能上具有极大的优势.     

Characterization and Comparative Genomics Analysis of a New Bacteriophage BUCT610 against Klebsiella pneumoniae and Efficacy Assessment in Galleria mellonella Larvae

The spread of multidrug-resistant Klebsiella pneumoniae (MDR-KP) has become an emerging threat as a result of the overuse of antibiotics. Bacteriophage (phage) therapy is considered to be a promising alternative treatment for MDR-KP infection compared with antibiotic therapy. In this research, a lytic phage BUCT610 was isolated from hospital sewage. The assembled genome of BUCT610 was 46,774 bp in length, with a GC content of 48%. A total of 83 open reading frames (ORFs) and no virulence or antimicrobial resistance genes were annotated in the BUCT610 genome. Comparative genomics and phylogenetic analyses showed that BUCT610 was most closely linked with the Vibrio phage pYD38-A and shared 69% homology. In addition, bacteriophage BUCT610 exhibited excellent thermal stability (4–75 °C) and broad pH tolerance (pH 3–12) in the stability test. In vivo investigation results showed that BUCT610 significantly increased the survival rate of Klebsiella pneumonia-infected Galleria mellonella larvae from 13.33% to 83.33% within 72 h. In conclusion, these findings indicate that phage BUCT610 holds great promise as an alternative agent with excellent stability for the treatment of MDR-KP infection.     

Topical Omega-3 Fatty Acids Eyedrops in the Treatment of Dry Eye and Ocular Surface Disease: A Systematic Review

Dry eye is a common inflammatory condition of the ocular surface. While oral omega-3 supplementation for its treatment has been extensively studied, recent large-scale studies have cast doubt on their efficacy. However, efficacy of topical omega-3 has yet to be reviewed. We performed a systematic search of PubMed, Embase, and Cochrane databases for all studies evaluating topical omega-3 in dry eye. Five human and five animal studies were included. Of the five human studies, two were on dry eye disease (DED), one was on contact lens discomfort, and two were on patients undergoing corneal collagen crosslinking. In humans, there is promising evidence for improved ocular surface staining and tear break-up time compared to controls, equivocal evidence for improvements to ocular surface symptoms and meibomian gland dysfunction, and no effect on increasing tear production. Data from animal models largely agree with these findings, and further reveal decreased inflammatory cytokines and monocyte infiltration. Our review suggests that topical omega-3 is a promising treatment for dry eye, but also points to the paucity of evidence in this field. Further trials in humans are required to characterize effects of topical omega-3 and optimize its dosage.     

Formation and Phase Behavior of Winsor Type III <Emphasis Type="Italic">Jatropha curcas</Emphasis>-Based Microemulsion Systems

The formation and phase behavior of Jatropha curcas-based microemulsion systems, which could potentially be used in enhanced oil recovery applications, has been investigated. Winsor type III microemulsions were obtained by adding n-octane to Winsor type I microemulsion systems prepared using various concentrations of alkyl polyglucoside (APG). To optimize the formulation of type III microemulsion systems, five different types of co-surfactants, i.e. normal butyl alcohol (NBA), isobutyl alcohol, isopropyl alcohol, fatty acid alcohol C8 (FAC8) and fatty acid alcohol C8/C10 (FAC8/C10) were used. The microemulsion phase behavior was determined along with particle size distributions by dynamic light scattering measurements. Results show that the optimum Winston type III system can be achieved by mixing 3 wt% of NBA, 1 wt% APG and 3 wt% NaCl. At the optimum formulation, the IFT reached a minimum value (0.016 mN/m) and formed very small emulsion droplets with a narrow particle size distribution.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

Improving Properties of Poly(vinylidene fluoride) by Adding Expanded Graphite without Surface Modification via Water‐Assisted Mixing Extrusion

Expanded graphite (EG) is introduced into poly(vinylidene fluoride) (PVDF) by melt mixing extrusion with water injection. The results demonstrate that the unfunctionalized EG in composite prepared with water injection exbibits better dispersion than that in the one prepared without water injection due to the promoting role of water during extrusion. Thus, the PVDF/EG composite with loading of 4 wt% prepared by water‐assisted mixing extrusion (WAME) exhibits electrical conductivity of about three orders of magnitude higher than the neat PVDF and one order of magnitude higher than the one prepared without water injection. Comparing to the neat PVDF, the thermal conductivity of the composites prepared with and without water injection is increased by 101.5% and 75.0%, respectively. The introduced EG leads to increased Young’s modulus and tensile strength especially for the composite prepared by WAME. The present work indicates that WAME can promote the dispersion of EG in PVDF matrix without any extra functionalization.     

Molecular Characterization and Growth Association of Two Apolipoprotein A-Ib Genes in Common Carp (Cyprinus carpio)

Apolipoprotein A-I (ApoA-I) is functionally involved in the transportation and metabolism of lipids in vertebrates. In this study, two isoforms of apoA-Ib in common carp (Cyprinus carpio L.) were characterized. Sequence comparison and phylogenetic analysis showed that C. carpio ApoA-Ib is relatively conserved within cyprinid fishes. During embryonic development, C. carpio apoA-Ib was first expressed at the stage of multi-cells, and the highest mRNA level was observed at the stage of optic vesicle. A ubiquitous expression pattern was detected in various tissues with extreme predominance in the liver. Significantly different expression levels were observed between light and heavy body weight groups and also in the compensatory growth test. Seventeen and eight single-nucleotide polymorphisms (SNPs) were identified in matured mRNA of the C. carpio apoA-Ib.1 and apoA-Ib.2, respectively. Two of these SNPs (apoA-Ib.2-g.183A>T and apoA-Ib.2-g.1753C>T) were significantly associated with body weight and body length in two populations of common carp. These results indicate that apoA-Ib may play an important role in the modulation of growth and development in common carp.     

超声降解铬黑T及亚甲蓝的实验研究

尝试采用超声波技术对铬黑T及亚甲基蓝两种模拟染料废水进行降解实验。以脱色率为指标,分别考察pH值、超声功率强度、超声时间和温度等因素对两种模拟染料废水脱色作用的影响。结果表明:超声波技术对铬黑T及亚甲基蓝两种模拟染料废水具有一定的脱色能力,随着pH值的增大,脱色能力减弱。常温下,在pH=1.79附近、超声时间120min,超声功率0.7kw时,亚甲基蓝模拟染料废水的脱色率为27.60%,铬黑T模拟染料废水的脱色率为20.33%。进一步地采用超声波与水合二氧化锰联用技术,可以极大提高有机染料的降解效率,水合二氧化锰投加量为40mg/L时,亚甲基蓝模拟染料废水的脱色率达到92.48%。