基于高抗热震性能的陶瓷刀具材料的微观结构设计

本文以现有的抗热震断裂和抗热震损伤的评价理论为基础，通过对材料中微裂纹的长度进行预测，从而实现了对陶瓷刀具材料的抗热震性能的微观结构设计。根据此理论对现有材料的抗热震性能的进行预测，预测结果与实际的测量结果相符，验证了该理论的正确性。     

2-巯基苯并噻唑衍生物摩擦学性能的研究

合成了S—(1—(2—苯并噻唑基巯基)—2—羟基)—丙基N，N—二烷基二硫代氨基甲酸酯和S—(1—(2—苯并噻唑基巯基)—2—乙酰基)—丙基N，N—二烷基二硫代氨基甲酸酯两种化合物。运用IR、MS、HNMR和元素分析等分析方法对其结构进行表征。用四球试验、HQ—l环块试验分别考察了其对润滑油的极压承载能力及抗磨减摩性能的影响。结果表明：在350SN中性油中添加所合成的化合物后可以显著降低四球长磨后磨斑直径、有效地降低摩擦副之间的摩擦系数，拥有优良的摩擦学性能。     

煤基链篦机-回转窑一步法直接还原设备改造及技术操作要点

本文主要论述了煤基链篦机-回转窑一步法直接还原关键设备改造及有关技术操作要点，并提出了进一步提高产量，稳定操作，延长作业周期，降低生产成本的技术改造方案。     

软启动器在深井泵电动机上的应用

论述了几种三相交流异步电动机的起动方式及其优缺点 ,介绍了新型的电子软启动方式在我厂深井泵电动机上的应用及取得的运行效果 ,为电动机软启动方式在工矿企业中的应用提供了应用经验。     

舰艇电子战综合对抗系统应用探讨

通过对现代海上电子战特点深刻探讨。分析了现代海战条件对舰船电子战对抗能力需求。并对现代舰船电子战综合对抗系统所采用的新技术情况进行探讨。     

Surfactant behavior and its influence on the viscosity of associative thickeners solutions, thickened latex dispersions, and waterborne latex coatings

Surfactants, varying in their chemical composition and hydrophobic behavior, are used in the formulation of a waterborne coating. These differences influence their aggregation in micellar structures, their interaction with associative thickeners, and in particular, the synergies present in their competitive adsorptions on the disperse phases in a waterborne coating. Adsorption of HEUR thickeners on latexes and the ability of surfactants to displace them from those surfaces is an important variable in the dispersion’s viscosity. With large particle latexes, viscosity increases arise primarily from the network built through the interaction of HEURs with surfactants in the aqueous phase. Fluorescence is used to verify the mechanism by which surfactants enhance associative thickener viscosities. That is best achieved with nonionic surfactants, because of their synergies with large hydrophobe HEURs at low concentration. With decreasing latex particle size the adsorbed species is an important contributor to the dispersion’s viscosity through its contribution to the latex’s effective volume fraction increase and when the size of the adsorbed HEUR is matched to the separation distances of the latex at 0.25 volume fraction. Achieving controlled shear-thinning behavior in small particle size latex paints with the economic constraints on the amount of HEUR required to obtain 90 KU viscosities are discussed. Presented at the 80th Annual Meeting of the Federation of Societies for Coatings Technology, October 30–November 1, 2002, in New Orleans, LA. Polymer and Coatings Dept., Fargo, ND 58103.     

质子交换铌酸锂波导MMI光功分器

利用三维非旁轴近似光束传输法对退火质子交换铌酸锂渐变折射率分布波导中的自镜像效应进行分析与模拟 .在此基础上 ,利用退火质子交换技术在 X切 Y传铌酸锂衬底上进一步制作了 1× 8MMI光功分器 .测试表明器件实现了 1路分成 8路的光功分功能 .     

Effect of thermal treatment on ZnO substrate for epitaxial growth

ZnO is a highly efficient photon emitter, and has optical and piezoelectric properties that are attractive for a variety of applications in sensors and potentially optoelectronic devices such as emitters. Due to its identical stacking order and close lattice match to GaN, it is also being developed as a substrate material for GaN epitaxy. However, the surface finish of the ZnO is such that much of the damage induced by sawing and follow up mechanical polishing remains. We developed a thermal treatment method to eliminate surface damage on the 0 face of ZnO (0 0 0 1) to prepare it for epitaxial growth. Atomic force microscopy images of ZnO (0 0 0 1) annealed at 1050 °C for 3 h etc. show that residual scratches from mechanical polishing are removed and atomically flat, terrace-like surfaces are attained. In addition, low-temperature photoluminescence and high-resolution X-ray diffraction measurements have been employed to investigate the effect of annealing on ZnO substrates.     

TPS/TDC3000系统串口通讯的规划与应用

针对TPS/TDC30 0 0系统串口通讯方式、机理进行了一般性的介绍 ,对规划与应用中常见的的问题 ,根据实际工程应用经验提出了解决方案。     

稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。