中间层成分对GTD-111/IN-718高温合金在瞬时液相连接过程中显微组织和力学性能的影响

研究使用不同的中间层瞬时液相连接两种异种高温合金的适用性.在1100℃、不同时间下瞬时液相连接GTD-111/IN-718体系,研究BNi-2、BNi-3和BNi-9三种类型的中间层对该体系显微组织和力学性能的影响.采用场发射扫描电子显微镜和能量色散光谱技术,研究接头区域的成分变化和显微组织.结果表明,非热凝固区Ni3...     

Inspection and Monitoring of Concrete Structures via Radiography and Weighted Nuclear Norm Minimization Method

Russian Journal of Nondestructive Testing - The location of reinforcement bar in concrete, the bar corrosion, diameter and the depth below the surface are important factors in the evaluation of the...     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.     

Simultaneously energy production and dairy wastewater treatment using bioelectrochemical cells: In different environmental and hydrodynamic modes

A successful design, previously adapted for treatment of complex wastewaters in a microbial fuel cell (MFC), was used to fabricate two MFCs, with a few changes for cost reduction and ease of construction. Performance and electrochemical characteristics of MFCs were evaluated in different environmental conditions (in complete darkness and presence of light), and different flow patterns of batch and continuous in four hydraulic retention times from 8 to 30 h. Changes in chemical oxygen demand, and nitrate and phosphate concentrations were evaluated. In contrast to the microbial fuel cell operated in darkness (D-MFC) with a stable open circuit voltage of 700 mV, presence of light led to growth of other species, and consecutively low and unsteady open circuit voltage. Although the performance of theMFC subjected to light (L-MFC)was quite lowand unsteady in dynamic state (internal resistance = 100 Ω, power density = 5.15 W·m^-3), it reached power density of 9.2 W·m^-3 which was close to performance of D-MFC (internal resistance = 50 Ω, power density = 10.3 W·m^-3). Evaluated only for D-MFC, the coulombic efficiency observed in batch mode (30%) was quite higher than the maximum acquired in continuous mode (9.6%) even at the highest hydraulic retention time. In this study, changes in phosphate and different types of nitrogen existing in dairy wastewater were investigated for the first time. At hydraulic retention time of 8 h, the orthophosphate concentration in effluent was 84% higher compared to influent. Total nitrogen and total Kjeldahl nitrogen were reduced 70% and 99% respectively at hydraulic retention time of 30 h, while nitrate and nitrite concentrations increased. The microbial electrolysis cell (MEC), revamped from D-MFC, showed the maximum gas production of 0.2 m³ H₂·m^-3·d^-1 at 700 mV applied voltage.     

Practical evaluation of relationship between concrete resistivity,water penetration,rapid chloride penetration and compressive strength

There are several factors and test methods for evaluating the durability of concrete. In recent years a great deal of attention has been paid to research and development of relationships of these parameters for production of sustainable concretes: water penetration and Rapid Chloride Penetration Test (RCPT) methods which are most commonly used to evaluate the permeability of concrete are two of the most famous methods specified by BS EN-12390-8:2000 and ASTM C1202 respectively. Concrete surface resistivity (SR) test is also a suitable indicator for concrete penetration and chloride ion permeability. It is a non-destructive, simple, rapid and economical method that can also be used on site.The present study is an exploratory research concerned with the relationship of these methods. Based on the correlation of concrete resistivity with water penetration and Rapid Chloride Penetration Test (RCPT) results, two new models for relating these parameters are presented.     

Numerical simulation of two-phase mass transport in three-dimensional naturally fractured reservoirs using discrete streamlines

Simulation of multiphase mass transport in large field-scale heterogeneous, naturally fractured reservoirs with common grid-based methods is very time consuming and costly. An in-house streamline-based simulator is extended to simulate two-phase flow of oil and water in 3D heterogeneous, naturally fractured reservoirs. Different waterflooding problems have been simulated in 2D and 3D fractured reservoirs, and their results are compared with those of the grid-based commercial software. It has been shown that the streamline-based simulator can predict the results of the grid-based software with an acceptable accuracy, while its computational time and required memory is exceptionally less than the grid-based method.     

Numerical and experimental investigation of vortex breaker effectiveness on the improvement in launch vehicle ballistic parameters

The focus of the present study is to investigate the effectiveness of installing vortex breakers at the outlet of launch vehicle tanks on postponing vortex formation and decreasing the critical height of propellants while discharging. Analytical results in the absence of a vortex breaker show that the effects of the Weber and Reynolds numbers in the flow field can be ignored for values greater than 720 and 1.1 × 10⁵, respectively; and critical height can be considered as a function of Froude number under aforementioned conditions. The analytical criteria are verified by two-dimensional, axis symmetrical, transient and two-phase numerical model. Eventually, some experiments are conducted to examine the effectiveness of the applied vortex breakers in reduction of the critical height of propellant. Experimental results show that a 30% decrease can be achieved in critical height by using a particular type of vortex breaker. Additionally, the carried out simulations for an existing two-stage launch vehicle indicate a 13% increase in orbital altitude, which in turn proves the considerable improvement in launch vehicle mass/energetic capabilities.     

Evaluation of Lepidium sativum seed and guar gum to improve dough rheology and quality parameters in composite rice–wheat bread

The effects of hydrocolloids in rice–wheat flour were studied. Hydrocolloids at 0%, 0.3%, 0.6% and 1% w/w (flour basis) and guar (G), Lepidium sativum seed (L) and guar-L. sativum seed (GL) gum were tested as additives to the rice/flour in various combinations. The quality parameters for the experiment were assessed with farinography, extensography, amylography and texture profile analysis. The evaluation of dough rheology showed that water absorption, dough development time, dough stability and viscosity all increased with the addition of hydrocolloids alone or in a combination. It was demonstrated that G₁L₁ promoted the highest effect. The mixing tolerance index and gelatinization temperature decreased with an increased hydrocolloid concentration. Extensibility value for the dough that incorporated guar and L. sativum seed gum increased with increasing hydrocolloid concentration from 0.3% to 0.6% and then decreased at 1%. The water activity of all bread didn't have significant differences with increasing hydrocolloids concentration but this parameter 24 decreased during storage. Firmness decreased with increasing hydrocolloid concentration and increased with increasing storage time. The sensory evaluation by a consumer panel gave the higher score for overall acceptability to G_0.3L_0.3 and G_0.3L_0.6 samples. The results also showed that G₁L₁, G₁L_0.6 and G_0.6L₁ samples had high specific volume and porosity.     

Accurate analysis of spectral regrowth of nonlinear power amplifier driven by cyclostationary modulated signals

In this paper we present an exact analytical expression to calculate the spectral regrowth at the output of a nonlinear power amplifier (PA) using the higher order cumulants and Poisson summation formula. This PA is driven by the filtered digitally modulated signals. To improve the accuracy of the calculations, the cyclosationarity of the input signal is considered. Moreover, closed-form expressions for the 1-dB compression and saturation points are extracted as a function of the PA model parameters, higher order statistics of the input signal, and the transfer function of the pulse shaping filter. In addition, an analytical expression for the adjacent channel power (ACP) and a closed-form expression of the ACP ratio are derived. This is followed by investigation of the effect of the PA nonlinearity on the performance of receiver. Simulation studies are carried out to verify the accuracy of the derived expressions. Excellent agreement between the analytical and simulation results is achieved.