Predicting crack growth rate vs. temperature behaviour of Type 304 stainless steel in dilute sulphuric acid solutions

The coupled-environment fracture model for intergranular stress corrosion cracking of Type 304 stainless steel in boiling water reactor primary (water) heat transport circuits containing relatively pure water has been extended to incorporate the effects of sulphuric acid additions to the coolant and to include thermal activation of the crack tip strain rate. These extensions allow comparisons to be made between theoretically estimated and experimentally determined crack growth rates (CGRs) over a considerable temperature range after calibration at a single temperature. The model predicts, in agreement with experiment, that the CGR passes through a maximum with increasing temperature at a temperature of about 180 °C. The temperature dependence of the CGR is attributed to the competing effects of temperature on the thermally activated processes that occur at the crack tip and the properties (including ECP and conductivity) of the external environment.     

Hohlfaser-Membrankontaktoren zur Stickstoffrückgewinnung aus Prozesswasser einer kommunalen Kläranlage

Process water deriving from digested sludge dewatering at municipal wastewater treatment plants (WWTP) represents an additional load for the plant in terms of nitrogen. Münster WWTP is the first German plant to operate an innovative full-scale membrane contactor facility for nitrogen removal and recovery from process water. Within the scope of this study, aspects influencing the membrane performance and operation as well as utilization of the produced fertilizer are investigated. First results reveal nitrogen removal efficiencies around 85 % and a regional usability of the produced fertilizer.     

Photoactivation of Cell-Free Expressed Archaerhodopsin-3 in a Model Cell Membrane

Transmembrane receptor proteins are located in the plasma membranes of biological cells where they exert important functions. Archaerhodopsin (Arch) proteins belong to a class of transmembrane receptor proteins called photoreceptors that react to light. Although the light sensitivity of proteins has been intensely investigated in recent decades, the electrophysiological properties of pore-forming Archaerhodopsin (Arch), as studied in vitro, have remained largely unknown. Here, we formed unsupported bilayers between two channels of a microfluidic chip which enabled the simultaneous optical and electrical assessment of the bilayer in real time. Using a cell-free expression system, we recombinantly produced a GFP (green fluorescent protein) labelled as a variant of Arch-3. The label enabled us to follow the synthesis of Arch-3 and its incorporation into the bilayer by fluorescence microscopy when excited by blue light. Applying a green laser for excitation, we studied the electrophysiological properties of Arch-3 in the bilayer. The current signal obtained during excitation revealed distinct steps upwards and downwards, which we interpreted as the opening or closing of Arch-3 pores. From these steps, we estimated the pore radius to be 0.3 nm. In the cell-free extract, proteins can be modified simply by changing the DNA. In the future, this will enable us to study the photoelectrical properties of modified transmembrane protein constructs with ease. Our work, thus, represents a first step in studying signaling cascades in conjunction with coupled receptor proteins.     

Moderate Compared to Low Dietary Intake of trans-Fatty Acids Impairs Strength of Old and Aerobic Capacity of Young SAMP8 Mice in Both Sexes

The senescence accelerated SAMP8 mouse is a model for sarcopenia and provides an opportunity to study the effects of lifelong dietary composition on the loss of physical function with age. We studied the effects of trans-fatty acids (2 % of total energy, TFA diet) on the loss of strength and aerobic exercise capacity (VO₂peak) with age. SAMP8 mice were studied at two ages (young, 25 weeks; old, 60 weeks) and on two diets (control vs TFA). Body composition, grip strength, VO₂peak, blood metabolites, and biochemical parameters were assessed. Body weight, fat mass, and body fat percentage all increased with age (p < 0.05) but were not significantly impacted by diet. There was a significant age-related decline in total grip strength as well as that normalized to fat-free mass (FFM) (p < 0.05) with a further decrease at old age in these metrics of strength on the TFA diet vs control diet (p < 0.05). Total VO₂peak exhibited no change with age or diet, but when normalized to FFM, VO₂peak exhibited age and TFA-related declines (p < 0.05). Intramuscular triacylglycerol (p < 0.05) and collagen content (p < 0.05) significantly increased with age, while blood triacylglycerol was increased by the TFA diet (p < 0.05). These data further characterize the SAMP8 mouse as a model for sarcopenia and indicate that dietary fatty acid composition can impact the degree of this age-related loss of physical function.     

Material Evidence for Multiple Firings of Ancient Athenian Red‐Figure Pottery

The production of Athenian fine ware pottery, produced between the 6th and 4th centuries B.C., required alternating the high‐temperature kiln between oxidative and reductive environments during a single firing to create the iconic red and black decorative scenes. Here, we show that the production of this pottery was even more complex, with vessels subjected to two, or possibly more, firings in the kiln, with applications of slip between each firing. On a representative sherd, we compared three painted black decorative features—relief line, contour line, and background slip. Scanning transmission electron microscopy (STEM) of the slips revealed that the relief line had a more melted microstructure than either the contour line or background slip. By characterizing the chemistry and micromorphology of the slips, we find that the relief line microstructure could only be produced through a separate firing, at a hotter temperature, than the other two decorative features.     

Hydrido‐Cobalt Catalyst as a Selective Tool for the Dimerisation of Arylacetylenes: Scope and Theoretical Studies

A simple hydrido‐cobalt complex efficiently catalyses the highly regio‐ and stereoselective dimerisation of various terminal arylacetylenes under mild conditions. The corresponding (E)‐1,4‐enynes are obtained as sole isomers with good to excellent yields. DFT calculations revealed that the reaction proceeds via a C H activation/hydrocobaltation pathway.

     

Highly organised and dense vertical silicon nanowire arrays grown in porous alumina template on <100> silicon wafers

In this work, nanoimprint lithography combined with standard anodization etching is used to make perfectly organised triangular arrays of vertical cylindrical alumina nanopores onto standard <100>−oriented silicon wafers. Both the pore diameter and the period of alumina porous array are well controlled and can be tuned: the periods vary from 80 to 460 nm, and the diameters vary from 15 nm to any required diameter. These porous thin layers are then successfully used as templates for the guided epitaxial growth of organised mono-crystalline silicon nanowire arrays in a chemical vapour deposition chamber. We report the densities of silicon nanowires up to 9 × 10⁹ cm⁻² organised in highly regular arrays with excellent diameter distribution. All process steps are demonstrated on surfaces up to 2 × 2 cm². Specific emphasis was made to select techniques compatible with microelectronic fabrication standards, adaptable to large surface samples and with a reasonable cost. Achievements made in the quality of the porous alumina array, therefore on the silicon nanowire array, widen the number of potential applications for this technology, such as optical detectors or biological sensors.     

Safer energetic materials by a nanotechnological approach

Energetic materials - explosives, thermites, populsive powders - are used in a variety of military and civilian applications. Their mechanical and electrostatic sensitivity is high in many cases, which can lead to accidents during handling and transport. These considerations limit the practical use of some energetic materials despite their good performance. For industrial applications, safety is one of the main criteria for selecting energetic materials. The sensitivity has been regarded as an intrinsic property of a substance for a long time. However, in recent years, several approaches to lower the sensitivity of a given substance, using nanotechnology and materials engineering, have been described. This feature article gives an overview over ways to prepare energetic (nano-)materials with a lower sensitivity.     

Mechanism and determinants of nanoparticle penetration through human skin

The ability of nanoparticles to penetrate the stratum corneum was the focus of several studies. Yet, there are controversial issues available for particle penetration due to different experimental setups. Meanwhile, there is little known about the mechanism and determinants of their penetration. In this paper the penetration of four model gold nanoparticles of diameter 6 and 15 nm, differing in surface polarity and the nature of the vehicle, through human skin was studied using multiphoton microscopy. This is in an attempt to profoundly investigate the parameters governing particle penetration through human skin. Our results imply that nanoparticles at this size range permeate the stratum corneum in a similar manner to drug molecules, mainly through the intercellular pathways. However, due to their particulate nature, permeation is also dependent on the complex microstructure of the stratum corneum with its tortuous aqueous and lipidic channels, as shown from our experiments performed using skin of different grades of barrier integrity. The vehicle (toluene-versus-water) had a minimal effect on skin penetration of gold nanoparticles. Other considerations in setting up a penetration experiment for nanoparticles were also studied. The results obtained are important for designing a new transdermal carrier and for a basic understanding of skin-nanoparticle interaction.     

Influence of temperature on the release of inorganic species during high temperature gasification of Rhenish lignite

Na-, K-, Cl, and S-species are of concern due to their relation to problems of corrosion and fouling in IGCC power systems. The aim of this work was to get more information on the influence of temperature on the release of Na-, K-, S-, and Cl-species. Therefore, lab-scale gasification experiments with four different lignites at 1100 °C, 1400 °C, and 1700 °C were carried out. The hot gas was analysed by molecular beam mass spectrometry. The results show a strong influence of temperature on the release. Two release phases, devolatilisation and char reactions phase, were observed. The phase of main release was devolatilisation. The main species released were ³⁴H₂S⁺, ³⁶HCl⁺, ³⁹K⁺/³⁹NaO⁺, ⁵⁸NaCl⁺, ⁶⁰COS⁺, and ⁶⁴SO₂⁺. ⁵⁶KOH⁺ and ⁷⁴KCl⁺ were released with signal intensity slightly above the signal background. The quantified data show several effects of the temperature on the release. The release trends of ³⁶HCl⁺ and ⁵⁸NaCl⁺ are contrary. Evidences are given that the major release mechanism is the dissociation of carboxylic bond Na species. The mechanism is able to explain the temperature dependence as well.