Polypropylene composite reinforced with fibrillated curaua fiber and using maleic anhydride as coupling agent

Curaua fibers (CF) were fibrillated using high‐intensity ultrasonication, which is fast and uses water as a solvent. The fibrillated fibers (CF_f) were used as reinforcement (20 wt %) in polypropylene composites processed by extrusion with or without 2 wt % of polypropylene grafted with maleic anhydride (PPMA). Fibrillation promotes an increase from 11.3 to 33.8 in the aspect ratio of the fiber. Sonication caused extraction of lignin and a decrease in the degree of crystallinity of the CF. Extrusion of the composites causes no additional fibrillation of the CF. A composite reinforced with CF_f had tensile and flexural strength of 24.9% and 51.5%, respectively, higher than that of pristine PP. The use of PPMA and CF_f in the composite promotes a further increase of 30% and 50.5% in these parameters, respectively. A thermal analysis of the composites using CF_f with or without PPMA showed similar behavior. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44913.     

Design of different planar geometries of antenna arrays for isoflux radiation in GEO satellites

The synthesis of different planar geometries of antenna arrays for isoflux radiation is presented in this paper. This synthesis considers the reduction of the side lobe level and the isoflux radiation requirements for Geostationary Earth Orbit satellites. The behavior of the radiation is studied in three geometries of two-dimensional antenna arrays such as uniform planar arrays, aperiodic planar arrays (APA) and concentric ring arrays (CRA). The well-known methods of genetic algorithm and particle swarm optimization are utilized for the optimization problem. In this way, the designs of APA and CRA presented in this paper could provide an acceptable solution for reducing the antenna hardware and simplifying the power feeding even more than results presented previously in the literature.     

Determination of Sulphiting Agents in Raw and Processed Meat: Comparison Between a Modified Monier-Williams Method and the Direct Analysis by Ion Chromatography with Conductometric Detection

Sulphiting agents are a class of compounds that are used as preservatives since they release SO₂ in food. Regarding meat products, the legislation restricts the use of these food additives, due to some toxic effects that they may have in humans. The most employed analytical procedure for the determination of sulphiting agents in foodstuffs is the Monier-Williams (M-W) method, but the reliability of this method was called into question by several authors. In this work, the M-W method was modified by replacing both the distillation unit to shorten the extraction time (from hours to 5 min) and the final titration with a chromatographic separation followed by conductometric detection of sulphate ion (m-M-W/IC-CD). This method was then validated, and the performance parameters were compared with those of the method based on the direct analysis of sulphite ion by ion chromatography with conductometric detection (DIC-CD). Linearity, accuracy at 40 and 80 mg kg^?1 of SO₂ and measurement uncertainty resulted comparable. Accuracy at 10 mg kg^?1 of SO₂ resulted higher for the m-M-W/IC-CD method, but this parameter could be influenced by traces of other sulphur-containing compounds that may be present in meat. The limit of determination of the m-M-W/IC-CD method was slightly higher than that obtained by the DIC-CD method. Finally, through spiking tests, it was proved that sulphide, 2-methyl-3-furanthiol and l-methionine cause “false-positive” responses, by using M-W-based methods.     

Efficiency Enhancement of Single‐Walled Carbon Nanotube‐Silicon Heterojunction Solar Cells Using Microwave‐Exfoliated Few‐Layer Black Phosphorus

Carbon nanotube‐silicon (CNT‐Si)‐based heterojunction solar cells (HJSCs) are a promising photovoltaic (PV) system. Herein, few‐layer black phosphorus (FL‐BP) sheets are produced in N‐methyl‐2‐pyrrolidone (NMP) using microwave‐assisted liquid‐phase exfoliation and introduced into the CNTs‐Si‐based HJSCs for the first time. The NMP‐based FL‐BP sheets remain stable after mixing with aqueous CNT dispersion for device fabrication. Due to their unique 2D structure and p‐type dominated conduction, the FL‐BP/NMP incorporated CNT‐Si devices show an impressive improvement in the power conversion efficiency from 7.52% (control CNT‐Si cell) to 9.37%. Our density‐functional theory calculation reveals that lowest unoccupied molecular orbital (LUMO) of FL‐BP is higher in energy than that of single‐walled CNT. Therefore, we observed a reduction in the orbitals localized on FL‐BP upon highest occupied molecular orbital to LUMO transition, which corresponds to an improved charge transport. This study opens a new avenue in utilizing 2D phosphorene nanosheets for next‐generation PVs.     

Meteorological and oceanographic conditions in the northern Adriatic Sea during the period June 1999-July 2002: influence on the mucilage phenomenon

Mucilage events (formation of very large organic aggregates and gelatinous surface layers) have been documented several times during the past two centuries in the northern Adriatic Sea (NA), while their frequency has significantly increased since 1988. In this work, meteorological and oceanographic conditions in the NA during the period June 1999-July 2002 are described and their relation to the outbreak and fate of the mucilage phenomenon was investigated. Salinity and temperature data were collected during approximately monthly cruises along three transects in the NA. Relevant meteorological situations (air temperature, rainfall, wind) were selected from large-scale ECMWF analyses and from the Local Analysis and Prediction System (LAPS; Emilia Romagna Meteorological Service), while sea conditions (waves) were analysed by means of the Wave Adriatic Model (WAM). Data for air temperature, rainfall, and wind from several meteorological stations in the region were used. Average seasonal cycles of sea temperature and salinity simulated with statistical models, based on historical data collected in the NA since 1972, were used to determine thermal and haline anomalies. The monthly anomaly variability of maximum and minimum air temperatures, rainfall amount and number of rainy days did not appear to be relevant for the mucilage phenomenon outbreak. In contrast, both vertical and horizontal thermohaline gradients in the region were more developed during late spring and summer of 2000 and particularly of 2002, when the mucilage events were of greatest extent in space and time, compared to 2001 (short-lived event) and 1999 (no event). These more pronounced gradients were due to a combination of several unusual conditions: sharp heating of the sea surface in May-June, domination of eastwards transport of freshened waters formed in the Po Delta area, and intrusion of very high salinity intermediate waters originating in the eastern Mediterranean. Moreover, in winter of both 2000 and 2002 very dense and cold water formed and remained in the bottom layer until spring, contributing to increase the stratification degree of the water column. The duration of the mucilage events and their spatial distribution in the region depend strongly on meteorological changes. Recurrent anticyclonic conditions, characterized by low wind and calm sea, favour extended events in time (up 2 months in 2002). In contrast, highly perturbed weather, particularly due to strong "bora" wind, can be determined in sharp decay of the event (e.g. in July 2000).     

Effects of simulated deposition of acid mist and iron ore particulate matter on photosynthesis and the generation of oxidative stress in Schinus terebinthifolius Radii and Sophora tomentosa L

Particulate matter is a natural occurrence in the environment, but some industries, such as the iron ore sector, can raise the total amount of particles in the atmosphere. This industry is primarily a source of iron and sulfur dioxide particulates. The effects of the pollutants from the iron ore industries on representatives of restinga vegetation in a Brazilian coastal ecosystem were investigated using physiological and biochemical measures. Two species, Schinus terebinthifolius and Sophora tomentosa, were exposed to simulated deposition of acid mist and iron ore particulate matter in acrylic chambers in a greenhouse. Parameters such as gas exchange, fluorescence emission, chlorophyll content, total iron content, antioxidant enzyme activity and malondialdehyde content were assessed in order to evaluate the responses of the two species. Neither treatment was capable of inducing oxidative stress in S. terebinthifolius. Nevertheless, the deposition of iron ore particulates on this species increased chlorophyll content, the maximum quantum efficiency of photosystem II and the electron transport rate, while iron content was unaltered. On the other hand, S. tomentosa showed a greater sensitivity to the treatments. Plants of S. tomentosa that were exposed to acid mist had a decrease in photosynthesis, while the deposition of iron particulate matter led to an increase in iron content and membrane permeability of the leaves. The activities of antioxidant enzymes, such as catalases and superoxide dismutase, were enhanced by both treatments. The results suggested that the two restinga species use different strategies to overcome the stressful conditions created by the deposition of particulate matter, either solid or wet. It seems that while S. terebinthifolius avoided stress, S. tomentosa used antioxidant enzyme systems to partially neutralize oxidative stress. The findings also point to the potential use of S. tomentosa as a biomarker species under field conditions.