Evaluating mechanical properties and degradation of YTZP dental implants

Lately new biomedical grade yttria stabilized zirconia (YTZP) dental implants have appeared in the implantology market. This material has better aesthetical properties than conventional titanium used for implants but long term behaviour of these new implants is not yet well known. The aim of this paper is to quantify the mechanical response of YTZP dental implants previously degraded under different time conditions and compare the toughness and fatigue strength with titanium implants. Mechanical response has been studied by means of mechanical testing following the ISO 14801 for Standards for dental implants and by finite element analysis. Accelerated hydrothermal degradation has been achieved by means of water vapour and studied by X-ray diffraction and nanoindentation tests. The results show that the degradation suffered by YTZP dental implants will not have a significant effect on the mechanical behaviour. Otherwise the fracture toughness of YTZP ceramics is still insufficient in certain implantation conditions.     

Chlorinated Polycyclic Aromatic Hydrocarbons Associated with Drinking Water Disinfection: Synthesis,Formation under Aqueous Chlorination Conditions and Genotoxic Effects

Polycyclic aromatic hydrocarbons (PAHs) are among the most persistent and toxic organic micropollutants present in water and several of them are mutagenic and carcinogenic. Although it has been shown that chlorinated derivatives of PAHs (Cl-PAHs) may be formed during the water chlorination procedure, little is known about their potential genotoxic and carcinogenic effects. The objectives of the present work were to prepare and characterize the major chlorinated derivatives of benzo[a]pyrene (BaP) and fluoranthene (Fluo), to develop an analytical methodology for their quantification in water samples and to analyse their potential genotoxicity. Chlorinated standards were prepared by a newly developed two phase method (water/n-hexane) using sodium hypochlorite. 6-Chloro-benzo[a]pyrene was selectively obtained from BaP, while 1,3-dichloro-fluoranthene and 3-chloro-fluoranthene were obtained from Fluo. All products were isolated and characterized by nuclear magnetic resonance and mass spectrometry. The formation of BaP- and Fluo-chlorinated derivatives under aqueous chlorination conditions was observed using a SPE-HPLC-FLD methodology. In addition, the cytotoxic and genotoxic activities of the three chlorinated derivatives were analyzed in comparison to their parent compounds, in a human-derived hepatoma cell line using the neutral red uptake and comet assays, respectively. The results showed that, at the equimolar doses of 100 and 125 μM, 6-Cl-BaP was able to induce a significantly higher level of DNA damage than BaP, suggesting a more potent genotoxic effect. In contrast, neither Fluo nor its chlorinated derivatives were genotoxic in the same cell line. The identification of new and possibly hazardous water chlorination by-product from PAHs emphasizes the need to minimize total organic carbon content of raw water and the implementation of safer water disinfection methods.     

Effect of uranium (VI) on two sulphate-reducing bacteria cultures from a uranium mine site

This work was conducted to assess the impact of uranium (VI) on sulphate-reducing bacteria (SRB) communities obtained from environmental samples collected on the Portuguese uranium mining area of Urgeiriça. Culture U was obtained from a sediment, while culture W was obtained from sludge from the wetland of that mine. Temperature gradient gel electrophoresis (TGGE) was used to monitor community changes under uranium stress conditions. TGGE profiles of dsrB gene fragment demonstrated that the initial cultures were composed of SRB species affiliated with Desulfovibrio desulfuricans, Desulfovibrio vulgaris and Desulfomicrobium spp. (sample U), and by species related to D. desulfuricans (sample W). A drastic change in SRB communities was observed as a result of uranium (VI) exposure. Surprisingly, SRB were not detected in the uranium removal communities. Such findings emphasize the need of monitoring the dominant populations during bio-removal studies. TGGE and phylogenetic analysis of the 16S rRNA gene fragment revealed that the uranium removal consortia are composed by strains affiliated to Clostridium genus, Caulobacteraceae and Rhodocyclaceae families. Therefore, these communities can be attractive candidates for environmental biotechnological applications associated to uranium removal.     

Magnetically Controlled Carbonate Nanocomposite with Ciprofloxacin for Biofilm Eradication

Biofilms are the reason for a vast majority of chronic inflammation cases and most acute inflammation. The treatment of biofilms still is a complicated task due to the low efficiency of drug delivery and high resistivity of the involved bacteria to harmful factors. Here we describe a magnetically controlled nanocomposite with a stimuli-responsive release profile based on calcium carbonate and magnetite with an encapsulated antibiotic (ciprofloxacin) that can be used to solve this problem. The material magnetic properties allowed targeted delivery, accumulation, and penetration of the composite in the biofilm, as well as the rapid triggered release of the entrapped antibiotic. Under the influence of an RF magnetic field with a frequency of 210 kHz, the composite underwent a phase transition from vaterite into calcite and promoted the release of ciprofloxacin. The effectiveness of the composite was tested against formed biofilms of E. coli and S. aureus and showed a 71% reduction in E. coli biofilm biomass and an 85% reduction in S. aureus biofilms. The efficiency of the composite with entrapped ciprofloxacin was higher than for the free antibiotic in the same concentration, up to 72%. The developed composite is a promising material for the treatment of biofilm-associated inflammations.     

Advances and Applications of Biodegradable Elastomers in Regenerative Medicine

When elastomers were first proposed as useful materials for regenerative medicine a few decades ago, their high versatility and suitability for a diverse and wide range of in vivo applications could not have been predicted. Due to their ability to recover after deformation, these materials were first introduced in tissue engineering in an attempt to mimic the mechanical properties of the extracellular matrix. Furthermore, elastomeric characteristics have been described as important criteria for cell interaction by modulating cellular behavior. From soft to hard tissues, elastomers have demonstrated degradation, mechanical, and biocompatibility requirements in accordance with the target tissue. In this feature article, biodegradable synthetic polyester elastomers that have been reported in the literature are discussed, with special focus on those that show promise for in vivo tissue replacement. Their satisfactory performance in vivo shows the promise of elastomers for use in regenerative medicine. However, further investigation is required to demonstrate the prospect of elastomer‐based therapies in clinical trials.     

Assessing regulatory emotional self-efficacy in three countries.

The Regulatory Emotional Self-Efficacy (RESE) scale was developed to assess perceived self-efficacy in managing negative (NEG) and in expressing positive (POS) affect (G. V. Caprara & M. Gerbino, 2001). In this study of young adults, the factorial structure of the RESE scale was found to be similar in Italy, the United States, and Bolivia. In addition to a factor for POS, NEG was represented by a second-order factor of 2 different negative affects: despondency-distress (DES) and anger-irritation (ANG). Overall, there was partial invariance at both metric and scalar levels across gender and countries. Discriminant and convergent validity of the RESE scale was further examined in the Italian sample. Stronger patterns of association of POS with prosocial behavior, of ANG with low aggressive behavior problems and irritability, and of DES with low anxiety/depressive problems and shyness and high self-esteem were found. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Chemical changes in the volatile fractions of Brazilian honeys during storage under tropical conditions

The chemical transformations of the volatile fractions of two different Brazilian honeys (cashew and marmeleiro) were monitored during storage under tropical conditions. Five systems, namely: 1 – fresh samples; 2 and 3 – samples heated for 3 and 6 months at 35 – 40 °C; 4 and 5 – samples kept under similar conditions to systems 2 and 3, but containing sodium metabisulphite, were tested. The transformations noted in the volatile fractions of these honeys could be mainly associated to acid or enzymatic hydrolysis of glycosides, volatilization, oxidation or esterification processes. The formation of furan derivatives, linalool derivatives and esters appears to be quite affected by the sodium metabisulphite. The concentrations of most powerful odorants increased during the storage (e.g.: benzenemethanol and isovaleric acid) or remained unchangeable (e.g.: vanillin, furfuryl mercaptan, 2-methoxyphenol).     

Robust Multilayer Control for Enhanced Wireless Telemedical Video Streaming

M-health is an emerging area of research and one of the key challenges in future research in this area is medical video streaming over wireless channels. Contrasting requirements of almost lossless compression and low available bandwidth have to be tackled in medical quality video streaming in ultrasound and radiology applications. On one side, compression techniques need to be conservative, in order to avoid removing perceptively important information; on the other side, error resilience and correction should be provided, with the constraint of a limited bandwidth. A quality-driven, network-aware approach for joint source and channel coding based on a controller structure specifically designed for enhanced video streaming in a robotic teleultrasonography system is presented. The designed application based on robotic teleultrasonography is described and the proposed method is simulated in a wireless environment in two different scenarios; the video quality improvement achievable through the proposed scheme in such an application is remarkable, resulting in a peak signal-to-noise ratio (PSNR) improvement of more than 4 dB in both scenarios.