Particle Sizes of Fumed Silica

Fumed silica is a synthetic amorphous silicon dioxide produced by burning silicon tetrachloride in an oxygen-hydrogen flame. Surface areas range from 50–400 m²/g. Using particle sizing techniques, fumed silica shows micron sized particles leading to surface areas markedly lower than expected. Fumed silica appears as a fluffy solid with bulk densities down to 0.03 g/cm³, being invariant over the wide range of surface areas. Attempts to relate the variation of the surface area directly to the performance of fumed silica in technical applications, such as its thickening efficiency in fluids, mainly fail and remain ambiguous.     

Isotopic and fluid inclusion study of hydrothermal and metamorphic carbonates in the Larderello geothermal field and surrounding areas, Italy

Fluid inclusions have been studied on six calcite veins from the shallow part (480 to 1515 m below ground level) of the Larderello geothermal field and outcropping in peripheral zones of the geothermal area. Oxygen and carbon isotopic analyses have been carried out on these carbonate veins, as well as on the dolostone layers found inside the Paleozoic metamorphic units of the deep part of the field (from 1939 to 3177 m below ground level). Fluid inclusion observations suggest that boiling processes probably occurred during calcite precipitation in most of the veins. The fluids that formed or interacted with the calcite veins below the uppermost reservoir (made up of Mesozoic marine carbonates), and with the calcite hydrothermal veins of Sassa, were characterised by an apparent salinity from 1.3 to 5.3 wt.% NaCl eq. and a homogenisation temperature from 137 to 245°C. The fluid inclusions related to the calcite veins hosted above the uppermost reservoir show a wide range of apparent salinity (from 1.7 to 22.2 wt.% NaCl eq.) and homogenisation temperatures from 224 to 296°C. Apparent salinity/homogenisation temperature covariations of the latter veins are interpreted as being the result of a mixing process between a low-temperature, high-salinity fluid and a higher-temperature, moderate-salinity fluid. The oxygen isotopic compositions of the calcite veins (δ¹⁸O from 10.34 to 11.45‰) located below the Mesozoic carbonates and in the outcrops (δ¹⁸O from 9.42 to 17.07‰) indicate that the vapour in equilibrium with these veins was isotopically similar to the present-day discharge steam. The aqueous fluids in equilibrium with these veins could be meteoric water that interacted with the Mesozoic carbonates of the upper reservoir. The δ¹³C values of the CO₂ produced at Larderello and the constant concentration of this gas over time are, however, indicative of a deep source inside the reservoir that is probably related to the decarbonation reaction within the metamorphic units that form the present-day deep reservoir. Fluid inclusion salinities (up to 22.2 wt.% NaCl eq.) and isotopic results (δ¹⁸O from 13.43 to 21.99‰, δ¹³C between −1.26 and −0.18‰) on the calcite veins hosted above the uppermost reservoir suggest that the water circulating in these veins has strongly interacted with Mesozoic carbonates or Neogene sediments containing evaporite layers. The isotopic values (δ¹⁸O from 14.09 to 19.91‰, δ¹³C from −4.09 to 1.90‰) of dolomite samples present in the Paleozoic metamorphic rocks indicate a reaction with fluid of variable temperatures under different water/rock ratios. The isotopic composition of one sample reveals equilibrium with present-day discharge fluids. This fact aside, the remaining data indicate that the Paleozoic dolomitic layers do not seem to contribute significantly to the production of CO₂.     

Impact of Cigarette Smoking on the Expression of Oxidative Stress-Related Genes in Cumulus Cells Retrieved from Healthy Women Undergoing IVF

The female reproductive system represents a sensitive target of the harmful effects of cigarette smoke, with folliculogenesis as one of the ovarian processes most affected by this exposure. The aim of this study was to analyze the impact of tobacco smoking on expression of oxidative stress-related genes in cumulus cells (CCs) from smoking and non-smoking women undergoing IVF techniques. Real time PCR technology was used to analyze the gene expression profile of 88 oxidative stress genes enclosed in a 96-well plate array. Statistical significance was assessed by one-way ANOVA. The biological functions and networks/pathways of modulated genes were evidenced by ingenuity pathway analysis software. Promoter methylation analysis was performed by pyrosequencing. Our results showed a down-regulation of 24 genes and an up-regulation of 2 genes (IL6 and SOD2, respectively) involved in defense against oxidative damage, cell cycle regulation, as well as inflammation in CCs from smoking women. IL-6 lower promoter methylation was found in CCs of the smokers group. In conclusion, the disclosed overall downregulation suggests an oxidant-antioxidant imbalance in CCs triggered by cigarette smoking exposure. This evidence adds a piece to the puzzle of the molecular basis of female reproduction and could help underlay the importance of antioxidant treatments for smoking women undergoing IVF protocols.     

Metal-Specificity Divergence between Metallothioneins of Nerita peloronta (Neritimorpha,Gastropoda) Sets the Starting Point for a Novel Chemical MT Classification Proposal

Metallothioneins’ (MTs) biological function has been a matter of debate since their discovery. The importance to categorize these cysteine-rich proteins with high coordinating capacity into a specific group led to numerous classification proposals. We proposed a classification based on their metal-binding abilities, gradually sorting them from those with high selectivity towards Zn/Cd to those that are Cu-specific. However, the study of the NpeMT1 and NpeMT2isoforms of Nerita peloronta, has put a new perspective on this classification. N. peloronta has been chosen as a representative mollusk to elucidate the metal-binding abilities of Neritimorpha MTs, an order without any MTs characterized recently. Both isoforms have been recombinantly synthesized in cultures supplemented with Zn^II, Cd^II, or Cu^II, and the purified metal–MT complexes have been thoroughly characterized by spectroscopic and spectrometric methods, leading to results that confirmed that Neritimorpha share Cd-selective MTs with Caenogastropoda and Heterobranchia, solving a so far unresolved question. NpeMTs show high coordinating preferences towards divalent metal ions, although one of them (NpeMT1) shares features with the so-called genuine Zn-thioneins, while the other (NpeMT2) exhibits a higher preference for Cd. The dissimilarities between the two isoforms let a window open to a new proposal of chemical MT classification.     

Grafting reactions onto polyorganophosphazenes. V. Photostabilization of poly[bis(4-benzylphenoxy)-phosphazene] by light-induced grafting copolymerization of acrylate polymers containing pendant HALS moieties

The light-induced grafting reaction of acrylate monomers containing hindered piperidine groups (HALS) onto poly[bis(4-benzylphenoxy)phosphazene] is described as a function of several different experimental parameters, i.e., type of photoinitiator (benzophenone or benzoin ethyl ether), monomer concentration, solvent composition, light intensity, and swelling of the polyphosphazene films. The obtained phosphazene-g-HALS-containing acrylate-grafted copolymers, irradiated with light of wavelength longer than 300 nm under accelerated photooxidative conditions to test the photostabilizing ability of the grafted HALS groups, showed that the hindered piperidine groups grafted onto the polyphosphazene matrix are able to considerably depress the damage caused to the poly[bis(4-benzylphenoxy)phosphazene] films during light exposure. The efficiency of this process seems to be related to the amount of HALS residues grafted onto the phosphazene substrates. © 1996 John Wiley & Sons, Inc.     

Reactive blending methodologies for biopol

Multicomponent polymeric systems containing Biopol as one of the phases are described as obtained according to two different procedures: radical polymerization of an acrylic polymer in the presence of Biopol, and melt-mixing of Biopol with polycaprolactone in the presence of peroxide. The decomposition of peroxide causes, in both cases, the formation of intergrafted species responsible for interfacial activity and compatibilization. The results of chemical, chemical–physical, morphological and mechanical tests, confirming the occurrence of such interactions, are reported.     

Influence of ionic liquid on graphite/silver nanoparticles dispersion and antibacterial properties against Escherichia coli of PP/EPDM composite coatings

In this work, graphite doped with silver nanoparticles are synthesized and coated onto a PP/EPDM blend surface. Three nanoparticles deposition methods are used. In one method, the nanoparticles are directly deposited on previously corona discharge-treated TPO surface. Another method is by compression deposition of nanoparticles in a thin layer forming a segregated coating. In the last method, a nanoparticle-polymer composite is deposited and then treated by corona discharge to expose the deposited nanoparticles. These last two methods show excellent antimicrobial activity (R = 2.8 and 3.9, respectively) and higher inhibition values (85% and 89%, respectively) against Escherichia coli strains. The effect of using HMIMPF6 and BMIMBF4 ionic liquids on particle dispersion and antibacterial activity against E. coli is evaluated. Using ionic liquids enhance the antibacterial activity (from R = 3.9 to 5.4) and inhibition rates (from 89% to 99.8%) of the samples. As a result, a thermoplastic elastomer (TPE) material with enhanced antibacterial properties against E. coli is obtained using ionic liquids, which offer significant promise as a material for medical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48714.     

Development of active cassava starch cellulose nanofiber-based films incorporated with natural antimicrobial tea tree essential oil

In the present study, a cassava starch-glycerol film with reinforcement of Pinus sp. nanofibers (NFC) incorporated with tea tree (Melaleuca alternifolia) essential oil (TTO) were prepared by casting technique. The physical (barrier, mechanical, and optical), structural, and antimicrobial properties of the films were evaluated and compared with the control films. Films with 0.08% TTO exhibited a significant increase in the tensile strength (TS) while films with 1.5% TTO showed a decrease in TS, suggesting a crosslinking effect. The addition of 1.5% TTO reduced the water vapor permeability values in 43% comparing to the control films. Analysis obtained by Fourier transform infrared spectroscopy showed bands related to the interaction between TTO and matrix for films with 1.5% TTO and 0.3% NFC. This film was effective against Staphylococcus aureus and Candida albicans which could be applied for several packaging purposes. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48726.