Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.     

Effect of the nature and structure of pillared clays in the catalytic behaviour of supported manganese oxide

In the present work, the complete oxidation of acetone has been studied over a series of supported manganese oxide catalysts on the unpillared and the Al- and Zr-pillared forms of two natural clays, a montmorillonite and a saponite. A significant influence of the clay supports characteristics on the catalytic performance has been found. The following order of improving catalytic performance is established with respect to the pillars composition: Al-pillared clays < unpillared clays < Zr-pillared clays.     

Composition and thermal properties of Rhea oil and its fractions

The rhea (Rhea americana) is a large running bird of the ratite family, native to South America. Oil extracted from rhea fat tissue is used in cosmetic manufacture. Here, the thermal behaviour and the fatty acid and triacylglycerol composition of Uruguayan rhea oil are studied. The results are compared with those obtained from two commercial samples of emu oil. The fatty acid profiles of emu and rhea oils are similar. Small variations are reflected in the non‐identical thermal behaviour of the oils. The solid content of both oils is fairly similar at room temperature. Thus, emu oil and rhea oil may replace one another in certain formulations, without resulting in important changes in physicochemical behaviour. The semisolid rhea oil was fractionated in two successive stages: an olein was obtained at 15 °C, which was refractionated at 10 °C. The thermogram of the olein obtained by cooling at 15 °C does not have the peak found at 34 °C in the thermogram of the original oil and is a softer product than the original oil. A further stage of fractionation of this olein produced a new liquid phase of slightly different thermal behaviour from that of the original olein. This product has a solid fat index around 7% at 15 °C and has melted completely at 20 °C. This second olein has more appropriate physical characteristics than those of the olein obtained from the first fractionation when used in liquid cosmetic formulations.     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

How changes affect software entropy: an empirical study

Context Software systems continuously change for various reasons, such as adding new features, fixing bugs, or refactoring. Changes may either increase the source code complexity and disorganization, or help to reducing it. Aim This paper empirically investigates the relationship of source code complexity and disorganization—measured using source code change entropy—with four factors, namely the presence of refactoring activities, the number of developers working on a source code file, the participation of classes in design patterns, and the different kinds of changes occurring on the system, classified in terms of their topics extracted from commit notes. Method We carried out an exploratory study on an interval of the life-time span of four open source systems, namely ArgoUML, Eclipse-JDT, Mozilla, and Samba, with the aim of analyzing the relationship between the source code change entropy and four factors: refactoring activities, number of contributors for a file, participation of classes in design patterns, and change topics. Results The study shows that (i) the change entropy decreases after refactoring, (ii) files changed by a higher number of developers tend to exhibit a higher change entropy than others, (iii) classes participating in certain design patterns exhibit a higher change entropy than others, and (iv) changes related to different topics exhibit different change entropy, for example bug fixings exhibit a limited change entropy while changes introducing new features exhibit a high change entropy. Conclusions Results provided in this paper indicate that the nature of changes (in particular changes related to refactorings), the software design, and the number of active developers are factors related to change entropy. Our findings contribute to understand the software aging phenomenon and are preliminary to identifying better ways to contrast it.     

Scalable and leaderless Byzantine consensus in cloud computing environments

Traditional Byzantine consensus in distributed systems requires n ≥ 3f + 1, where n is the number of nodes. In this paper, we present a scalable and leaderless Byzantine consensus implementation based on gossip, requiring only n ≥ 2f + 1 nodes. Unlike conventional distributed systems, the network topology of cloud computing systems is often not fully connected, but loosely coupled and layered. Hence, we revisit the Byzantine consensus problem in cloud computing environments, in which each node maintains some number of neighbors, called local view. The message complexity of our Byzantine consensus scheme is O(n), instead of O(n ²). Experimental results and correctness proof show that our Byzantine consensus scheme can solve the Byzantine consensus problem safely in a scalable way without a bottleneck and a leader in cloud computing environments.     

An Active Disturbance Rejection Approach to Leader‐Follower Controlled Formation

This article describes the design of a linearizing, observer‐based, robust dynamic feedback control scheme for output reference trajectory tracking tasks in a leader‐follower non‐holonomic car formation problem. The approach is based on the cars' kinematic models. A radical simplification in the form of a global ultra‐model is proposed on the follower's exact open loop position tracking error dynamics obtained via flatness considerations. This results in a system described by an additively disturbed set of two, second order integrators with non‐linear velocity dependent control input gain matrix. The unknown additive disturbances are modeled as absolutely uniformly bounded time signals which may be locally approximated by arbitrary elements of a sufficiently high degree family of Taylor polynomials. Linear high‐gain Luenberger observers of the generalized proportional integral (GPI) type may be readily designed. These observers include the self updating internal model of the unknown disturbance input vector components in the form of generic, instantaneous, time‐polynomial models. The proposed (GPI) observers, which are the dual counterpart of GPI controllers [17], achieve a simultaneous disturbance estimation and tracking error phase variables estimation. This on‐line gathered information is used to advantage on the follower's feedback controller thus allowing for a simple, yet efficient, disturbance and control input gain cancelation effort. The results are applied to have the follower track a time‐delayed version of the actual leader's trajectory. Experimental results are presented which illustrate the robustness and viability of the proposed approach.     

A quantitative feedback solution to the multivariable tracking error problem

This paper introduces a novel solution for the multi‐input multi‐output (MIMO) quantitative feedback theory control design problem with tracking error specifications. Looking for a minimum controller overdesign, the technique finds new controller quantitative feedback theory bounds based on necessary and sufficient conditions for the existence of suitable associated prefilter matrix elements. It improves previous approaches to the subject and includes (i) the possibility of a free selection of the nominal plant, (ii) a less conservative application of the Schwartz inequality to decisively reduce the potential controller overdesign, (iii) a methodology to design independently the elements of the prefilter matrix, and (iv) a scope of application to both sequential and nonsequential MIMO controller design methods. The benefits of the new control design technique are illustrated by means of two examples. The first one, a standard 2 × 2 MIMO problem, is provided for comparison purposes with previous approaches. The second example, included as a major control challenge, deals with a well‐known demanding distillation column benchmark problem. Copyright © 2013 John Wiley & Sons, Ltd.     

Relation of swelling and Tg depression to the apparent free volume of a particle‐filled,epoxy‐based adhesive

The effect of hygrothermal aging on a particle‐filled, epoxy‐based adhesive was studied using a gravimetric sorption technique. This study has explored moisture sorption characteristics as well as the associated behaviors of swelling and the depression of the glass transition temperature (T_g). We observed that the diffusion of water in this adhesive has a non‐Fickian behavior, and the depression of T_g proceeds to a definite value that is independent of the final equilibrium water content of the system. Our observations suggest that water diffuses into the polymer in a dual‐sorption mode, in which water resides in two populations. In one population, water is considered to occupy apparent free volume of the adhesive, and the second population water infiltrates polymer structure and forms hydrogen‐bonded clusters. Our results show that hygrothermal aging temperature and swelling do not alter the apparent free volume of this adhesive. We conclude that the constant value of T_g depression at saturation implies that only water in the apparent free volume is responsible for the T_g depression, whereas the swelling proceeds through the formation of hydrogen bonds in the adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1436–1444, 2003     

Very long chain PUFA in murine testicular triglycerides and cholesterol esters

Very long chain (VLC) PUFA of the n−6 and n−3 series are known to occur in mammalian testis. The aim of this work was to characterize further two testicular lipid classes with VLCPUFA, cholesterol esters (CE) and total triglycerides (TG) in rat and mouse testis. The VLCPUFA predominating in these lipids were a series of n−6 pentaenes and tetraenes with 24 to 32 carbons, including small amounts of odd-chain PUFA, 28∶5n−6 and 24∶5n−6 prevailing in CE and TG, respectively. Most of the VLCPUFA of TG were concentrated in a small fraction of TG, made up by 1-O-alkyl-2,3-DAG. This TG subclass was absent altogether from the TG of sexually immature testis. The TG and the CE with VLCPUFA only occurred in testis of adult fertile animals. The proportion of VLCPUFA in total TG and CE was higher in rodents than in other mammals. In the n−6 PUFA-rich adult mouse testis, the amounts of testicular triacylglycerols decreased significantly after consumption of fish oil for 2 wk. Whereas 18∶2n−6 was significantly reduced, the amounts of 22∶5n−6 and longer n−6 PUFA were less affected in all mamor testicular lipids including PC and PE, where they were unchanged. The 1-O-alkyl-2,3-DAG and their n−6 VLCPUFA were virtually unaffected by the diet. The VLCPUFA-containing molecular species of CE and TG may represent a form of storage of cholesterol and polyenoic FA required to sustain spermatogenesis. Via chain-shortening, VLCPUFA stored in the neutral lipids may serve as precursors of the major C₂₂ PUFA typical of cell membrane glycerophospholipids, protecting testicular cells against shifts in FA composition induced by dietary changes.