确保粮食安全和环境可持续发展的水土资源利用

主要讨论灌溉农业所面临的挑战.随着人均可用水量的不断下降,灌溉农业必须提高水资源利用效率,同时进一步采用有利于环境的经营和管理方式.灌溉界面临的压力是如何通过提高作物产量和用水效率来实现生产率的最大化.今后的发展方向是以更加高效率、有成效的方式利用水资源,而实现从"提高每滴水的粮食产量"向"少用水,多产粮"的转变,则有助于该目标的实现.为了尽可能减小外在因素的影响,将来的努力方向是在全面性和整体性上下工夫.     

Design and Implementation of Optical Signal Reinstatement Technique for High DPSK RZ Transceiver Scheme

Wireless Personal Communications - Optical signal reinstatement (OSR) is a common technique used in high-speed communication systems. OSR can be achieved using various techniques such as;...     

The effect of heat treatments on the properties of Ti/Pt heating elements for gas sensor applications

Ti/Pt as heating element for gas sensor applications was fabricated on silicon (Si) wafer substrate. The fabricated device was subjected to heat treatment at different prescribed time periods for thermal stability. The energy dispersion spectroscopy (EDS) results of the device indicated that there were no Ti traces on the Pt surface after heat treatment at 450 °C for 3 and 4 h in an argon (Ar) atmosphere. A maximum temperature coefficient of resistance (TCR) with a value of 2.88×10^?3 K^?1 was obtained for the device with 3 h heat treatment.     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

In-Flight Synthesis of Core–Shell Mg/Si–SiOx Particles with Greatly Reduced Ignition Temperature

Magnesium is a promising candidate as a solid fuel for energetic applications, however, the diffusion-controlled oxidation mechanism impedes its reaction with an oxidizer, often resulting in diminished performance. In this study, non-thermal plasma processing is implemented to modify the surface of magnesium nanoparticles with silicon in-flight, in the gas-phase to enhance the rate of interfacial reactions and tune the ignition pathways. Allowing the silicon coating to partially oxidize provides direct contact between the fuel and oxidizer, resulting in a nanostructured thermite system at the single particle level. The proximal distance between oxidizer and fuel directly impacts the ignition temperature and, therefore, the combustion kinetics. An intermetallic reaction occurs within the magnesium/silicon system to supplement the heating of the magnesium fuel to initiate its reaction with the oxidizer, resulting in highly reduced ignition thresholds. The ignition temperature is lowered significantly from ≈740 °C for magnesium particles with a native oxide layer to ≈520 °C for particles coated via the in-flight plasma process.     

Four-wave mixing reduction technique based on smart filter approach

This paper proposed a new technique to suppress the four-wave mixing (FWM) effect by using a smart filter technique. The behaviour of FWM and the performance of wavelength division multiplexing systems with 4 and 16 channels were simulated in the presence of the proposed technique. The simulation was also performed under different parameters such as input power, number of channels and channel spacing. The FWM power drastically decreases by 12 and 19 dB for the 4 and 16 channels, respectively, when the smart filter is used as compared with the conventional system. In terms of system performance, the suggested approach for 4 and 16 channels at the first channel offers low bit error rate (BER) values of 3.23 × 10^?23 and 1.7 × 10^?21, respectively. The smart filter with the channel spacing variation for the 4-channel system subsequently improved the BER value at the fourth channel. Results confirm that the smart filter approach is an active solution that can suppress the FWM effect in optical transmission systems.     

Fabrication of porous ZnO via electrochemical etching using 10 wt% potassium hydroxide solution

We described the fabrication of porous ZnO using the electrochemical etching method. ZnO thin films deposited by radiofrequency sputtering were etched electrochemically using 10 wt% KOH solution as an etching medium to obtain porous ZnO surface structure. A constant voltage of 15 V was applied to enhance the etching process. The etched samples were then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy to examine their structural and optical properties. XRD spectra showed that by performing the electrochemical etching process, porous ZnO could be obtained without severely deteriorating the crystallinity of the samples. Moreover, SEM characterization revealed that hillock-type porous ZnO was fabricated successfully. In addition, the cross-sectional SEM images revealed that there were only minimal changes in the layer thickness after the ZnO had been etched for various lengths of time. This finding shows the dominance of the vertical etching process. Notably, the intensity of PL spectra increased and the PL excitation peak exhibited a red shift trend as the etching time increased. These observations are due to the increase of the surface to volume ratio of the ZnO surface and the strain relaxation along the dislocation and grain boundary.